ar7: drop 3.14 support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44822
master
John Crispin 10 years ago
parent 4d11bb0d23
commit 46f01fec7f
  1. 130
      target/linux/ar7/config-3.14
  2. 23
      target/linux/ar7/patches-3.14/001-mips-ar7-fix-serial.patch
  3. 22
      target/linux/ar7/patches-3.14/110-flash.patch
  4. 28
      target/linux/ar7/patches-3.14/120-gpio_chrdev.patch
  5. 300
      target/linux/ar7/patches-3.14/160-vlynq_try_remote_first.patch
  6. 15
      target/linux/ar7/patches-3.14/200-free-mem-below-kernel-offset.patch
  7. 85
      target/linux/ar7/patches-3.14/300-add-ac49x-platform.patch
  8. 20
      target/linux/ar7/patches-3.14/310-ac49x-prom-support.patch
  9. 35
      target/linux/ar7/patches-3.14/320-ac49x-mtd-partitions.patch
  10. 28
      target/linux/ar7/patches-3.14/500-serial_kludge.patch
  11. 118
      target/linux/ar7/patches-3.14/920-ar7part.patch
  12. 95
      target/linux/ar7/patches-3.14/925-actiontec_leds.patch
  13. 52
      target/linux/ar7/patches-3.14/950-cpmac_titan.patch

@ -1,130 +0,0 @@
CONFIG_ADM6996_PHY=y
CONFIG_AR7=y
CONFIG_AR7_GPIO=y
CONFIG_AR7_TI=y
# CONFIG_AR7_TYPE_AC49X is not set
CONFIG_AR7_TYPE_TI=y
CONFIG_AR7_WDT=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_BOOT_ELF32=y
CONFIG_CEVT_R4K=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPMAC=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQ_CPU=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KALLSYMS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_AC49X_PARTS is not set
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MVSWITCH_PHY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SWAP_IO_SPACE=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_VLYNQ=y
# CONFIG_VLYNQ_DEBUG is not set
CONFIG_ZONE_DMA_FLAG=0

@ -1,23 +0,0 @@
From 443ab715a40881d6c9ba11b027ba154bac904cb0 Mon Sep 17 00:00:00 2001
From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Date: Sat, 10 May 2014 23:19:08 +0200
Subject: [PATCH] MIPS/AR7: ensure that serial ports are properly set up
without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
never copied, resulting in a dead port.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
---
arch/mips/ar7/platform.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi
uart_port.type = PORT_AR7;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
+ uart_port.flags = UPF_FIXED_TYPE;
uart_port.regshift = 2;
uart_port.line = 0;

@ -1,22 +0,0 @@
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
-obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -199,7 +199,7 @@ static struct resource physmap_flash_res
.name = "mem",
.flags = IORESOURCE_MEM,
.start = 0x10000000,
- .end = 0x107fffff,
+ .end = 0x11ffffff,
};
static const char *ar7_probe_types[] = { "ar7part", NULL };

@ -1,28 +0,0 @@
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -452,6 +452,15 @@ config MWAVE
To compile this driver as a module, choose M here: the
module will be called mwave.
+config AR7_GPIO
+ tristate "TI AR7 GPIO Support"
+ depends on AR7
+ help
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
+ processors.
+
+ If compiled as a module, it will be called ar7_gpio.
+
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o

@ -1,300 +0,0 @@
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
return 0;
}
+static volatile int vlynq_delay_value_new = 0;
+
+static void vlynq_delay_wait(u32 count)
+{
+ /* Code adopted from original vlynq driver */
+ int i = 0;
+ volatile int *ptr = &vlynq_delay_value_new;
+ *ptr = 0;
+
+ /* We are assuming that the each cycle takes about
+ * 23 assembly instructions. */
+ for(i = 0; i < (count + 23)/23; i++)
+ *ptr = *ptr + 1;
+}
+
static void vlynq_reset(struct vlynq_device *dev)
{
+ u32 rtm = readl(&dev->local->revision);
+
+ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
+ 0 : 0x600000;
+
writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
&dev->local->control);
/* Wait for the devices to finish resetting */
- msleep(5);
+ vlynq_delay_wait(0xffffff);
/* Remove reset bit */
- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
&dev->local->control);
/* Give some time for the devices to settle */
- msleep(5);
+ vlynq_delay_wait(0xffffff);
}
static void vlynq_irq_unmask(struct irq_data *d)
@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
}
EXPORT_SYMBOL(vlynq_unregister_driver);
+enum vlynq_clk_src {
+ vlynq_clk_external,
+ vlynq_clk_local,
+ vlynq_clk_remote,
+ vlynq_clk_invalid,
+};
+
+static int __vlynq_set_clocks(struct vlynq_device *dev,
+ enum vlynq_clk_src clk_dir,
+ int lclk_div, int rclk_div)
+{
+ u32 reg;
+
+ if (clk_dir == vlynq_clk_invalid) {
+ printk(KERN_ERR "%s: attempt to set invalid clocking\n",
+ dev_name(&dev->dev));
+ return -EINVAL;
+ }
+
+ reg = readl(&dev->local->control);
+ if (readl(&dev->local->revision) < 0x00010205) {
+ if (clk_dir & vlynq_clk_local)
+ reg |= VLYNQ_CTRL_CLOCK_INT;
+ else
+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
+ }
+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
+ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
+ writel(reg, &dev->local->control);
+
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
+ dev_name(&dev->dev), readl(&dev->local->revision));
+ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
+ dev_name(&dev->dev), readl(&dev->remote->revision));
+
+ reg = readl(&dev->remote->control);
+ if (readl(&dev->remote->revision) < 0x00010205) {
+ if (clk_dir & vlynq_clk_remote)
+ reg |= VLYNQ_CTRL_CLOCK_INT;
+ else
+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
+ }
+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
+ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
+ writel(reg, &dev->remote->control);
+
+ if (!vlynq_linked(dev))
+ return -ENODEV;
+
+ return 0;
+}
+
/*
* A VLYNQ remote device can clock the VLYNQ bus master
* using a dedicated clock line. In that case, both the
@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
int i;
vlynq_reset(dev);
- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
- dev->dev_id ? i++ : i--) {
+ for (i = 0; i <= 7; i++) {
if (!vlynq_linked(dev))
break;
- writel((readl(&dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
- &dev->remote->control);
- writel((readl(&dev->local->control)
- & ~(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_MASK)) |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
- &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
- dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
- dev->divisor = i;
+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
+ printk(KERN_INFO
+ "%s: using remote clock divisor %d\n",
+ dev_name(&dev->dev), i + 1);
+ dev->divisor = i + vlynq_rdiv1;
return 0;
} else {
vlynq_reset(dev);
@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
*/
static int __vlynq_try_local(struct vlynq_device *dev)
{
- int i;
+ int i, dir = !dev->dev_id;
vlynq_reset(dev);
- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
- dev->dev_id ? i++ : i--) {
-
- writel((readl(&dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_MASK) |
- VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
- &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
- dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
- dev->divisor = i;
+ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
+
+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
+ printk(KERN_INFO
+ "%s: using local clock divisor %d\n",
+ dev_name(&dev->dev), i + 1);
+ dev->divisor = i + vlynq_ldiv1;
return 0;
} else {
vlynq_reset(dev);
@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
if (!vlynq_linked(dev))
return -ENODEV;
- writel((readl(&dev->remote->control) &
- ~VLYNQ_CTRL_CLOCK_INT),
- &dev->remote->control);
-
- writel((readl(&dev->local->control) &
- ~VLYNQ_CTRL_CLOCK_INT),
- &dev->local->control);
-
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG "%s: using external clock\n",
- dev_name(&dev->dev));
- dev->divisor = vlynq_div_external;
+ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
+ printk(KERN_INFO "%s: using external clock\n",
+ dev_name(&dev->dev));
+ dev->divisor = vlynq_div_external;
return 0;
}
@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
return result;
switch (dev->divisor) {
- case vlynq_div_external:
case vlynq_div_auto:
/* When the device is brought from reset it should have clock
* generation negotiated by hardware.
* Check which device is generating clocks and perform setup
* accordingly */
- if (vlynq_linked(dev) && readl(&dev->remote->control) &
- VLYNQ_CTRL_CLOCK_INT) {
- if (!__vlynq_try_remote(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_external(dev))
- return 0;
- } else {
- if (!__vlynq_try_external(dev) ||
- !__vlynq_try_local(dev) ||
- !__vlynq_try_remote(dev))
- return 0;
- }
+ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
+ return 0;
+ case vlynq_div_external:
+ if (!__vlynq_try_external(dev))
+ return 0;
break;
case vlynq_ldiv1:
case vlynq_ldiv2:
@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
case vlynq_ldiv6:
case vlynq_ldiv7:
case vlynq_ldiv8:
- writel(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
- vlynq_ldiv1), &dev->local->control);
- writel(0, &dev->remote->control);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using local clock divisor %d\n",
- dev_name(&dev->dev),
- dev->divisor - vlynq_ldiv1 + 1);
+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
+ vlynq_ldiv1, 0)) {
+ printk(KERN_INFO
+ "%s: using local clock divisor %d\n",
+ dev_name(&dev->dev),
+ dev->divisor - vlynq_ldiv1 + 1);
return 0;
}
break;
@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
case vlynq_rdiv6:
case vlynq_rdiv7:
case vlynq_rdiv8:
- writel(0, &dev->local->control);
- writel(VLYNQ_CTRL_CLOCK_INT |
- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
- vlynq_rdiv1), &dev->remote->control);
- if (vlynq_linked(dev)) {
- printk(KERN_DEBUG
- "%s: using remote clock divisor %d\n",
- dev_name(&dev->dev),
- dev->divisor - vlynq_rdiv1 + 1);
+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
+ dev->divisor - vlynq_rdiv1)) {
+ printk(KERN_INFO
+ "%s: using remote clock divisor %d\n",
+ dev_name(&dev->dev),
+ dev->divisor - vlynq_rdiv1 + 1);
return 0;
}
break;
}
-
+ vlynq_reset(dev);
ops->off(dev);
return -ENODEV;
}
@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
platform_set_drvdata(pdev, dev);
printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
- (void *)dev->mem_start);
+ dev_name(&dev->dev), (void *)dev->regs_start,
+ dev->irq, (void *)dev->mem_start);
dev->dev_id = 0;
dev->divisor = vlynq_div_auto;
- result = __vlynq_enable_device(dev);
- if (result == 0) {
+ if (!__vlynq_enable_device(dev)) {
dev->dev_id = readl(&dev->remote->chip);
+ vlynq_reset(dev);
((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
}
if (dev->dev_id)

@ -1,15 +0,0 @@
--- a/arch/mips/ar7/memory.c
+++ b/arch/mips/ar7/memory.c
@@ -66,5 +66,11 @@ void __init prom_meminit(void)
void __init prom_free_prom_memory(void)
{
- /* Nothing to free */
+ /* adapted from arch/mips/txx9/generic/setup.c */
+ unsigned long saddr = PHYS_OFFSET + PAGE_SIZE;
+ unsigned long eaddr = __pa_symbol(&_text);
+
+ /* free memory between prom-record and kernel _text base */
+ if (saddr < eaddr)
+ free_init_pages("prom memory", saddr, eaddr);
}

@ -1,85 +0,0 @@
--- a/arch/mips/ar7/Platform
+++ b/arch/mips/ar7/Platform
@@ -3,4 +3,9 @@
#
platform-$(CONFIG_AR7) += ar7/
cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
-load-$(CONFIG_AR7) += 0xffffffff94100000
+load-$(CONFIG_AR7_TI) += 0xffffffff94100000
+
+#
+# AudioCodes AC49x
+#
+load-$(CONFIG_AR7_AC49X) += 0xffffffff945ca000
--- a/arch/mips/ar7/setup.c
+++ b/arch/mips/ar7/setup.c
@@ -69,6 +69,10 @@ const char *get_system_type(void)
return "TI AR7 (TNETV1056)";
case TITAN_CHIP_1060:
return "TI AR7 (TNETV1060)";
+ case TITAN_CHIP_AC495:
+ return "AudioCodes AC495";
+ case TITAN_CHIP_AC496:
+ return "AudioCodes AC496";
}
default:
return "TI AR7 (unknown)";
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -92,6 +92,8 @@
#define TITAN_CHIP_1055 0x0e
#define TITAN_CHIP_1056 0x0d
#define TITAN_CHIP_1060 0x07
+#define TITAN_CHIP_AC495 0x00
+#define TITAN_CHIP_AC496 0x02
/* Interrupts */
#define AR7_IRQ_UART0 15
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -89,7 +89,7 @@ config AR7
select HAVE_CLK
help
Support for the Texas Instruments AR7 System-on-a-Chip
- family: TNETD7100, 7200 and 7300.
+ family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x.
config ATH79
bool "Atheros AR71XX/AR724X/AR913X based boards"
@@ -796,6 +796,7 @@ config NLM_XLP_BOARD
endchoice
source "arch/mips/alchemy/Kconfig"
+source "arch/mips/ar7/Kconfig"
source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
--- /dev/null
+++ b/arch/mips/ar7/Kconfig
@@ -0,0 +1,26 @@
+if AR7
+
+config AR7_TI
+ bool
+
+config AR7_AC49X
+ bool
+
+choice
+ prompt "AR7 SoC family selection"
+ default AR7_TYPE_TI
+ depends on AR7
+ help
+ Select AR7 MIPS SoC implementation.
+
+ config AR7_TYPE_TI
+ bool "Texas Instruments AR7"
+ select AR7_TI
+
+ config AR7_TYPE_AC49X
+ bool "AudioCodes AC49X"
+ select AR7_AC49X
+
+endchoice
+
+endif

@ -1,20 +0,0 @@
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -70,6 +70,7 @@ struct psbl_rec {
};
static const char psp_env_version[] __initconst = "TIENV0.8";
+static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2";
struct psp_env_chunk {
u8 num;
@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e
struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
- if (strcmp(psp_env, psp_env_version) == 0) {
+ if (strcmp(psp_env, psp_env_version) == 0 ||
+ strcmp(psp_env, psp_env_version_ac49x) == 0) {
parse_psp_env(psp_env);
} else {
for (i = 0; i < MAX_ENTRY; i++, env++)

@ -1,35 +0,0 @@
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -169,6 +169,11 @@ config MTD_OF_PARTS
the partition map from the children of the flash node,
as described in Documentation/devicetree/booting-without-of.txt.
+config MTD_AC49X_PARTS
+ tristate "AudioCodes AC49X partitioning support"
+ ---help---
+ AudioCodes AC49X partitioning support
+
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"
---help---
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -15,6 +15,7 @@ mtd-$(CONFIG_MTD_SPLIT_LZMA_FW) += mtdsp
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+obj-$(CONFIG_MTD_AC49X_PARTS) += ac49xpart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -202,7 +202,7 @@ static struct resource physmap_flash_res
.end = 0x11ffffff,
};
-static const char *ar7_probe_types[] = { "ar7part", NULL };
+static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL };
static struct physmap_flash_data physmap_flash_data = {
.width = 2,

@ -1,28 +0,0 @@
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -323,6 +323,13 @@ static const struct serial8250_config ua
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
+ [PORT_AR7] = {
+ .name = "TI-AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
/* Uart divisor latch read */
@@ -2861,7 +2868,11 @@ static void serial8250_console_putchar(s
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
+#ifdef CONFIG_AR7
+ wait_for_xmitr(up, BOTH_EMPTY);
+#else
wait_for_xmitr(up, UART_LSR_THRE);
+#endif
serial_port_out(port, UART_TX, ch);
}

@ -1,118 +0,0 @@
--- a/drivers/mtd/ar7part.c
+++ b/drivers/mtd/ar7part.c
@@ -30,11 +30,14 @@
#include <uapi/linux/magic.h>
+#include <asm/mach-ar7/prom.h>
+
#define AR7_PARTS 4
#define ROOT_OFFSET 0xe0000
#define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
#define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
+#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c)
struct ar7_bin_rec {
unsigned int checksum;
@@ -42,12 +45,16 @@ struct ar7_bin_rec {
unsigned int address;
};
+int create_titan_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data);
+
static int create_mtd_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
struct ar7_bin_rec header;
- unsigned int offset;
+ unsigned int offset, mtd_start, mtd_end;
size_t len;
unsigned int pre_size = master->erasesize, post_size = 0;
unsigned int root_offset = ROOT_OFFSET;
@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct
int retries = 10;
struct mtd_partition *ar7_parts;
+ const char *prom_str = prom_getenv("ProductID");
+ char mtd_name[] = "mtd1";
+ if(prom_str &&
+ (strcmp(prom_str, "CYWL")==0 ||
+ strcmp(prom_str, "CYWM")==0 ||
+ strcmp(prom_str, "CYLM")==0 ||
+ strcmp(prom_str, "CYLL")==0)){
+ return create_titan_partitions(master, pparts, data);
+ }
+
ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
if (!ar7_parts)
return -ENOMEM;
@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct
pre_size = offset;
- if (!ar7_parts[1].offset) {
- ar7_parts[1].offset = master->size - master->erasesize;
- post_size = master->erasesize;
- }
-
switch (header.checksum) {
- case LOADER_MAGIC1:
- while (header.length) {
- offset += sizeof(header) + header.length;
- mtd_read(master, offset, sizeof(header), &len,
- (uint8_t *)&header);
- }
- root_offset = offset + sizeof(header) + 4;
- break;
case LOADER_MAGIC2:
+ for (retries = 0; retries <= 9; retries++) {
+ mtd_name[3] = '0' + retries;
+ prom_str = prom_getenv(mtd_name);
+ if (prom_str == NULL)
+ continue;
+ sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end);
+ if (pre_size == (mtd_start & 0x1ffffff)) {
+ ar7_parts[1].offset = mtd_end &= 0x1ffffff;
+ ar7_parts[1].size = post_size = master->size - mtd_end;
+ break;
+ }
+ }
+ case LOADER_MAGIC1:
+ root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0;
while (header.length) {
offset += sizeof(header) + header.length;
mtd_read(master, offset, sizeof(header), &len,
(uint8_t *)&header);
}
- root_offset = offset + sizeof(header) + 4 + 0xff;
- root_offset &= ~(uint32_t)0xff;
+ root_offset += offset + sizeof(header);
break;
default:
printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum);
break;
}
+ if (!ar7_parts[1].offset) {
+ post_size = master->erasesize;
+ ar7_parts[1].offset = master->size - post_size;
+ }
+
mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header);
if (header.checksum != SQUASHFS_MAGIC) {
root_offset += master->erasesize - 1;
--- a/drivers/mtd/titanpart.c
+++ b/drivers/mtd/titanpart.c
@@ -149,7 +149,7 @@ static void titan_add_partition(char * e
}
int create_titan_partitions(struct mtd_info *master,
struct mtd_partition **pparts,
- unsigned long origin)
+ struct mtd_part_parser_data *data)
{
struct nsp_img_hdr_head hdr;
struct nsp_img_hdr_section_info sect_info;

@ -1,95 +0,0 @@
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -465,31 +465,22 @@ static struct gpio_led fb_fon_leds[] = {
},
};
-static struct gpio_led gt701_leds[] = {
+static struct gpio_led actiontec_leds[] = {
{
.name = "inet:green",
.gpio = 13,
- .active_low = 1,
- },
- {
- .name = "usb",
- .gpio = 12,
- .active_low = 1,
},
{
.name = "inet:red",
.gpio = 9,
- .active_low = 1,
},
{
- .name = "power:red",
+ .name = "power:green",
.gpio = 7,
- .active_low = 1,
},
{
- .name = "power:green",
+ .name = "power:red",
.gpio = 8,
- .active_low = 1,
.default_trigger = "default-on",
},
{
@@ -497,6 +488,44 @@ static struct gpio_led gt701_leds[] = {
.gpio = 10,
.active_low = 1,
},
+ {
+ .name = "wifi",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "wifi:red",
+ .gpio = 3,
+ },
+ {
+ .name = "standby",
+ .gpio = 4,
+ },
+ {
+ .name = "wps",
+ .gpio = 16,
+ .active_low = 1,
+ },
+ {
+ .name = "usb",
+ .gpio = 12,
+ .active_low = 1,
+ },
+ {
+ .name = "voip",
+ .gpio = 15,
+ .active_low = 1,
+ },
+ {
+ .name = "line1",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ {
+ .name = "line2",
+ .gpio = 25,
+ .active_low = 1,
+ },
};
static struct gpio_led_platform_data ar7_led_data;
@@ -540,9 +569,9 @@ static void __init detect_leds(void)
} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
ar7_led_data.leds = titan_leds;
- } else if (strstr(prid, "GT701")) {
- ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
- ar7_led_data.leds = gt701_leds;
+ } else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds);
+ ar7_led_data.leds = actiontec_leds;
}
}

@ -1,52 +0,0 @@
--- a/drivers/net/ethernet/ti/cpmac.c
+++ b/drivers/net/ethernet/ti/cpmac.c
@@ -1154,6 +1154,8 @@ static int cpmac_probe(struct platform_d
goto fail;
}
+ ar7_device_reset(pdata->reset_bit);
+
dev->irq = platform_get_irq_byname(pdev, "irq");
dev->netdev_ops = &cpmac_netdev_ops;
@@ -1232,7 +1234,7 @@ int cpmac_init(void)
cpmac_mii->reset = cpmac_mdio_reset;
cpmac_mii->irq = mii_irqs;
- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
+ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
if (!cpmac_mii->priv) {
printk(KERN_ERR "Can't ioremap mdio registers\n");
@@ -1243,10 +1245,16 @@ int cpmac_init(void)
#warning FIXME: unhardcode gpio&reset bits
ar7_gpio_disable(26);
ar7_gpio_disable(27);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
+
+ if (!ar7_is_titan()) {
+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
+ }
ar7_device_reset(AR7_RESET_BIT_EPHY);
+ if (ar7_is_titan())
+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
+
cpmac_mii->reset(cpmac_mii);
for (i = 0; i < 300; i++) {
@@ -1263,7 +1271,11 @@ int cpmac_init(void)
mask = 0;
}
- cpmac_mii->phy_mask = ~(mask | 0x80000000);
+ if (ar7_is_titan())
+ cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000);
+ else
+ cpmac_mii->phy_mask = ~(mask | 0x80000000);
+
snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1");
res = mdiobus_register(cpmac_mii);
Loading…
Cancel
Save