apm821xx: remove kernel 4.9 support

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
master
Christian Lamparter 7 years ago committed by Mathias Kresin
parent e97f92bbf9
commit 3c94691620
  1. 326
      target/linux/apm821xx/config-4.9
  2. 32
      target/linux/apm821xx/patches-4.9/200-add-meraki-mr24-ikarem-support.patch
  3. 30
      target/linux/apm821xx/patches-4.9/201-add-amcc-apollo3g-support.patch
  4. 32
      target/linux/apm821xx/patches-4.9/202-add-netgear-wndr4700-support.patch
  5. 32
      target/linux/apm821xx/patches-4.9/203-add-meraki-mx60-buckminster-support.patch
  6. 51
      target/linux/apm821xx/patches-4.9/300-fix-atheros-nics-on-apm82181.patch
  7. 14
      target/linux/apm821xx/patches-4.9/301-fix-memory-map-wndr4700.patch
  8. 51
      target/linux/apm821xx/patches-4.9/701-powerpc_ibm_apm82181_phyclk_fix.patch
  9. 328
      target/linux/apm821xx/patches-4.9/702-powerpc_ibm_phy_add_dt_parser.patch
  10. 112
      target/linux/apm821xx/patches-4.9/703-net-emac-fix-reset-timeout-with-AR8035-phy.patch
  11. 545
      target/linux/apm821xx/patches-4.9/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
  12. 54
      target/linux/apm821xx/patches-4.9/802-usb-xhci-force-msi-renesas-xhci.patch
  13. 48
      target/linux/apm821xx/patches-4.9/804-usb-dwc2-add-amcc-usb-otg-405ex.patch
  14. 1027
      target/linux/apm821xx/patches-4.9/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch

@ -1,326 +0,0 @@
# CONFIG_40x is not set
CONFIG_44x=y
CONFIG_460EX=y
CONFIG_4xx=y
CONFIG_4xx_SOC=y
# CONFIG_ADVANCED_OPTIONS is not set
CONFIG_APM821xx=y
CONFIG_APOLLO3G=y
# CONFIG_ARCHES is not set
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
# CONFIG_ARCH_RANDOM is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AUDIT_ARCH=y
# CONFIG_BAMBOO is not set
CONFIG_BCH=y
CONFIG_BLK_MQ_PCI=y
# CONFIG_BLUESTONE is not set
CONFIG_BOOKE=y
CONFIG_BOOKE_WDT=y
# CONFIG_BOUNCE is not set
CONFIG_BUCKMINSTER=y
# CONFIG_CANYONLANDS is not set
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
CONFIG_CMDLINE_BOOL=y
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DEV_PPC4XX=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MD5_PPC=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_SHA1_PPC=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DECOMPRESS_GZIP=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_DTC=y
# CONFIG_E200 is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EBONY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EIGER is not set
# CONFIG_EPAPR_BOOT is not set
CONFIG_EXTRA_TARGETS="uImage"
CONFIG_FIXED_PHY=y
CONFIG_FREEZER=y
# CONFIG_FSL_LBC is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
# CONFIG_GENERIC_CSUM is not set
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_NVRAM=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
# CONFIG_GEN_RTC is not set
# CONFIG_GE_FPGA is not set
# CONFIG_GLACIER is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_SYSFS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_GENERIC_RCU_GUP=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PPC4XX=y
CONFIG_HZ=1000
# CONFIG_HZ_100 is not set
CONFIG_HZ_1000=y
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IBM_IIC=y
CONFIG_IBM_EMAC=y
CONFIG_IBM_EMAC_EMAC4=y
CONFIG_IBM_EMAC_POLL_WEIGHT=32
CONFIG_IBM_EMAC_RGMII=y
CONFIG_IBM_EMAC_RXB=128
CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
CONFIG_IBM_EMAC_TAH=y
CONFIG_IBM_EMAC_TXB=128
# CONFIG_ICON is not set
CONFIG_IKAREM=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IPIC is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_ISA_DMA_API=y
# CONFIG_JFFS2_FS is not set
# CONFIG_KATMAI is not set
CONFIG_KERNEL_GZIP=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LIBFDT=y
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MODULES_USE_ELF_RELA=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_U3_HT_IRQS is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_NDFC=y
# CONFIG_MTD_SPLIT is not set
# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
CONFIG_NEED_DMA_MAP_STATE=y
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_SG_DMA_LENGTH=y
# CONFIG_NONSTATIC_KERNEL is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_NO_BOOTMEM=y
CONFIG_NR_IRQS=512
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_PME=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MSI_IRQ_DOMAIN is not set
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYSICAL_START=0x00000000
CONFIG_PHYS_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_PM=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_PPC44x_SIMPLE=y
CONFIG_PPC4xx_CPM=y
CONFIG_PPC4xx_GPIO=y
# CONFIG_PPC4xx_HSTA_MSI is not set
CONFIG_PPC4xx_MSI=y
CONFIG_PPC4xx_OCM=y
CONFIG_PPC4xx_PCI_EXPRESS=y
# CONFIG_PPC64 is not set
# CONFIG_PPC_47x is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
CONFIG_PPC_ADV_DEBUG_DVCS=2
CONFIG_PPC_ADV_DEBUG_IACS=4
CONFIG_PPC_ADV_DEBUG_REGS=y
# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_COPRO_BASE is not set
CONFIG_PPC_DCR=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DOORBELL is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_EPAPR_HV_PIC is not set
CONFIG_PPC_FPU=y
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_ICP_HV is not set
# CONFIG_PPC_ICP_NATIVE is not set
# CONFIG_PPC_ICS_RTAS is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PPC_LIB_RHEAP=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_P7_NAP is not set
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PPC_RTAS is not set
CONFIG_PPC_UDBG_16550=y
CONFIG_PPC_WERROR=y
# CONFIG_PPC_XICS is not set
# CONFIG_PQ2ADS is not set
CONFIG_PTE_64BIT=y
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_RAINIER is not set
CONFIG_RAS=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RD_GZIP=y
# CONFIG_RELOCATABLE is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SAM440EP is not set
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SEQUOIA is not set
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SIMPLE_GPIO=y
CONFIG_SPARSE_IRQ=y
CONFIG_SRCU=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SWIOTLB is not set
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
# CONFIG_TAISHAN is not set
CONFIG_TASK_SIZE=0xc0000000
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_USB_SUPPORT=y
CONFIG_VDSO32=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_WARP is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_WNDR4700=y
# CONFIG_XILINX_SYSACE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_YOSEMITE is not set
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

@ -1,32 +0,0 @@
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -40,6 +40,19 @@ config EBONY
help
This option enables support for the IBM PPC440GP evaluation board.
+config IKAREM
+ bool "Ikarem"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select APM821xx
+ select PCI_MSI
+ select PPC4xx_MSI
+ select PPC4xx_PCI_EXPRESS
+ select IBM_EMAC_RGMII
+ help
+ This option enables support for the Cisco Meraki MR24 (Ikarem) Access Point.
+
config SAM440EP
bool "Sam440ep"
depends on 44x
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -62,6 +62,7 @@ static char *board[] __initdata = {
"amcc,sequoia",
"amcc,taishan",
"amcc,yosemite",
+ "meraki,ikarem",
"mosaixtech,icon"
};

@ -1,30 +0,0 @@
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -143,6 +143,17 @@ config CANYONLANDS
help
This option enables support for the AMCC PPC460EX evaluation board.
+config APOLLO3G
+ bool "Apollo3G"
+ depends on 44x
+ default n
+ select PPC44x_SIMPLE
+ select APM821xx
+ select IBM_EMAC_RGMII
+ select 460EX
+ help
+ This option enables support for the AMCC Apollo 3G board.
+
config GLACIER
bool "Glacier"
depends on 44x
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
* board.c file for it rather than adding it to this list.
*/
static char *board[] __initdata = {
+ "amcc,apollo3g",
"amcc,arches",
"amcc,bamboo",
"apm,bluestone",

@ -1,32 +0,0 @@
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -3,6 +3,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
obj-$(CONFIG_44x) += idle.o
endif
obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
+obj-$(CONFIG_WNDR4700) += wndr4700.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -260,6 +260,19 @@ config ICON
help
This option enables support for the AMCC PPC440SPe evaluation board.
+config WNDR4700
+ bool "WNDR4700"
+ depends on 44x
+ default n
+ select APM821xx
+ select PCI_MSI
+ select PPC4xx_MSI
+ select PPC4xx_PCI_EXPRESS
+ select IBM_EMAC_RGMII
+ select 460EX
+ help
+ This option enables support for the Netgear WNDR4700/WNDR4720 board.
+
config XILINX_VIRTEX440_GENERIC_BOARD
bool "Generic Xilinx Virtex 5 FXT board support"
depends on 44x

@ -1,32 +0,0 @@
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -30,6 +30,19 @@ config BLUESTONE
help
This option enables support for the APM APM821xx Evaluation board.
+config BUCKMINSTER
+ bool "Buckminster"
+ depends on 44x
+ default n
+ select APM821xx
+ select PCI_MSI
+ select PPC4xx_MSI
+ select PPC4xx_PCI_EXPRESS
+ select IBM_EMAC_RGMII
+ select 460EX
+ help
+ This option enables support for the Cisco Meraki MX60/MX60W (Buckminster) Security Appliance
+
config EBONY
bool "Ebony"
depends on 44x
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -63,6 +63,7 @@ static char *board[] __initdata = {
"amcc,sequoia",
"amcc,taishan",
"amcc,yosemite",
+ "meraki,buckminster",
"meraki,ikarem",
"mosaixtech,icon"
};

@ -1,51 +0,0 @@
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1066,15 +1066,24 @@ static int __init apm821xx_pciex_init_po
u32 val;
/*
- * Do a software reset on PCIe ports.
- * This code is to fix the issue that pci drivers doesn't re-assign
- * bus number for PCIE devices after Uboot
- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
- * PT quad port, SAS LSI 1064E)
+ * Only reset the PHY when no link is currently established.
+ * This is for the Atheros PCIe board which has problems to establish
+ * the link (again) after this PHY reset. All other currently tested
+ * PCIe boards don't show this problem.
*/
-
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
- mdelay(10);
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000)) {
+ /*
+ * Do a software reset on PCIe ports.
+ * This code is to fix the issue that pci drivers doesn't re-assign
+ * bus number for PCIE devices after Uboot
+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
+ * PT quad port, SAS LSI 1064E)
+ */
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
+ mdelay(10);
+ }
if (port->endpoint)
val = PTYPE_LEGACY_ENDPOINT << 20;
@@ -1091,9 +1100,12 @@ static int __init apm821xx_pciex_init_po
mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
- mdelay(50);
- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ if (!(val & 0x00001000)) {
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
+ mdelay(50);
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
+ }
mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |

@ -1,14 +0,0 @@
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1913,9 +1913,9 @@ static void __init ppc4xx_configure_pcie
* if it works
*/
out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
out_le32(mbase + PECFG_PIM01SAL, 0x00000000);

@ -1,51 +0,0 @@
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -129,6 +129,7 @@ static inline void emac_report_timeout_e
{
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
EMAC_FTR_460EX_PHY_CLK_FIX |
+ EMAC_FTR_APM821XX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX))
DBG(dev, "%s" NL, error);
else if (net_ratelimit())
@@ -146,6 +147,10 @@ static inline void emac_rx_clk_tx(struct
if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR,
0, SDR0_MFR_ECS >> dev->cell_index);
+
+ if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_ETH_CFG,
+ 0, 0x00000100 >> dev->cell_index);
#endif
}
@@ -155,6 +160,10 @@ static inline void emac_rx_clk_default(s
if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR,
SDR0_MFR_ECS >> dev->cell_index, 0);
+
+ if (emac_has_feature(dev, EMAC_FTR_APM821XX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_ETH_CFG,
+ 0x00000100 >> dev->cell_index, 0);
#endif
}
@@ -2617,6 +2626,7 @@ static int emac_init_config(struct emac_
if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
+ EMAC_FTR_APM821XX_PHY_CLK_FIX |
EMAC_FTR_460EX_PHY_CLK_FIX);
}
} else if (of_device_is_compatible(np, "ibm,emac4")) {
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -333,6 +333,8 @@ struct emac_instance {
*/
#define EMAC_FTR_APM821XX_NO_HALF_DUPLEX 0x00001000
+#define EMAC_FTR_APM821XX_PHY_CLK_FIX 0x000002000
+
/* Right now, we don't quite handle the always/possible masks on the
* most optimal way as we don't have a way to say something like
* always EMAC4. Patches welcome.

@ -1,328 +0,0 @@
From b1c54da602ae9215cfbde1c3ed3b6296b76f07fc Mon Sep 17 00:00:00 2001
Message-Id: <b1c54da602ae9215cfbde1c3ed3b6296b76f07fc.1486337989.git.chunkeey@googlemail.com>
In-Reply-To: <246bd6614529d28dc48b11981ab5dae7a7364fc2.1486337989.git.chunkeey@googlemail.com>
References: <246bd6614529d28dc48b11981ab5dae7a7364fc2.1486337989.git.chunkeey@googlemail.com>
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 13 Jun 2016 15:42:21 +0200
Subject: [RFC 2/2] net: emac: add support for device-tree based PHY discovery
and setup
To: netdev@vger.kernel.org,
devicetree@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>,
Ivan Mikhaylov <ivan@de.ibm.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>
This patch adds glue-code that allows the EMAC driver to interface
with the existing dt-supported PHYs in drivers/net/phy.
Because currently, the emac driver maintains a small library of
supported phys for in a private phy.c file located in the drivers
directory.
The support is limited to mostly single ethernet transceiver like the:
CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035.
However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W)
have a 5-port switch (QCA8327N) attached to the MDIO of the EMAC.
The switch chip has already a proper phy-driver (ar8216) that uses
the generic phy library.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -42,6 +42,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_net.h>
+#include <linux/of_mdio.h>
#include <linux/slab.h>
#include <asm/processor.h>
@@ -2422,6 +2423,229 @@ static int emac_read_uint_prop(struct de
return 0;
}
+static void emac_adjust_link(struct net_device *ndev)
+{
+ struct emac_instance *dev = netdev_priv(ndev);
+ struct phy_device *phy = dev->phy_dev;
+
+ dev->phy.autoneg = phy->autoneg;
+ dev->phy.speed = phy->speed;
+ dev->phy.duplex = phy->duplex;
+ dev->phy.pause = phy->pause;
+ dev->phy.asym_pause = phy->asym_pause;
+ dev->phy.advertising = phy->advertising;
+}
+
+static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
+{
+ return emac_mdio_read(bus->priv, addr, regnum);
+}
+
+static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum, u16 val)
+{
+ emac_mdio_write(bus->priv, addr, regnum, val);
+ return 0;
+}
+
+static int emac_mii_bus_reset(struct mii_bus *bus)
+{
+ struct emac_instance *dev = netdev_priv(bus->priv);
+ int err;
+
+ err = emac_reset(dev);
+ if (err)
+ return err;
+ /* Meraki MX60(W)'s uboot will disable the switch and
+ * a bus reset won't do anything. */
+ emac_mii_reset_phy(&dev->phy);
+ return 0;
+}
+
+static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+
+ dev->phy.autoneg = AUTONEG_ENABLE;
+ dev->phy.speed = SPEED_1000;
+ dev->phy.duplex = DUPLEX_FULL;
+ dev->phy.advertising = advertise;
+ phy->autoneg = AUTONEG_ENABLE;
+ phy->speed = dev->phy.speed;
+ phy->duplex = dev->phy.duplex;
+ phy->advertising = advertise;
+ return phy_start_aneg(dev->phy_dev);
+}
+
+static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+
+ dev->phy.autoneg = AUTONEG_DISABLE;
+ dev->phy.speed = speed;
+ dev->phy.duplex = fd;
+ phy->autoneg = AUTONEG_DISABLE;
+ phy->speed = speed;
+ phy->duplex = fd;
+ return phy_start_aneg(dev->phy_dev);
+}
+
+static int emac_mdio_poll_link(struct mii_phy *phy)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+ int res;
+
+ res = phy_read_status(dev->phy_dev);
+ if (res) {
+ dev_err(&dev->ofdev->dev, "link update failed (%d).", res);
+ return ethtool_op_get_link(ndev);
+ }
+
+ return dev->phy_dev->link;
+}
+
+static int emac_mdio_read_link(struct mii_phy *phy)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+ int res;
+
+ res = phy_read_status(dev->phy_dev);
+ if (res)
+ return res;
+
+ dev->phy.speed = phy->speed;
+ dev->phy.duplex = phy->duplex;
+ dev->phy.pause = phy->pause;
+ dev->phy.asym_pause = phy->asym_pause;
+ return 0;
+}
+
+static int emac_mdio_init_phy(struct mii_phy *phy)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+
+ phy_start(dev->phy_dev);
+ dev->phy.autoneg = phy->autoneg;
+ dev->phy.speed = phy->speed;
+ dev->phy.duplex = phy->duplex;
+ dev->phy.advertising = phy->advertising;
+ dev->phy.pause = phy->pause;
+ dev->phy.asym_pause = phy->asym_pause;
+
+ return phy_init_hw(dev->phy_dev);
+}
+
+static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
+ .init = emac_mdio_init_phy,
+ .setup_aneg = emac_mdio_setup_aneg,
+ .setup_forced = emac_mdio_setup_forced,
+ .poll_link = emac_mdio_poll_link,
+ .read_link = emac_mdio_read_link,
+};
+
+static int emac_dt_mdio_probe(struct emac_instance *dev)
+{
+ struct device_node *mii_np;
+ int res;
+
+ mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
+ if (!mii_np) {
+ dev_err(&dev->ofdev->dev, "no mdio definition found.");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(mii_np)) {
+ res = 1;
+ goto put_node;
+ }
+
+ dev->mii_bus = devm_mdiobus_alloc(&dev->ofdev->dev);
+ if (!dev->mii_bus) {
+ res = -ENOMEM;
+ goto put_node;
+ }
+
+ dev->mii_bus->priv = dev->ndev;
+ dev->mii_bus->parent = dev->ndev->dev.parent;
+ dev->mii_bus->name = "emac_mdio";
+ dev->mii_bus->read = &emac_mii_bus_read;
+ dev->mii_bus->write = &emac_mii_bus_write;
+ dev->mii_bus->reset = &emac_mii_bus_reset;
+ snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->ofdev->name);
+ res = of_mdiobus_register(dev->mii_bus, mii_np);
+ if (res) {
+ dev_err(&dev->ofdev->dev, "cannot register MDIO bus %s (%d)",
+ dev->mii_bus->name, res);
+ }
+
+ put_node:
+ of_node_put(mii_np);
+ return res;
+}
+
+static int emac_dt_phy_probe(struct emac_instance *dev,
+ struct device_node *phy_handle)
+{
+ u32 phy_flags = 0;
+ int res;
+
+ res = of_property_read_u32(phy_handle, "phy-flags", &phy_flags);
+ if (res < 0 && res != -EINVAL)
+ return res;
+
+ dev->phy.def = devm_kzalloc(&dev->ofdev->dev, sizeof(*dev->phy.def),
+ GFP_KERNEL);
+ if (!dev->phy.def)
+ return -ENOMEM;
+
+ dev->phy_dev = of_phy_connect(dev->ndev, phy_handle,
+ &emac_adjust_link, phy_flags,
+ PHY_INTERFACE_MODE_RGMII);
+ if (!dev->phy_dev) {
+ dev_err(&dev->ofdev->dev, "failed to connect to PHY.\n");
+ return -ENODEV;
+ }
+
+ dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
+ dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
+ dev->phy.def->name = dev->phy_dev->drv->name;
+ dev->phy.def->ops = &emac_dt_mdio_phy_ops;
+ dev->phy.features = dev->phy_dev->supported;
+ dev->phy.address = dev->phy_dev->mdio.addr;
+ dev->phy.mode = dev->phy_dev->interface;
+ return 0;
+}
+
+static int emac_probe_dt_phy(struct emac_instance *dev)
+{
+ struct device_node *np = dev->ofdev->dev.of_node;
+ struct device_node *phy_handle;
+ int res = 0;
+
+ phy_handle = of_parse_phandle(np, "phy-handle", 0);
+
+ if (phy_handle) {
+ res = emac_dt_mdio_probe(dev);
+ if (!res) {
+ res = emac_dt_phy_probe(dev, phy_handle);
+ if (!res)
+ res = 1;
+ else
+ mdiobus_unregister(dev->mii_bus);
+ }
+ }
+
+ of_node_put(phy_handle);
+ /* if no phy device was specified in the device tree, then we fallback
+ * to the old emac_phy.c probe code for compatibility reasons.
+ */
+ return res;
+}
+
static int emac_init_phy(struct emac_instance *dev)
{
struct device_node *np = dev->ofdev->dev.of_node;
@@ -2492,6 +2716,22 @@ static int emac_init_phy(struct emac_ins
emac_configure(dev);
+ if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
+ int res = emac_probe_dt_phy(dev);
+
+ if (res == 1) {
+ mutex_unlock(&emac_phy_map_lock);
+ goto init_phy;
+ } else if (res < 0) {
+ mutex_unlock(&emac_phy_map_lock);
+ dev_err(&dev->ofdev->dev, "failed to attach dt phy (%d).\n",
+ res);
+ return res;
+ }
+
+ /* continue with old code */
+ }
+
if (dev->phy_address != 0xffffffff)
phy_map = ~(1 << dev->phy_address);
@@ -2519,6 +2759,7 @@ static int emac_init_phy(struct emac_ins
return -ENXIO;
}
+ init_phy:
/* Init PHY */
if (dev->phy.def->ops->init)
dev->phy.def->ops->init(&dev->phy);
@@ -2988,6 +3229,12 @@ static int emac_remove(struct platform_d
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
zmii_detach(dev->zmii_dev, dev->zmii_port);
+ if (dev->phy_dev)
+ phy_disconnect(dev->phy_dev);
+
+ if (dev->mii_bus)
+ mdiobus_unregister(dev->mii_bus);
+
busy_phy_map &= ~(1 << dev->phy.address);
DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -199,6 +199,10 @@ struct emac_instance {
struct emac_instance *mdio_instance;
struct mutex mdio_lock;
+ /* Device-tree based phy configuration */
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+
/* ZMII infos if any */
u32 zmii_ph;
u32 zmii_port;

@ -1,112 +0,0 @@
From b2e79053e7456a961249c8865214a1e95b49c863 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Sat, 3 Jun 2017 18:16:19 +0200
Subject: [PATCH] net: emac: fix reset timeout with AR8035 phy
This patch fixes a problem where the AR8035 PHY can't be
detected on an Cisco Meraki MR24, if the ethernet cable is
not connected on boot.
Russell Senior provided steps to reproduce the issue:
|Disconnect ethernet cable, apply power, wait until device has booted,
|plug in ethernet, check for interfaces, no eth0 is listed.
|
|This appears to be a problem during probing of the AR8035 Phy chip.
|When ethernet has no link, the phy detection fails, and eth0 is not
|created. Plugging ethernet later has no effect, because there is no
|interface as far as the kernel is concerned. The relevant part of
|the boot log looks like this:
|this is the failing case:
|
|[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout
|[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY!
|and the succeeding case:
|
|[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
|[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:..
|[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01)
Based on the comment and the commit message of
commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT").
This is because the AR8035 PHY doesn't provide the TX Clock,
if the ethernet cable is not attached. This causes the reset
to timeout and the PHY detection code in emac_init_phy() is
unable to detect the AR8035 PHY. As a result, the emac driver
bails out early and the user left with no ethernet.
In order to stay compatible with existing configurations, the driver
tries the current reset approach at first. Only if the first attempt
timed out, it does perform one more retry with the clock input
temporarily switched to the internal clock source for just the
duration of the reset.
LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687>
Cc: Chris Blake <chrisrblake93@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -352,6 +352,7 @@ static int emac_reset(struct emac_instan
{
struct emac_regs __iomem *p = dev->emacp;
int n = 20;
+ bool __maybe_unused try_internal_clock = false;
DBG(dev, "reset" NL);
@@ -364,6 +365,7 @@ static int emac_reset(struct emac_instan
}
#ifdef CONFIG_PPC_DCR_NATIVE
+do_retry:
/*
* PPC460EX/GT Embedded Processor Advanced User's Manual
* section 28.10.1 Mode Register 0 (EMACx_MR0) states:
@@ -371,10 +373,19 @@ static int emac_reset(struct emac_instan
* of the EMAC. If none is present, select the internal clock
* (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
* After a soft reset, select the external clock.
+ *
+ * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the
+ * ethernet cable is not attached. This causes the reset to timeout
+ * and the PHY detection code in emac_init_phy() is unable to
+ * communicate and detect the AR8035-A PHY. As a result, the emac
+ * driver bails out early and the user has no ethernet.
+ * In order to stay compatible with existing configurations, the
+ * driver will temporarily switch to the internal clock, after
+ * the first reset fails.
*/
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
- if (dev->phy_address == 0xffffffff &&
- dev->phy_map == 0xffffffff) {
+ if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+ dev->phy_map == 0xffffffff)) {
/* No PHY: select internal loop clock before reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
0, SDR0_ETH_CFG_ECS << dev->cell_index);
@@ -392,8 +403,15 @@ static int emac_reset(struct emac_instan
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
- if (dev->phy_address == 0xffffffff &&
- dev->phy_map == 0xffffffff) {
+ if (!n && !try_internal_clock) {
+ /* first attempt has timed out. */
+ n = 20;
+ try_internal_clock = true;
+ goto do_retry;
+ }
+
+ if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+ dev->phy_map == 0xffffffff)) {
/* No PHY: restore external clock source after reset */
dcri_clrset(SDR0, SDR0_ETH_CFG,
SDR0_ETH_CFG_ECS << dev->cell_index, 0);

@ -1,545 +0,0 @@
From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Thu, 2 Jun 2016 00:48:46 +0200
Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
w/o ROM
This patch adds a firmware loader for the uPD720201K8-711-BAC-A
and uPD720202K8-711-BAA-A variant. Both of these chips are listed
in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
devices which need the firmware loader on page 2 in order to
work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter
"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to
PCIe Adapter (PP2U-E card) "Firmware download" archive. An
alternative version can be sourced from Netgear's WNDR4700 GPL
archives.
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
(2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
If someone from Renesas is listening: It would be great, if these
firmwares could be added to linux-firmware.git.
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 492 insertions(+)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -24,6 +24,8 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/acpi.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
#include "xhci.h"
#include "xhci-trace.h"
@@ -239,6 +241,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
+static const struct renesas_fw_entry {
+ const char *firmware_name;
+ u16 device;
+ u8 revision;
+ u16 expected_version;
+} renesas_fw_table[] = {
+ /*
+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
+ * need the software loader.
+ *
+ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
+ *
+ * Note: This firmware is for the following devices.
+ * - uPD720201 ES 2.0 sample whose revision ID is 2.
+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+ */
+ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
+ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
+ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
+};
+
+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
+{
+ const struct renesas_fw_entry *entry;
+ size_t i;
+
+ /* This loader will only work with a RENESAS device. */
+ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
+ entry = &renesas_fw_table[i];
+ if (entry->device == dev->device &&
+ entry->revision == dev->revision)
+ return entry;
+ }
+
+ return NULL;
+}
+
+static int renesas_fw_download_image(struct pci_dev *dev,
+ const u32 *fw,
+ size_t step)
+{
+ size_t i;
+ int err;
+ u8 fw_status;
+ bool data0_or_data1;
+
+ /*
+ * The hardware does alternate between two 32-bit pages.
+ * (This is because each row of the firmware is 8 bytes).
+ *
+ * for even steps we use DATA0, for odd steps DATA1.
+ */
+ data0_or_data1 = (step & 1) == 1;
+
+ /* step+1. Read "Set DATAX" and confirm it is cleared. */
+ for (i = 0; i < 10000; i++) {
+ err = pci_read_config_byte(dev, 0xF5, &fw_status);
+ if (err)
+ return pcibios_err_to_errno(err);
+ if (!(fw_status & BIT(data0_or_data1)))
+ break;
+
+ udelay(1);
+ }
+ if (i == 10000)
+ return -ETIMEDOUT;
+
+ /*
+ * step+2. Write FW data to "DATAX".
+ * "LSB is left" => force little endian
+ */
+ err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
+ (__force u32) cpu_to_le32(fw[step]));
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ udelay(100);
+
+ /* step+3. Set "Set DATAX". */
+ err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ return 0;
+}
+
+static int renesas_fw_verify(struct pci_dev *dev,
+ const void *fw_data,
+ size_t length)
+{
+ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
+ u16 fw_version_pointer;
+ u16 fw_version;
+
+ if (!entry)
+ return -EINVAL;
+
+ /*
+ * The Firmware's Data Format is describe in
+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
+ */
+
+ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
+ if (length % 8 != 0) {
+ dev_err(&dev->dev, "firmware size is not a multipe of 8.");
+ return -EINVAL;
+ }
+
+ /*
+ * The bootrom chips of the big brother have sizes up to 64k, let's
+ * assume that's the biggest the firmware can get.
+ */
+ if (length < 0x1000 || length >= 0x10000) {
+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
+ length);
+ return -EINVAL;
+ }
+
+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
+ if (get_unaligned_le16(fw_data) != 0x55aa) {
+ dev_err(&dev->dev, "no valid firmware header found.");
+ return -EINVAL;
+ }
+
+ /* verify the firmware version position and print it. */
+ fw_version_pointer = get_unaligned_le16(fw_data + 4);
+ if (fw_version_pointer + 2 >= length) {
+ dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
+ return -EINVAL;
+ }
+
+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
+
+ if (fw_version != entry->expected_version) {
+ dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
+ entry->expected_version);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int renesas_fw_check_running(struct pci_dev *pdev)
+{
+ int err;
+ u8 fw_state;
+
+ /*
+ * Test if the device is actually needing the firmware. As most
+ * BIOSes will initialize the device for us. If the device is
+ * initialized.
+ */
+ err = pci_read_config_byte(pdev, 0xF4, &fw_state);
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ /*
+ * Check if "FW Download Lock" is locked. If it is and the FW is
+ * ready we can simply continue. If the FW is not ready, we have
+ * to give up.
+ */
+ if (fw_state & BIT(1)) {
+ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
+
+ if (fw_state & BIT(4))
+ return 0;
+
+ dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
+ return -EIO;
+ }
+
+ /*
+ * Check if "FW Download Enable" is set. If someone (us?) tampered
+ * with it and it can't be resetted, we have to give up too... and
+ * ask for a forgiveness and a reboot.
+ */
+ if (fw_state & BIT(0)) {
+ dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
+ return -EIO;
+ }
+
+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
+ switch ((fw_state & 0x70)) {
+ case 0: /* No result yet */
+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
+
+ /* tell the caller, that this device needs the firmware. */
+ return 1;
+
+ case BIT(4): /* Success, device should be working. */
+ dev_dbg(&pdev->dev, "FW is ready.");
+ return 0;
+
+ case BIT(5): /* Error State */
+ dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
+ return -ENODEV;
+
+ default: /* All other states are marked as "Reserved states" */
+ dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
+ (fw_state & 0x70) >> 4);
+ return -EINVAL;
+ }
+}
+
+static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
+{
+#if 0
+ u32 val;
+
+ /*
+ * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
+ * 'RUN/STOP' of USBCMD Register is set"
+ */
+ val = readl(hcd->regs + 0x20);
+ if (val & BIT(0)) {
+ dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
+ return -EBUSY;
+ }
+#endif
+ return 0;
+}
+
+static int renesas_fw_download(struct pci_dev *pdev,
+ const struct firmware *fw, unsigned int retry_counter)
+{
+ const u32 *fw_data = (const u32 *) fw->data;
+ size_t i;
+ int err;
+ u8 fw_status;
+
+ /*
+ * For more information and the big picture: please look at the
+ * "Firmware Download Sequence" in "7.1 FW Download Interface"
+ * of R19UH0078EJ0500 Rev.5.00 page 131
+ */
+ err = renesas_hw_check_run_stop_busy(pdev);
+ if (err)
+ return err;
+
+ /*
+ * 0. Set "FW Download Enable" bit in the
+ * "FW Download Control & Status Register" at 0xF4
+ */
+ err = pci_write_config_byte(pdev, 0xF4, BIT(0));
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ /* 1 - 10 follow one step after the other. */
+ for (i = 0; i < fw->size / 4; i++) {
+ err = renesas_fw_download_image(pdev, fw_data, i);
+ if (err) {
+ dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
+ i, i * 4, err);
+ return err;
+ }
+ }
+
+ /*
+ * This sequence continues until the last data is written to
+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
+ * is cleared by the hardware beforehand.
+ */
+ for (i = 0; i < 10000; i++) {
+ err = pci_read_config_byte(pdev, 0xF5, &fw_status);
+ if (err)
+ return pcibios_err_to_errno(err);
+ if (!(fw_status & (BIT(0) | BIT(1))))
+ break;
+
+ udelay(1);
+ }
+ if (i == 10000)
+ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
+
+ /*
+ * 11. After finishing writing the last data of FW, the
+ * System Software must clear "FW Download Enable"
+ */
+ err = pci_write_config_byte(pdev, 0xF4, 0);
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ /* 12. Read "Result Code" and confirm it is good. */
+ for (i = 0; i < 10000; i++) {
+ err = pci_read_config_byte(pdev, 0xF4, &fw_status);
+ if (err)
+ return pcibios_err_to_errno(err);
+ if (fw_status & BIT(4))
+ break;
+
+ udelay(1);
+ }
+ if (i == 10000) {
+ /* Timed out / Error - let's see if we can fix this */
+ err = renesas_fw_check_running(pdev);
+ switch (err) {
+ case 0: /*
+ * we shouldn't end up here.
+ * maybe it took a little bit longer.
+ * But all should be well?
+ */
+ break;
+
+ case 1: /* (No result yet? - we can try to retry) */
+ if (retry_counter < 10) {
+ retry_counter++;
+ dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
+ retry_counter);
+ return renesas_fw_download(pdev, fw,
+ retry_counter);
+ }
+ return -ETIMEDOUT;
+
+ default:
+ return err;
+ }
+ }
+ /*
+ * Optional last step: Engage Firmware Lock
+ *
+ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
+ * if (err)
+ * return pcibios_err_to_errno(err);
+ */
+
+ return 0;
+}
+
+struct renesas_fw_ctx {
+ struct pci_dev *pdev;
+ const struct pci_device_id *id;
+ bool resume;
+};
+
+static int xhci_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+
+static void renesas_fw_callback(const struct firmware *fw,
+ void *context)
+{
+ struct renesas_fw_ctx *ctx = context;
+ struct pci_dev *pdev = ctx->pdev;
+ struct device *parent = pdev->dev.parent;
+ int err = -ENOENT;
+
+ if (fw) {
+ err = renesas_fw_verify(pdev, fw->data, fw->size);
+ if (!err) {
+ err = renesas_fw_download(pdev, fw, 0);
+ release_firmware(fw);
+ if (!err) {
+ if (ctx->resume)
+ return;
+
+ err = xhci_pci_probe(pdev, ctx->id);
+ if (!err) {
+ /* everything worked */
+ devm_kfree(&pdev->dev, ctx);
+ return;
+ }
+
+ /* in case of an error - fall through */
+ } else {
+ dev_err(&pdev->dev, "firmware failed to download (%d).",
+ err);
+ }
+ }
+ } else {
+ dev_err(&pdev->dev, "firmware failed to load (%d).", err);
+ }
+
+ dev_info(&pdev->dev, "Unloading driver");
+
+ if (parent)
+ device_lock(parent);
+
+ device_release_driver(&pdev->dev);
+
+ if (parent)
+ device_unlock(parent);
+
+ pci_dev_put(pdev);
+}
+
+static int renesas_fw_alive_check(struct pci_dev *pdev)
+{
+ const struct renesas_fw_entry *entry;
+ int err;
+
+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
+ entry = renesas_needs_fw_dl(pdev);
+ if (!entry)
+ return 0;
+
+ err = renesas_fw_check_running(pdev);
+ /* Also go ahead, if the firmware is running */
+ if (err == 0)
+ return 0;
+
+ /* At this point, we can be sure that the FW isn't ready. */
+ return err;
+}
+
+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
+ const struct pci_device_id *id,
+ bool do_resume)
+{
+ const struct renesas_fw_entry *entry;
+ struct renesas_fw_ctx *ctx;
+ int err;
+
+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
+ entry = renesas_needs_fw_dl(pdev);
+ if (!entry)
+ return 0;
+
+ err = renesas_fw_check_running(pdev);
+ /* Continue ahead, if the firmware is already running. */
+ if (err == 0)
+ return 0;
+
+ if (err != 1)
+ return err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+ ctx->pdev = pdev;
+ ctx->resume = do_resume;
+ ctx->id = id;
+
+ pci_dev_get(pdev);
+ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
+ &pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
+ if (err) {
+ pci_dev_put(pdev);
+ return err;
+ }
+
+ /*
+ * The renesas_fw_callback() callback will continue the probe
+ * process, once it aquires the firmware.
+ */
+ return 1;
+}
+
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -278,6 +732,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
+ /*
+ * Check if this device is a RENESAS uPD720201/2 device.
+ * Otherwise, we can continue with xhci_pci_probe as usual.
+ */
+ retval = renesas_fw_download_to_hw(dev, id, false);
+ switch (retval) {
+ case 0:
+ break;
+
+ case 1: /* let it load the firmware and recontinue the probe. */
+ return 0;
+
+ default:
+ return retval;
+ };
+
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
@@ -335,6 +805,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
+ if (renesas_fw_alive_check(dev)) {
+ /*
+ * bail out early, if this was a renesas device w/o FW.
+ * Else we might hit the NMI watchdog in xhci_handsake
+ * during xhci_reset as part of the driver's unloading.
+ * which we forced in the renesas_fw_callback().
+ */
+ return;
+ }
+
xhci = hcd_to_xhci(pci_get_drvdata(dev));
xhci->xhc_state |= XHCI_STATE_REMOVING;
if (xhci->shared_hcd) {

@ -1,54 +0,0 @@
From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Thu, 23 Jun 2016 20:28:20 +0200
Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
uPD720202
The APM82181 does not support MSI-X. When probed, it will
produce a noisy warning.
---
drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 362 insertions(+)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -196,7 +196,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015)
- xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci->quirks |= XHCI_RESET_ON_RESUME | XHCI_FORCE_MSI;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -390,10 +390,14 @@ static int xhci_try_enable_msi(struct us
free_irq(hcd->irq, hcd);
hcd->irq = 0;
- ret = xhci_setup_msix(xhci);
- if (ret)
- /* fall back to msi*/
+ if (xhci->quirks & XHCI_FORCE_MSI) {
ret = xhci_setup_msi(xhci);
+ } else {
+ ret = xhci_setup_msix(xhci);
+ if (ret)
+ /* fall back to msi*/
+ ret = xhci_setup_msi(xhci);
+ }
if (!ret)
/* hcd->irq is 0, we have MSI */
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1680,6 +1680,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
+#define XHCI_FORCE_MSI (1 << 24)
unsigned hw_lpm_support:1;
/* cached usb2 extened protocol capabilites */
u32 *ext_caps;

@ -1,48 +0,0 @@
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -279,6 +279,37 @@ static int dwc2_get_dr_mode(struct dwc2_
return 0;
}
+static const struct dwc2_core_params params_amcc_dwc_otg = {
+ .otg_cap = DWC2_CAP_PARAM_HNP_SRP_CAPABLE,
+ .otg_ver = -1,
+ .dma_enable = -1,
+ .dma_desc_enable = -1,
+ .speed = -1,
+ .enable_dynamic_fifo = -1,
+ .en_multiple_tx_fifo = -1,
+ .host_rx_fifo_size = -1,
+ .host_nperio_tx_fifo_size = -1,
+ .host_perio_tx_fifo_size = -1,
+ .max_transfer_size = -1,
+ .max_packet_count = -1,
+ .host_channels = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
+ .phy_ulpi_ddr = -1,
+ .phy_ulpi_ext_vbus = -1,
+ .i2c_enable = -1,
+ .ulpi_fs_ls = -1,
+ .host_support_fs_ls_low_power = -1,
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = -1,
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT,
+ .uframe_sched = -1,
+ .external_id_pin_ctl = -1,
+ .hibernation = -1,
+};
+
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -511,6 +542,7 @@ static void dwc2_driver_shutdown(struct
}
static const struct of_device_id dwc2_of_match_table[] = {
+ { .compatible = "amcc,usb-otg-405ex", .data = &params_amcc_dwc_otg },
{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
Loading…
Cancel
Save