add support for D-Link DVA-G3810BN/TL

This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

SVN-Revision: 26956
master
Florian Fainelli 14 years ago
parent f9f8dcfa70
commit 3e83f60a66
  1. 29
      target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
  2. 4
      target/linux/brcm63xx/base-files/etc/init.d/defconfig
  3. 2
      target/linux/brcm63xx/image/Makefile

@ -0,0 +1,29 @@
# Copyright (C) 2008 OpenWrt.org
config interface loopback
option ifname lo
option proto static
option ipaddr 127.0.0.1
option netmask 255.0.0.0
config interface lan
option type bridge
option ifname eth1.1
option proto static
option ipaddr 192.168.1.1
option netmask 255.255.255.0
option nat 1
config interface wan
option ifname eth0
option proto dhcp
config switch eth1
option enable 1
option enable_vlan 1
option reset 1
config switch_vlan
option vlan 1
option device eth1
option ports "0 1 2 3 5t"

@ -8,6 +8,10 @@ START=05
start() {
local board=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo)
if [ "$board" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then
board="DVAG3810BN"
fi
[ ! -d /etc/defconfig/$board ] && board="generic"
for f in $( ls /etc/defconfig/$board ); do

@ -195,6 +195,8 @@ define Image/Build
$(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
# D-Link DSL-2740B/DSL-2741B, rev C3
$(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
# D-Link DVA-G3810BN/TL
$(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)

Loading…
Cancel
Save