Specification: - SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB)) - RAM: 64 MiB DDR2 - Storage: 16 MiB of flash (optional 16 MiB second flash) - Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) 1x100M (port 4) - PCI-E: x1 - SIMcard slot: x1 - USB 2.0 port: x1 (optional) - Ext GPIO pin: x8 - UART for serial console: x1 - External watchdog: x1 (optional) - Power supply: 9-48V (DC jack/passive PoE) Installation through tftp: - Copy <Firmware Image Name> into tftp directory - Connect board via ttl port and Ethernet port - Boot the AP531B0 - When "Autobooting in 1 seconds" appears press Enter - Set serverip and ipaddr appropriate (e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1) - Enter "tftp 0x8050000 <Firmware Image Name>" - Enter "erase 0x9f050000 +$filesize" - Enter "cp.b 0x80500000 0x9f050000 $filesize" - Enter "reset" Signed-off-by: Shuanglin Liu <roboidler@gmail.com>master
parent
3183015e1e
commit
53ef20f65a
@ -0,0 +1,112 @@ |
||||
/*
|
||||
* Rockeetech AP531B0 11ng wireless AP board support |
||||
* |
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> |
||||
* Copyright (C) 2016 Shuanglin Liu <roboidler@gmail.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/platform_device.h> |
||||
#include <linux/ath9k_platform.h> |
||||
#include <linux/ar8216_platform.h> |
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h> |
||||
|
||||
#include "common.h" |
||||
#include "dev-eth.h" |
||||
#include "dev-gpio-buttons.h" |
||||
#include "dev-leds-gpio.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-spi.h" |
||||
#include "dev-usb.h" |
||||
#include "dev-wmac.h" |
||||
#include "machtypes.h" |
||||
#include "pci.h" |
||||
#include "dev-ap9x-pci.h" |
||||
|
||||
#define AP531B0_GPIO_LED_WLAN 12 |
||||
#define AP531B0_GPIO_LED_STATUS 11 |
||||
|
||||
#define AP531B0_GPIO_RST_BTN 17 |
||||
|
||||
#define AP531B0_KEYS_POLL_INTERVAL 20 /* msecs */ |
||||
#define AP531B0_KEYS_DEBOUNCE_INTERVAL (3 * AP531B0_KEYS_POLL_INTERVAL) |
||||
|
||||
#define AP531B0_WMAC_CALDATA_OFFSET 0x1000 |
||||
|
||||
|
||||
static struct gpio_led ap531b0_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "ap531b0:green:status", |
||||
.gpio = AP531B0_GPIO_LED_STATUS, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "ap531b0:green:wlan", |
||||
.gpio = AP531B0_GPIO_LED_WLAN, |
||||
.active_low = 1, |
||||
} |
||||
}; |
||||
|
||||
static struct gpio_keys_button ap531b0_gpio_keys[] __initdata = { |
||||
{ |
||||
.desc = "reset", |
||||
.type = EV_KEY, |
||||
.code = KEY_RESTART, |
||||
.debounce_interval = AP531B0_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = AP531B0_GPIO_RST_BTN, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
|
||||
static void __init ap531b0_gpio_led_setup(void) |
||||
{ |
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap531b0_leds_gpio), |
||||
ap531b0_leds_gpio); |
||||
|
||||
ath79_register_gpio_keys_polled(-1, AP531B0_KEYS_POLL_INTERVAL, |
||||
ARRAY_SIZE(ap531b0_gpio_keys), |
||||
ap531b0_gpio_keys); |
||||
} |
||||
|
||||
static void __init ap531b0_setup(void) |
||||
{ |
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
||||
u8 *pmac; |
||||
|
||||
ath79_register_m25p80(NULL); |
||||
ap531b0_gpio_led_setup(); |
||||
ath79_register_usb(); |
||||
ath79_register_pci(); |
||||
|
||||
ath79_register_mdio(0, 0x0); |
||||
|
||||
pmac = art + AP531B0_WMAC_CALDATA_OFFSET + 2; |
||||
ath79_init_mac(ath79_eth0_data.mac_addr, pmac, 1); |
||||
ath79_init_mac(ath79_eth1_data.mac_addr, pmac, 2); |
||||
|
||||
ath79_register_wmac(art + AP531B0_WMAC_CALDATA_OFFSET, pmac); |
||||
|
||||
/* WAN port */ |
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
||||
ath79_eth0_data.speed = SPEED_100; |
||||
ath79_eth0_data.duplex = DUPLEX_FULL; |
||||
ath79_eth0_data.phy_mask = BIT(4); |
||||
ath79_register_eth(0); |
||||
|
||||
/* LAN ports */ |
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
||||
ath79_eth1_data.speed = SPEED_1000; |
||||
ath79_eth1_data.duplex = DUPLEX_FULL; |
||||
ath79_switch_data.phy_poll_mask |= BIT(4); |
||||
ath79_switch_data.phy4_mii_en = 1; |
||||
ath79_register_eth(1); |
||||
} |
||||
|
||||
MIPS_MACHINE(ATH79_MACH_AP531B0, "AP531B0", "Rockeetech AP531B0", |
||||
ap531b0_setup); |
Loading…
Reference in new issue