Nicolas Thill
17 years ago
parent
c7437ec67c
commit
39127ef8bf
@ -1,106 +0,0 @@ |
||||
diff -Nru linux-2.6.19.2/arch/mips/Kconfig linux-ar7/arch/mips/Kconfig
|
||||
--- linux-2.6.19.2/arch/mips/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/Kconfig 2007-01-29 21:52:21.000000000 +0700
|
||||
@@ -16,6 +16,21 @@
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
+config AR7
|
||||
+ bool "Texas Instruments AR7"
|
||||
+ select BOOT_ELF32
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select HW_HAS_PCI
|
||||
+ select IRQ_CPU
|
||||
+ select SWAP_IO_SPACE
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select SYS_SUPPORTS_KGDB
|
||||
+ select NEED_MULTIPLE_NODES
|
||||
+ select GENERIC_GPIO
|
||||
+
|
||||
config MIPS_MTX1
|
||||
bool "4G Systems MTX-1 board"
|
||||
select DMA_NONCOHERENT
|
||||
diff -Nru linux-2.6.19.2/arch/mips/Makefile linux-ar7/arch/mips/Makefile
|
||||
--- linux-2.6.19.2/arch/mips/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/Makefile 2007-01-29 21:52:21.000000000 +0700
|
||||
@@ -158,6 +158,13 @@
|
||||
#
|
||||
|
||||
#
|
||||
+# Texas Instruments AR7
|
||||
+#
|
||||
+core-$(CONFIG_AR7) += arch/mips/ar7/
|
||||
+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7
|
||||
+load-$(CONFIG_AR7) += 0xffffffff94100000
|
||||
+
|
||||
+#
|
||||
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
|
||||
#
|
||||
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
|
||||
diff -Nru linux-2.6.19.2/arch/mips/kernel/setup.c linux-ar7/arch/mips/kernel/setup.c
|
||||
--- linux-2.6.19.2orig/arch/mips/kernel/setup.c 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/kernel/setup.c 2007-03-04 22:32:13.000000000 +0700
|
||||
@@ -236,7 +236,7 @@
|
||||
* Initialize the bootmem allocator. It also setup initrd related data
|
||||
* if needed.
|
||||
*/
|
||||
-#ifdef CONFIG_SGI_IP27
|
||||
+#ifdef CONFIG_NEED_MULTIPLE_NODES
|
||||
|
||||
static void __init bootmem_init(void)
|
||||
{
|
||||
@@ -244,7 +244,7 @@
|
||||
finalize_initrd();
|
||||
}
|
||||
|
||||
-#else /* !CONFIG_SGI_IP27 */
|
||||
+#else /* !CONFIG_NEED_MULTIPLE_NODES */
|
||||
|
||||
static void __init bootmem_init(void)
|
||||
{
|
||||
@@ -349,7 +349,7 @@
|
||||
finalize_initrd();
|
||||
}
|
||||
|
||||
-#endif /* CONFIG_SGI_IP27 */
|
||||
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
|
||||
|
||||
/*
|
||||
* arch_mem_init - initialize memory managment subsystem
|
||||
diff -Nru linux-2.6.19.2/arch/mips/kernel/traps.c linux-ar7/arch/mips/kernel/traps.c
|
||||
--- linux-2.6.19.2/arch/mips/kernel/traps.c 2007-01-11 02:10:37.000000000 +0700
|
||||
+++ linux-ar7/arch/mips/kernel/traps.c 2007-03-15 13:19:19.000000000 +0700
|
||||
@@ -1072,11 +1072,6 @@
|
||||
unsigned long exception_handlers[32];
|
||||
unsigned long vi_handlers[64];
|
||||
|
||||
-/*
|
||||
- * As a side effect of the way this is implemented we're limited
|
||||
- * to interrupt handlers in the address range from
|
||||
- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ...
|
||||
- */
|
||||
void *set_except_vector(int n, void *addr)
|
||||
{
|
||||
unsigned long handler = (unsigned long) addr;
|
||||
@@ -1084,9 +1079,15 @@
|
||||
|
||||
exception_handlers[n] = handler;
|
||||
if (n == 0 && cpu_has_divec) {
|
||||
- *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
|
||||
- (0x03ffffff & (handler >> 2));
|
||||
- flush_icache_range(ebase + 0x200, ebase + 0x204);
|
||||
+ /* lui k0, 0x0000 */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16);
|
||||
+ /* ori k0, 0x0000 */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff);
|
||||
+ /* jr k0 */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008;
|
||||
+ /* nop */
|
||||
+ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000;
|
||||
+ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210);
|
||||
}
|
||||
return (void *)old_handler;
|
||||
}
|
||||
@ -1,39 +0,0 @@ |
||||
diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig
|
||||
--- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700
|
||||
@@ -152,6 +152,12 @@
|
||||
for your particular device. It won't happen automatically. The
|
||||
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
|
||||
|
||||
+config MTD_AR7_PARTS
|
||||
+ tristate "TI AR7 partitioning support"
|
||||
+ depends on MTD_PARTITIONS
|
||||
+ ---help---
|
||||
+ TI AR7 partitioning support
|
||||
+
|
||||
comment "User Modules And Translation Layers"
|
||||
depends on MTD
|
||||
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile
|
||||
--- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700
|
||||
@@ -12,6 +12,7 @@
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
|
||||
|
||||
# 'Users' - code which presents functionality to userspace.
|
||||
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
|
||||
diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c
|
||||
--- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700
|
||||
@@ -74,7 +74,7 @@
|
||||
|
||||
static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL };
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
|
||||
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
|
||||
#endif
|
||||
|
||||
static int physmap_flash_probe(struct platform_device *dev)
|
||||
@ -1,30 +0,0 @@ |
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100
|
||||
@@ -920,6 +920,15 @@
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called mwave.
|
||||
|
||||
+config AR7_GPIO
|
||||
+ tristate "TI AR7 GPIO Support"
|
||||
+ depends on AR7
|
||||
+ help
|
||||
+ Give userspace access to the GPIO pins on the Texas Instruments AR7
|
||||
+ processors.
|
||||
+
|
||||
+ If compiled as a module, it will be called ar7_gpio.
|
||||
+
|
||||
config SCx200_GPIO
|
||||
tristate "NatSemi SCx200 GPIO Support"
|
||||
depends on SCx200
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100
|
||||
@@ -83,6 +83,7 @@
|
||||
obj-$(CONFIG_PPDEV) += ppdev.o
|
||||
obj-$(CONFIG_NWBUTTON) += nwbutton.o
|
||||
obj-$(CONFIG_NWFLASH) += nwflash.o
|
||||
+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
|
||||
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
|
||||
obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
|
||||
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
|
||||
@ -1,27 +0,0 @@ |
||||
diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100
|
||||
@@ -19,6 +19,12 @@
|
||||
|
||||
comment "LED drivers"
|
||||
|
||||
+config LEDS_AR7
|
||||
+ tristate "LED Support for the TI AR7"
|
||||
+ depends LEDS_CLASS && AR7
|
||||
+ help
|
||||
+ This option enables support for the LEDs on TI AR7.
|
||||
+
|
||||
config LEDS_CORGI
|
||||
tristate "LED Support for the Sharp SL-C7x0 series"
|
||||
depends LEDS_CLASS && PXA_SHARP_C7xx
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100
|
||||
@@ -5,6 +5,7 @@
|
||||
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
|
||||
|
||||
# LED Platform Drivers
|
||||
+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o
|
||||
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
|
||||
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
|
||||
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
|
||||
@ -1,27 +0,0 @@ |
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig
|
||||
--- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100
|
||||
@@ -544,6 +544,12 @@
|
||||
|
||||
# MIPS Architecture
|
||||
|
||||
+config AR7_WDT
|
||||
+ tristate "TI AR7 Watchdog Timer"
|
||||
+ depends on WATCHDOG && AR7
|
||||
+ help
|
||||
+ Hardware driver for the TI AR7 Watchdog Timer.
|
||||
+
|
||||
config INDYDOG
|
||||
tristate "Indy/I2 Hardware Watchdog"
|
||||
depends on WATCHDOG && SGI_IP22
|
||||
diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile
|
||||
--- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100
|
||||
+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100
|
||||
@@ -71,6 +71,7 @@
|
||||
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
|
||||
|
||||
# MIPS Architecture
|
||||
+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
||||
|
||||
# S390 Architecture
|
||||
@ -1,30 +0,0 @@ |
||||
diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig
|
||||
--- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700
|
||||
@@ -1777,6 +1777,15 @@
|
||||
workstations.
|
||||
See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
|
||||
|
||||
+config CPMAC
|
||||
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
|
||||
+ depends on NET_ETHERNET && EXPERIMENTAL && AR7
|
||||
+ select PHYLIB
|
||||
+ select FIXED_PHY
|
||||
+ select FIXED_MII_100_FDX
|
||||
+ help
|
||||
+ TI AR7 CPMAC Ethernet support
|
||||
+
|
||||
config NET_POCKET
|
||||
bool "Pocket and portable adapters"
|
||||
depends on NET_ETHERNET && PARPORT
|
||||
diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile
|
||||
--- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700
|
||||
+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700
|
||||
@@ -148,6 +148,7 @@
|
||||
obj-$(CONFIG_8139TOO) += 8139too.o
|
||||
obj-$(CONFIG_ZNET) += znet.o
|
||||
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
|
||||
+obj-$(CONFIG_CPMAC) += cpmac.o
|
||||
obj-$(CONFIG_DEPCA) += depca.o
|
||||
obj-$(CONFIG_EWRK3) += ewrk3.o
|
||||
obj-$(CONFIG_ATP) += atp.o
|
||||
@ -1,94 +0,0 @@ |
||||
Index: linux-2.6.21.4/drivers/net/phy/fixed.c
|
||||
===================================================================
|
||||
--- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200
|
||||
+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200
|
||||
@@ -187,6 +187,19 @@
|
||||
.driver = { .owner = THIS_MODULE,},
|
||||
};
|
||||
|
||||
+static void fixed_mdio_release (struct device * dev)
|
||||
+{
|
||||
+ struct phy_device *phydev = container_of(dev, struct phy_device, dev);
|
||||
+ struct mii_bus *bus = phydev->bus;
|
||||
+ struct fixed_info *fixed = bus->priv;
|
||||
+
|
||||
+ kfree(phydev);
|
||||
+ kfree(bus->dev);
|
||||
+ kfree(bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+}
|
||||
+
|
||||
/*-----------------------------------------------------------------------------
|
||||
* This func is used to create all the necessary stuff, bind
|
||||
* the fixed phy driver and register all it on the mdio_bus_type.
|
||||
@@ -221,6 +234,12 @@
|
||||
}
|
||||
|
||||
fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
|
||||
+ if (NULL == fixed->regs) {
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed);
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
fixed->regs_num = MII_REGS_NUM;
|
||||
fixed->phy_status.speed = speed;
|
||||
fixed->phy_status.duplex = duplex;
|
||||
@@ -249,8 +268,11 @@
|
||||
fixed->phydev = phydev;
|
||||
|
||||
if(NULL == phydev) {
|
||||
- err = -ENOMEM;
|
||||
- goto device_create_fail;
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+ return -ENOMEM;
|
||||
}
|
||||
|
||||
phydev->irq = PHY_IGNORE_INTERRUPT;
|
||||
@@ -262,8 +284,34 @@
|
||||
else
|
||||
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
|
||||
"fixed@%d:%d", speed, duplex);
|
||||
+
|
||||
phydev->bus = new_bus;
|
||||
|
||||
+#if 1
|
||||
+ phydev->dev.driver = &fixed_mdio_driver.driver;
|
||||
+ phydev->dev.release = fixed_mdio_release;
|
||||
+
|
||||
+ err = phydev->dev.driver->probe(&phydev->dev);
|
||||
+ if(err < 0) {
|
||||
+ printk(KERN_ERR "Phy %s: problems with fixed driver\n",
|
||||
+ phydev->dev.bus_id);
|
||||
+ kfree(phydev);
|
||||
+ kfree(dev);
|
||||
+ kfree(new_bus);
|
||||
+ kfree(fixed->regs);
|
||||
+ kfree(fixed);
|
||||
+ return err;
|
||||
+ }
|
||||
+
|
||||
+ down_write(&phydev->dev.bus->subsys.rwsem);
|
||||
+ err = device_register(&phydev->dev);
|
||||
+ if(err) {
|
||||
+ printk(KERN_ERR "Phy %s failed to register\n",
|
||||
+ phydev->dev.bus_id);
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+#else
|
||||
err = device_register(&phydev->dev);
|
||||
if(err) {
|
||||
printk(KERN_ERR "Phy %s failed to register\n",
|
||||
@@ -306,6 +354,7 @@
|
||||
kfree(fixed);
|
||||
|
||||
return err;
|
||||
+#endif
|
||||
}
|
||||
|
||||
|
||||
@ -1,52 +0,0 @@ |
||||
diff -Nru linux-2.6.19.2/include/linux/serialP.h linux-ar7/include/linux/serialP.h
|
||||
--- linux-2.6.19.2/include/linux/serialP.h 2007-01-17 01:24:01.000000000 +0700
|
||||
+++ linux-ar7/include/linux/serialP.h 2007-03-22 22:36:48.000000000 +0700
|
||||
@@ -135,6 +135,9 @@
|
||||
* the interrupt line _up_ instead of down, so if we register the IRQ
|
||||
* while the UART is in that state, we die in an IRQ storm. */
|
||||
#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
|
||||
+#elif defined(CONFIG_AR7)
|
||||
+/* This is how it is set up by bootloader... */
|
||||
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 | UART_MCR_RTS | UART_MCR_DTR)
|
||||
#else
|
||||
#define ALPHA_KLUDGE_MCR 0
|
||||
#endif
|
||||
diff -Nru linux-2.6.19.2/include/linux/serial_core.h linux-ar7/include/linux/serial_core.h
|
||||
--- linux-2.6.19.2/include/linux/serial_core.h 2007-01-11 02:10:37.000000000 +0700
|
||||
+++ linux-ar7/include/linux/serial_core.h 2007-03-22 22:50:13.000000000 +0700
|
||||
@@ -39,7 +39,8 @@
|
||||
#define PORT_RSA 13
|
||||
#define PORT_NS16550A 14
|
||||
#define PORT_XSCALE 15
|
||||
-#define PORT_MAX_8250 15 /* max port ID */
|
||||
+#define PORT_AR7 16
|
||||
+#define PORT_MAX_8250 16 /* max port ID */
|
||||
|
||||
/*
|
||||
* ARM specific type numbers. These are not currently guaranteed
|
||||
diff -Nru linux-2.6.19.2/drivers/serial/8250.c linux-ar7/drivers/serial/8250.c
|
||||
--- linux-2.6.19.2/drivers/serial/8250.c 2007-01-11 02:10:37.000000000 +0700
|
||||
+++ linux-ar7/drivers/serial/8250.c 2007-03-22 22:45:17.000000000 +0700
|
||||
@@ -251,6 +251,13 @@
|
||||
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
|
||||
.flags = UART_CAP_FIFO | UART_CAP_UUE,
|
||||
},
|
||||
+ [PORT_AR7] = {
|
||||
+ .name = "TI-AR7",
|
||||
+ .fifo_size = 16,
|
||||
+ .tx_loadsz = 16,
|
||||
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
|
||||
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
|
||||
+ },
|
||||
};
|
||||
|
||||
#ifdef CONFIG_SERIAL_8250_AU1X00
|
||||
@@ -2243,7 +2250,7 @@
|
||||
{
|
||||
struct uart_8250_port *up = (struct uart_8250_port *)port;
|
||||
|
||||
- wait_for_xmitr(up, UART_LSR_THRE);
|
||||
+ wait_for_xmitr(up, BOTH_EMPTY);
|
||||
serial_out(up, UART_TX, ch);
|
||||
}
|
||||
|
||||
@ -1,11 +0,0 @@ |
||||
--- linux-2.6.19.orig/scripts/setlocalversion 2006-11-30 04:57:37.000000000 +0700
|
||||
+++ linux-2.6.19/scripts/setlocalversion 2006-12-25 12:50:53.000000000 +0700
|
||||
@@ -1,6 +1,8 @@
|
||||
#!/bin/sh
|
||||
# Print additional version information for non-release trees.
|
||||
|
||||
+exit 0
|
||||
+
|
||||
usage() {
|
||||
echo "Usage: $0 [srctree]" >&2
|
||||
exit 1
|
||||
Loading…
Reference in new issue