ar71xx: add support for MikroTik hAP ac lite

This patch adds support for the MikroTik RouterBOARD hAP ac lite
(RB952Ui-5ac2nD).

The hAP ac lite is nearly identical to the hAP, with an added QCA9887
5GHz radio. The 2.4GHz radio ID is also changed in the hAP ac lite.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -239,7 +239,8 @@ rb-750up-r2)
 rb-941-2nd)
 	ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
 	;;
-rb-951ui-2nd)
+rb-951ui-2nd|\
+rb-952ui-5ac2nd)
 	ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
 	ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
 	ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -142,6 +142,7 @@ ar71xx_setup_interfaces()
 	rb-750up-r2|\
 	rb-951ui-2hnd|\
 	rb-951ui-2nd|\
+	rb-952ui-5ac2nd|\
 	routerstation|\
 	tl-wr710n|\
 	tl-wr720n-v3|\

target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches

@@ -28,7 +28,8 @@ rb-912uag-5hpnd)
 	ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
 	;;
 rb-750up-r2|\
-rb-951ui-2nd)
+rb-951ui-2nd|\
+rb-952ui-5ac2nd)
 	ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
 	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
 	;;

target/linux/ar71xx/base-files/etc/diag.sh

@@ -306,6 +306,7 @@ get_status_led() {
 	rb-912uag-5hpnd|\
 	rb-941-2nd|\
 	rb-951ui-2nd|\
+	rb-952ui-5ac2nd|\
 	rb-lhg-5nd|\
 	rb-mapl-2nd)
 		status_led="rb:green:user"

target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -106,6 +106,9 @@ case "$FIRMWARE" in
 	unifiac-pro)
 		ath10kcal_extract "EEPROM" 20480 2116
 		;;
+	rb-952ui-5ac2nd)
+		ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
+		;;
 	esac
 	;;
 "ath10k/cal-pci-0000:01:00.0.bin")

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -905,6 +905,9 @@ ar71xx_board_detect() {
 	*"RouterBOARD 951Ui-2nD")
 		name="rb-951ui-2nd"
 		;;
+	*"RouterBOARD 952Ui-5ac2nD")
+		name="rb-952ui-5ac2nd"
+		;;
 	*"RouterBOARD LHG 5nD")
 		name="rb-lhg-5nd"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -638,6 +638,7 @@ platform_check_image() {
 	rb-750up-r2|\
 	rb-941-2nd|\
 	rb-951ui-2nd|\
+	rb-952ui-5ac2nd|\
 	rb-lhg-5nd|\
 	rb-mapl-2nd)
 		return 0
@@ -690,6 +691,7 @@ platform_pre_upgrade() {
 	rb-750up-r2|\
 	rb-941-2nd|\
 	rb-951ui-2nd|\
+	rb-952ui-5ac2nd|\
 	rb-lhg-5nd|\
 	rb-mapl-2nd)
 		# erase firmware if booted from initramfs

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -942,6 +942,7 @@ config ATH79_MACH_RBSPI
 	  MikroTik RouterBOARD mAP lite
 	  MikroTik RouterBOARD hAP lite
 	  MikroTik RouterBOARD hAP
+	  MikroTik RouterBOARD hAP ac lite
 	  MikroTik RouterBOARD hEX PoE lite
 	  MikroTik RouterBOARD hEX lite
 	  MikroTik RouterBOARD LHG 5

target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c

@@ -4,6 +4,7 @@
  *  - MikroTik RouterBOARD mAP L-2nD
  *  - MikroTik RouterBOARD 941L-2nD
  *  - MikroTik RouterBOARD 951Ui-2nD
+ *  - MikroTik RouterBOARD 952Ui-5ac2nD
  *  - MikroTik RouterBOARD 750UP r2
  *  - MikroTik RouterBOARD 750 r2
  *  - MikroTik RouterBOARD LHG 5nD
@@ -23,6 +24,7 @@
  *  by the Free Software Foundation.
  */
 
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/routerboot.h>
@@ -47,6 +49,7 @@
 #include "dev-usb.h"
 #include "dev-wmac.h"
 #include "machtypes.h"
+#include "pci.h"
 #include "routerboot.h"
 
 #define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
@@ -59,6 +62,7 @@
 #define RBSPI_HAS_SSR		BIT(4)	/* has an SSR on SPI bus 0 */
 #define RBSPI_HAS_POE		BIT(5)
 #define RBSPI_HAS_MDIO1		BIT(6)
+#define RBSPI_HAS_PCI		BIT(7)
 
 #define RB_ROUTERBOOT_OFFSET    0x0000
 #define RB_BIOS_SIZE            0x1000
@@ -490,6 +494,9 @@ static void __init rbspi_peripherals_setup(u32 flags)
 
 	if (flags & RBSPI_HAS_USB)
 		ath79_register_usb();
+
+	if (flags & RBSPI_HAS_PCI)
+		ath79_register_pci();
 }
 
 /*
@@ -597,7 +604,7 @@ static void __init rbhapl_setup(void)
 }
 
 /*
- * The hAP, hEX lite and hEX PoE lite share the same platform
+ * The hAP, hAP ac lite, hEX lite and hEX PoE lite share the same platform
  */
 static void __init rbspi_952_750r2_setup(u32 flags)
 {
@@ -606,8 +613,11 @@ static void __init rbspi_952_750r2_setup(u32 flags)
 
 	rbspi_peripherals_setup(flags);
 
-	/* GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 */
-	rbspi_network_setup(flags, 1, 5, 0);
+	/*
+	 * GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 (hAP),
+	 * WLAN1 MAC IS HW MAC + 6 (hAP ac lite)
+	 */
+	rbspi_network_setup(flags, 1, 5, 6);
 
 	if (flags & RBSPI_HAS_USB)
 		gpio_request_one(RB952_GPIO_USB_POWER,
@@ -628,22 +638,30 @@ static void __init rbspi_952_750r2_setup(u32 flags)
 }
 
 /*
- * Init the hAP hardware (QCA953x).
+ * Init the hAP (ac lite) hardware (QCA953x).
  * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
  * to LAN on the casing, and port 1 being assigned to "internet" (WAN).
  * Port 1 is connected to PHY4 (the ports are labelled in reverse physical
  * number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
  * internal switch for the LAN ports.
  * The device also has USB, PoE output and an SSR used for LED multiplexing.
+ * The 952Ui-5ac2nD (hAP ac lite) is nearly identical to the hAP, it adds a
+ * QCA9887 5GHz radio via PCI and moves 2.4GHz from WLAN0 to WLAN1.
  */
 static void __init rb952_setup(void)
 {
-	u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
+	u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
 			RBSPI_HAS_SSR | RBSPI_HAS_POE;
 
 	if (rbspi_platform_setup())
 		return;
 
+	/* differentiate the hAP from the hAP ac lite */
+	if (strstr(mips_get_machine_name(), "952Ui-5ac2nD"))
+		flags |= RBSPI_HAS_WLAN1 | RBSPI_HAS_PCI;
+	else
+		flags |= RBSPI_HAS_WLAN0;
+
 	rbspi_952_750r2_setup(flags);
 }
 

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -176,7 +176,7 @@ enum ath79_mach_type {
 	ATH79_MACH_RB_941,			/* MikroTik RouterBOARD 941-2nD */
 	ATH79_MACH_RB_951G,			/* Mikrotik RouterBOARD 951G */
 	ATH79_MACH_RB_951U,			/* Mikrotik RouterBOARD 951Ui-2HnD */
-	ATH79_MACH_RB_952,			/* MikroTik RouterBOARD 951Ui-2nD */
+	ATH79_MACH_RB_952,			/* MikroTik RouterBOARD 951Ui-2nD / 952Ui-5ac2nD */
 	ATH79_MACH_RB_CAP,			/* Mikrotik RouterBOARD cAP2nD */
 	ATH79_MACH_RB_LHG5,			/* Mikrotik RouterBOARD LHG5 */
 	ATH79_MACH_RB_MAP,			/* Mikrotik RouterBOARD mAP2nD */

target/linux/ar71xx/image/mikrotik.mk

@@ -31,9 +31,15 @@ define Device/rb-nor-flash-16M
   LOADER_TYPE := elf
   KERNEL_INSTALL := 1
   KERNEL := kernel-bin | lzma | loader-kernel
-  SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-lhg-5nd rb-mapl-2nd
+  SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-lhg-5nd rb-mapl-2nd
   IMAGE/sysupgrade.bin = append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \
 	append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
 endef
 
-TARGET_DEVICES += rb-nor-flash-16M
+define Device/rb-nor-flash-16M-ac
+  $(Device/rb-nor-flash-16M)
+  DEVICE_TITLE := MikroTik RouterBoard with 16 MB SPI NOR flash and ac
+  DEVICE_PACKAGES += kmod-ath10k ath10k-firmware-qca988x ath10k-firmware-qca9887
+endef
+
+TARGET_DEVICES += rb-nor-flash-16M rb-nor-flash-16M-ac