This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>master
Graham Fairweather
8 years ago
committed by
Álvaro Fernández Rojas
parent
a529b41cff
commit
532c3f3218
@ -0,0 +1,103 @@ |
||||
/dts-v1/; |
||||
|
||||
#include "bcm6368.dtsi" |
||||
|
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
model = "Netgear EVG2000"; |
||||
compatible = "netgear,evg2000", "brcm,bcm6368"; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <20>; |
||||
debounce-interval = <60>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio0 25 1>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&gpio0 26 1>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
voip1_green { |
||||
label = "EVG2000:green:voip1"; |
||||
gpios = <&gpio0 14 1>; |
||||
}; |
||||
voip2_green { |
||||
label = "EVG2000:green:voip2"; |
||||
gpios = <&gpio0 2 1>; |
||||
}; |
||||
inet_red { |
||||
label = "EVG2000:red:inet"; |
||||
gpios = <&gpio0 4 1>; |
||||
}; |
||||
inet_green { |
||||
label = "EVG2000:green:inet"; |
||||
gpios = <&gpio0 5 1>; |
||||
}; |
||||
usb_green { |
||||
label = "EVG2000:green:usb"; |
||||
gpios = <&gpio0 15 1>; |
||||
}; |
||||
power_green { |
||||
label = "EVG2000:green:power"; |
||||
gpios = <&gpio0 22 1>; |
||||
default-state = "on"; |
||||
}; |
||||
power_red { |
||||
label = "EVG2000:red:power"; |
||||
gpios = <&gpio0 23 1>; |
||||
}; |
||||
lan_green { |
||||
label = "EVG2000:green:lan"; |
||||
gpios = <&gpio0 24 1>; |
||||
}; |
||||
wireless_green { |
||||
label = "EVG2000:green:wireless"; |
||||
gpios = <&gpio0 26 1>; |
||||
}; |
||||
wan_green { |
||||
label = "EVG2000:green:wan"; |
||||
gpios = <&gpio0 27 1>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pflash { |
||||
status = "ok"; |
||||
|
||||
linux,part-probe = "bcm63xxpart"; |
||||
|
||||
cfe@0 { |
||||
label = "CFE"; |
||||
reg = <0x00000000 0x00020000>; |
||||
read-only; |
||||
}; |
||||
|
||||
linux@20000 { |
||||
label = "linux"; |
||||
reg = <0x00020000 0x00f40000>; |
||||
}; |
||||
|
||||
board_data@f60000 { |
||||
label = "board_data"; |
||||
reg = <0x00f60000 0x00080000>; |
||||
read-only; |
||||
}; |
||||
|
||||
nvram@fe0000 { |
||||
label = "nvram"; |
||||
reg = <0x00fe0000 0x00020000>; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,62 @@ |
||||
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
|
||||
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
|
||||
@@ -2014,6 +2014,43 @@ static struct board_info __initdata boar
|
||||
.num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
|
||||
};
|
||||
|
||||
+static struct sprom_fixup __initdata EVG2000_fixups[] = {
|
||||
+ { .offset = 219, .value = 0xec08 },
|
||||
+};
|
||||
+
|
||||
+static struct board_info __initdata board_EVG2000 = {
|
||||
+ .name = "96369PVG",
|
||||
+ .expected_cpu_id = 0x6368,
|
||||
+
|
||||
+ .has_uart0 = 1,
|
||||
+ .has_pci = 1,
|
||||
+ .has_ohci0 = 1,
|
||||
+ .has_ehci0 = 1,
|
||||
+ .num_usbh_ports = 2,
|
||||
+
|
||||
+ .has_enetsw = 1,
|
||||
+ .enetsw = {
|
||||
+ .used_ports = {
|
||||
+ [5] = {
|
||||
+ .used = 1,
|
||||
+ .phy_id = 0xff,
|
||||
+ .bypass_link = 1,
|
||||
+ .force_speed = 1000,
|
||||
+ .force_duplex_full = 1,
|
||||
+ .name = "RGMII",
|
||||
+ },
|
||||
+ },
|
||||
+ },
|
||||
+ .use_fallback_sprom = 1,
|
||||
+ .fallback_sprom = {
|
||||
+ .type = SPROM_BCM4322,
|
||||
+ .pci_bus = 0,
|
||||
+ .pci_dev = 1,
|
||||
+ .board_fixups = EVG2000_fixups,
|
||||
+ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups),
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
static struct board_info __initdata board_HG655b = {
|
||||
.name = "HW65x",
|
||||
.expected_cpu_id = 0x6368,
|
||||
@@ -2614,6 +2651,7 @@ static const struct board_info __initcon
|
||||
&board_96368mvwg,
|
||||
&board_96368mvngr,
|
||||
&board_DGND3700v1_3800B,
|
||||
+ &board_EVG2000,
|
||||
&board_HG622,
|
||||
&board_HG655b,
|
||||
&board_P870HW51A_V2,
|
||||
@@ -2726,6 +2764,7 @@ static struct of_device_id const bcm963x
|
||||
{ .compatible = "huawei,hg622", .data = &board_HG622, },
|
||||
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
|
||||
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
|
||||
+ { .compatible = "netgear,evg2000", .data = &board_EVG2000, },
|
||||
{ .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
|
||||
#endif
|
||||
#ifdef CONFIG_BCM63XX_CPU_63268
|
||||
Loading…
Reference in new issue