hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

x86: drop ep80579-drivers

Browse Source 
The subtarget on which the driver still depends was removed with
dee8986b95 because it was unmaintained
for a long time.

Signed-off-by: Mathias Kresin <dev@kresin.me>
master
Mathias Kresin 8 years ago
parent 053dc3b77a
commit 36c13e5927
29 changed files with 0 additions and 13884 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 92
      package/kernel/ep80579-drivers/Makefile
  2. 11755
      package/kernel/ep80579-drivers/patches/001-igbe_update.patch
  3. 22
      package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch
  4. 53
      package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch
  5. 56
      package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
  6. 41
      package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch
  7. 103
      package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
  8. 60
      package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch
  9. 20
      package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch
  10. 20
      package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
  11. 12
      package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch
  12. 747
      package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch
  13. 11
      package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch
  14. 11
      package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch
  15. 23
      package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch
  16. 40
      package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
  17. 59
      package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch
  18. 22
      package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch
  19. 22
      package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch
  20. 22
      package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch
  21. 30
      package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch
  22. 31
      package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch
  23. 11
      package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch
  24. 91
      package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch
  25. 392
      package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch
  26. 41
      package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch
  27. 33
      package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch
  28. 31
      package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch
  29. 33
      package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch

92
package/kernel/ep80579-drivers/Makefile
Unescape View File

@ -1,92 +0,0 @@
#
# Copyright (C) 2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=ep80579-drivers
PKG_VERSION:=1.0.34
PKG_RELEASE:=1
PKG_SOURCE:=Embedded.L.1.0.34.ADI.R100.tar.gz
PKG_SOURCE_URL:=ftp://ftp.adiengineering.com/Archive/OcracokeIsland/Drivers/Linux/1.0.34/
PKG_HASH:=f00684176a3dd1dc9ea8d96ecd1ecade5103f351ed93b9e3a5ff5f3f3295e2a9
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
include $(INCLUDE_DIR)/package.mk
define KernelPackage/ep80579-drivers/Default
DEPENDS:=@TARGET_x86_ep80579
endef
define KernelPackage/ep80579-eth
$(call KernelPackage/ep80579-drivers/Default)
SUBMENU:=Network Devices
TITLE:=Intel EP80579 ethernet driver
FILES:= \
$(PKG_BUILD_DIR)/Embedded/src/GbE/gcu.ko \
$(PKG_BUILD_DIR)/Embedded/src/GbE/iegbe.ko
AUTOLOAD:=$(call AutoLoad,40,gcu iegbe)
endef
define KernelPackage/ep80579-misc
$(call KernelPackage/ep80579-drivers/Default)
SUBMENU:=Other modules
TITLE:=Misc. Intel EP80579 drivers (DMA,, gpio)
FILES:= \
$(PKG_BUILD_DIR)/Embedded/src/EDMA/dma.ko \
$(PKG_BUILD_DIR)/Embedded/src/GPIO/gpio.ko
AUTOLOAD:=$(call AutoLoad,40,gpio dma)
endef
define KernelPackage/ep80579-can
$(call KernelPackage/ep80579-drivers/Default)
SUBMENU:=Other modules
TITLE:=Intel EP80579 CAN driver
FILES:= \
$(PKG_BUILD_DIR)/Embedded/src/1588/timesync.ko \
$(PKG_BUILD_DIR)/Embedded/src/CAN/can.ko
AUTOLOAD:=$(call AutoLoad,40,timesync can)
endef
define Build/Prepare
rm -rf $(PKG_BUILD_DIR)
mkdir -p $(PKG_BUILD_DIR)
tar xzvf $(DL_DIR)/$(PKG_SOURCE) -C $(PKG_BUILD_DIR)/
$(Build/Patch)
endef
define Build/Compile/Subdir
$(MAKE) -C "$(LINUX_DIR)" \
KSRC="$(LINUX_DIR)" \
KOBJ="$(LINUX_DIR)" \
ENV_DIR=$(PKG_BUILD_DIR)/Embedded \
SUBDIRS="$(PKG_BUILD_DIR)/Embedded/src/$(1)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
ARCHIVER="$(TARGET_CROSS)ar" \
COMPILER="$(TARGET_CC)" \
LINKER="$(TARGET_CROSS)ld" \
ARCH="$(LINUX_KARCH)"
endef
define Build/Compile
$(call Build/Compile/Subdir,GbE)
$(call Build/Compile/Subdir,CAN)
$(call Build/Compile/Subdir,EDMA)
$(call Build/Compile/Subdir,GPIO)
$(call Build/Compile/Subdir,WDT)
$(call Build/Compile/Subdir,1588)
endef
define KernelPackage/ep80579-eth/install
endef
$(eval $(call KernelPackage,ep80579-can))
$(eval $(call KernelPackage,ep80579-eth))
$(eval $(call KernelPackage,ep80579-misc))

11755
package/kernel/ep80579-drivers/patches/001-igbe_update.patch
View File

File diff suppressed because it is too large Load Diff

22
package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch
Unescape View File

@ -1,22 +0,0 @@
--- a/build_system/build_files/common.mk
+++ b/build_system/build_files/common.mk
@@ -122,7 +122,7 @@ CC=$(COMPILER)
LD=$(LINKER)
AR=$(ARCHIVER)
-CFLAGS+=-O2
+#CFLAGS+=-O2
PWD= $(shell pwd)
--- a/build_system/build_files/OS/linux_2.6.mk
+++ b/build_system/build_files/OS/linux_2.6.mk
@@ -80,7 +80,7 @@ endif
ifeq ($(OS_LEVEL), kernel_space)
-CFLAGS+=
+#CFLAGS+=
endif

53
package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch
Unescape View File

@ -1,53 +0,0 @@
--- a/Embedded/src/1588/1588.c
+++ b/Embedded/src/1588/1588.c
@@ -291,7 +291,7 @@ int pci_probe(struct pci_dev *dev, const
}
- if ( request_irq(dev->irq, &timesync_isr, SA_SHIRQ, DRIVERNAME,
+ if ( request_irq(dev->irq, &timesync_isr, IRQF_SHARED, DRIVERNAME,
&g_drvr_data) )
{
printk("%s-pci_probe: irq\n", DRIVERNAME);
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -424,7 +424,7 @@ int can_open(struct inode *inode, struct
err = request_irq(
can_os->irq,
can_irq_handler,
- SA_SHIRQ,
+ IRQF_SHARED,
iminor(can_os->inode) ? CAN_PROC_1 : CAN_PROC_0,
&(g_can_os[iminor(can_os->inode)])
);
--- a/Embedded/src/EDMA/dma_linux.c
+++ b/Embedded/src/EDMA/dma_linux.c
@@ -367,7 +367,7 @@ int32_t edma_resume(struct pci_dev *dev)
return -ENODEV;
}
- if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
+ if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
g_char_drvr_name, dev) )
{
@@ -829,7 +829,7 @@ int32_t edma_probe(struct pci_dev * dev,
/*
* Obtain a (shared) Interrupt Request (IRQ) Line from the OS.
*/
- if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
+ if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
g_char_drvr_name, dev) )
{
--- a/Embedded/src/WDT/iwdt.c
+++ b/Embedded/src/WDT/iwdt.c
@@ -1461,7 +1461,7 @@ static int __init wdt_init_one(struct pc
/* Request irq only if wdt_irq is other than 0 */
if (wdt_irq) {
- if (request_irq(wdt_irq, wdt_isr, SA_INTERRUPT | SA_SHIRQ,
+ if (request_irq(wdt_irq, wdt_isr, IRQF_DISABLED | IRQF_SHARED,
"iwdt", &wdt_miscdev)) {
printk("IRQ %d is not free.\n", wdt_irq);
return -EIO;

56
package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch
Unescape View File

@ -1,56 +0,0 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
kfree(data);
}
+static const struct net_device_ops iegbe_netdev_ops = {
+ .ndo_open = iegbe_open,
+ .ndo_stop = iegbe_close,
+ .ndo_start_xmit = iegbe_xmit_frame,
+ .ndo_get_stats = iegbe_get_stats,
+ .ndo_set_rx_mode = iegbe_set_rx_mode,
+ .ndo_set_mac_address = iegbe_set_mac,
+ .ndo_tx_timeout = iegbe_tx_timeout,
+ .ndo_change_mtu = iegbe_change_mtu,
+ .ndo_do_ioctl = iegbe_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+
+ .ndo_vlan_rx_register = iegbe_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = iegbe_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = iegbe_netpoll,
+#endif
+};
+
/**
* iegbe_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
if (!hw->hw_addr)
goto err_ioremap;
- netdev->open = &iegbe_open;
- netdev->stop = &iegbe_close;
- netdev->hard_start_xmit = &iegbe_xmit_frame;
- netdev->get_stats = &iegbe_get_stats;
- netdev->set_rx_mode = &iegbe_set_rx_mode;
- netdev->set_mac_address = &iegbe_set_mac;
- netdev->change_mtu = &iegbe_change_mtu;
- netdev->do_ioctl = &iegbe_ioctl;
+ netdev->netdev_ops = &iegbe_netdev_ops;
set_ethtool_ops(netdev);
- netdev->tx_timeout = &iegbe_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
- netdev->vlan_rx_register = iegbe_vlan_rx_register;
- netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
- netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- netdev->poll_controller = iegbe_netpoll;
-#endif
+
strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);

41
package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch
Unescape View File

@ -1,41 +0,0 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -3465,12 +3465,12 @@ static irqreturn_t iegbe_intr_msi(int ir
printk("Critical error! ICR = 0x%x\n", icr);
return IRQ_HANDLED;
}
- if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
+ if (likely(napi_schedule_prep(&adapter->napi))) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(netdev, &adapter->napi);
+ __napi_schedule(&adapter->napi);
} else
iegbe_irq_enable(adapter);
@@ -3527,12 +3527,12 @@ iegbe_intr(int irq, void *data)
E1000_WRITE_REG(&adapter->hw, IMC, ~0);
E1000_WRITE_FLUSH(&adapter->hw);
}
- if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
+ if (likely(napi_schedule_prep(&adapter->napi))) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(netdev, &adapter->napi);
+ __napi_schedule(&adapter->napi);
} else
/* this really should not happen! if it does it is basically a
* bug, but not a hard error, so enable ints and continue */
@@ -3574,7 +3574,7 @@ static int iegbe_clean(struct napi_struc
if (work_done < budget) {
if (likely(adapter->itr_setting & 3))
iegbe_set_itr(adapter);
- netif_rx_complete(poll_dev, napi);
+ napi_complete(napi);
iegbe_irq_enable(adapter);
}

103
package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch
Unescape View File

@ -1,103 +0,0 @@
--- a/Embedded/src/GbE/iegbe.h
+++ b/Embedded/src/GbE/iegbe.h
@@ -316,7 +316,6 @@ struct iegbe_adapter {
int cleaned_count);
struct iegbe_rx_ring *rx_ring; /* One per active queue */
struct napi_struct napi;
- struct net_device *polling_netdev; /* One per active queue */
int num_tx_queues;
int num_rx_queues;
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
struct iegbe_hw *hw;
static int cards_found = 0;
- int i, err, pci_using_dac;
+ int err, pci_using_dac;
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
int bars;
@@ -984,11 +984,8 @@ err_eeprom:
iegbe_phy_hw_reset(hw);
if (hw->flash_address)
iounmap(hw->flash_address);
- for (i = 0; i < adapter->num_rx_queues; i++)
- dev_put(&adapter->polling_netdev[i]);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
- kfree(adapter->polling_netdev);
err_sw_init:
iounmap(hw->hw_addr);
err_ioremap:
@@ -1017,7 +1014,6 @@ iegbe_remove(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct iegbe_adapter *adapter = netdev_priv(netdev);
uint32_t manc;
- int i;
if(adapter->hw.mac_type >= iegbe_82540
&& adapter->hw.mac_type != iegbe_icp_xxxx
@@ -1030,15 +1026,11 @@ iegbe_remove(struct pci_dev *pdev)
}
unregister_netdev(netdev);
- for (i = 0x0; i < adapter->num_rx_queues; i++)
- dev_put(&adapter->polling_netdev[i]);
-
if(!iegbe_check_phy_reset_block(&adapter->hw)) {
iegbe_phy_hw_reset(&adapter->hw);
}
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
- kfree(adapter->polling_netdev);
iounmap(adapter->hw.hw_addr);
pci_release_regions(pdev);
@@ -1061,7 +1053,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
struct iegbe_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- int i;
/* PCI config space info */
@@ -1111,11 +1102,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
return -ENOMEM;
}
- for (i = 0; i < adapter->num_rx_queues; i++) {
- adapter->polling_netdev[i].priv = adapter;
- dev_hold(&adapter->polling_netdev[i]);
- set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
- }
spin_lock_init(&adapter->tx_queue_lock);
/*
@@ -1137,8 +1123,7 @@ iegbe_sw_init(struct iegbe_adapter *adap
* @adapter: board private structure to initialize
*
* We allocate one ring per queue at run-time since we don't know the
- * number of queues at compile-time. The polling_netdev array is
- * intended for Multiqueue, but should work fine with a single queue.
+ * number of queues at compile-time.
**/
static int __devinit
@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
return -ENOMEM;
}
- adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
- sizeof(struct net_device),
- GFP_KERNEL);
- if (!adapter->polling_netdev) {
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
- return -ENOMEM;
- }
-
return E1000_SUCCESS;
}

60
package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch
Unescape View File

@ -1,60 +0,0 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -2161,7 +2161,8 @@ static void iegbe_set_rx_mode(struct net
{
struct iegbe_adapter *adapter = netdev_priv(netdev);
struct iegbe_hw *hw = &adapter->hw;
- struct dev_addr_list *uc_ptr;
+ struct netdev_hw_addr *ha;
+ bool use_uc = false;
struct dev_addr_list *mc_ptr;
u32 rctl;
u32 hash_value;
@@ -2187,12 +2188,11 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
}
}
- uc_ptr = NULL;
if (netdev->uc_count > rar_entries - 1) {
rctl |= E1000_RCTL_UPE;
} else if (!(netdev->flags & IFF_PROMISC)) {
rctl &= ~E1000_RCTL_UPE;
- uc_ptr = netdev->uc_list;
+ use_uc = true;
}
E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
@@ -2210,13 +2210,20 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
* if there are not 14 addresses, go ahead and clear the filters
* -- with 82571 controllers only 0-13 entries are filled here
*/
+ i = 1;
+ if (use_uc)
+ list_for_each_entry(ha, &netdev->uc_list, list) {
+ if (i == rar_entries)
+ break;
+ iegbe_rar_set(hw, ha->addr, i++);
+ }
+
+ WARN_ON(i == rar_entries);
+
mc_ptr = netdev->mc_list;
- for (i = 1; i < rar_entries; i++) {
- if (uc_ptr) {
- iegbe_rar_set(hw, uc_ptr->da_addr, i);
- uc_ptr = uc_ptr->next;
- } else if (mc_ptr) {
+ for (; i < rar_entries; i++) {
+ if (mc_ptr) {
iegbe_rar_set(hw, mc_ptr->da_addr, i);
mc_ptr = mc_ptr->next;
} else {
@@ -2226,7 +2233,6 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
E1000_WRITE_FLUSH(&adapter->hw);
}
}
- WARN_ON(uc_ptr != NULL);
/* clear the old settings from the multicast hash table */

20
package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch
Unescape View File

@ -1,20 +0,0 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -2188,7 +2188,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
}
}
- if (netdev->uc_count > rar_entries - 1) {
+ if (netdev->uc.count > rar_entries - 1) {
rctl |= E1000_RCTL_UPE;
} else if (!(netdev->flags & IFF_PROMISC)) {
rctl &= ~E1000_RCTL_UPE;
@@ -2212,7 +2212,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
*/
i = 1;
if (use_uc)
- list_for_each_entry(ha, &netdev->uc_list, list) {
+ list_for_each_entry(ha, &netdev->uc.list, list) {
if (i == rar_entries)
break;
iegbe_rar_set(hw, ha->addr, i++);

20
package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch
Unescape View File

@ -1,20 +0,0 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
if (err)
return err;
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
- !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
+ !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
pci_using_dac = 1;
} else {
- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
E1000_ERR("No usable DMA configuration, "
"aborting\n");

12
package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch
Unescape View File

@ -1,12 +0,0 @@
--- a/Embedded/src/GbE/iegbe_ethtool.c
+++ b/Embedded/src/GbE/iegbe_ethtool.c
@@ -944,7 +944,8 @@ iegbe_intr_test(struct iegbe_adapter *ad
*data = 0;
/* Hook up test interrupt handler just for this test */
- if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
+ if(!request_irq(irq, &iegbe_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev)) {
shared_int = FALSE;
} else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
netdev->name, netdev)){

747
package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch
Unescape View File

@ -1,747 +0,0 @@
--- a/Embedded/src/GbE/iegbe_oem_phy.c
+++ b/Embedded/src/GbE/iegbe_oem_phy.c
@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
+static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
+static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
+static int32_t oi_phy_setup (struct iegbe_hw *hw);
+
/**
* iegbe_oem_setup_link
* @hw: iegbe_hw struct containing device specific information
@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
}
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ return E1000_SUCCESS;
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_link_m88_setup(hw);
@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
return ret_val;
}
break;
+ case BCM5481_PHY_ID:
+ ret_val = iegbe_oem_link_bcm5481_setup(hw);
+ if(ret_val) {
+ return ret_val;
+ }
+ break;
default:
DEBUGOUT("Invalid PHY ID\n");
return -E1000_ERR_PHY_TYPE;
@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
#endif /* ifdef EXTERNAL_MDIO */
}
+/**
+ * iegbe_oem_link_bcm5481_setup
+ * @hw: iegbe_hw struct containing device specific information
+ *
+ * Returns E1000_SUCCESS, negative E1000 error code on failure
+ *
+ * copied verbatim from iegbe_oem_link_m88_setup
+ **/
+static int32_t
+iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
+{
+ int32_t ret_val;
+ uint16_t phy_data;
+
+ //DEBUGFUNC(__func__);
+
+ if(!hw)
+ return -1;
+
+ /* phy_reset_disable is set in iegbe_oem_set_phy_mode */
+ if(hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ // Enable MDIX in extended control reg.
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
+ if(ret_val)
+ {
+ DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
+ return ret_val;
+ }
+
+ phy_data &= ~BCM5481_ECTRL_DISMDIX;
+ ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
+ if(ret_val)
+ {
+ DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
+ return ret_val;
+ }
+
+ ret_val = oi_phy_setup (hw);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
/**
* iegbe_oem_link_m88_setup
@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
* see iegbe_phy_force_speed_duplex, which does the following for M88
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw,
@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
+ case BCM5395S_PHY_ID:
DEBUGOUT("No DSP to reset on OEM PHY\n");
break;
default:
@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
* see iegbe_phy_force_speed_duplex, which does the following for M88
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
/*
@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
* use iegbe_set_phy_mode as example
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_read_eeprom(hw,
@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
}
hw->phy_type = iegbe_phy_oem;
+{
+ // If MAC2 (BCM5395 switch), manually detect the phy
+ struct iegbe_adapter *adapter;
+ uint32_t device_number;
+ adapter = (struct iegbe_adapter *) hw->back;
+ device_number = PCI_SLOT(adapter->pdev->devfn);
+ if (device_number == ICP_XXXX_MAC_2) {
+ hw->phy_id = BCM5395S_PHY_ID;
+ hw->phy_revision = 0;
+ return E1000_SUCCESS;
+ }
+}
+
ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
if(ret_val) {
DEBUGOUT("Unable to read PHY register PHY_ID1\n");
@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
+ case BCM5395S_PHY_ID:
phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
break;
default:
@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
+ case BCM5395S_PHY_ID:
isCopper = TRUE;
break;
default:
@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
switch(device_number)
{
case ICP_XXXX_MAC_0:
- hw->phy_addr = 0x00;
+ hw->phy_addr = 0x01;
break;
case ICP_XXXX_MAC_1:
- hw->phy_addr = 0x01;
+ hw->phy_addr = 0x02;
break;
case ICP_XXXX_MAC_2:
- hw->phy_addr = 0x02;
+ hw->phy_addr = 0x00;
break;
default: hw->phy_addr = 0x00;
}
@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
if(!adapter || !ifr) {
return -1;
}
+
+ // If MAC2 (BCM5395 switch) then leave now
+ if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
+ return -1;
+ }
+
switch (data->reg_num) {
case PHY_CTRL:
if(mii_reg & MII_CR_POWER_DOWN) {
@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
* [10] = mdix mode
*/
switch (adapter->hw.phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
if(corrected_len > 0) {
@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
* Loopback configuration is the same for each of the supported PHYs.
*/
switch (adapter->hw.phy_id) {
+ case BCM5395S_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
adapter->hw.autoneg = FALSE;
@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
}
switch (adapter->hw.phy_id) {
+ case BCM5395S_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
+ return;
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
default:
adapter->hw.autoneg = TRUE;
@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ *isDowngraded = 0;
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ *polarity = 0;
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
/* return the Polarity bit in the Status register. */
@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ /* Always full duplex */
+ *isFD = 1;
+ break;
+
+ case BCM5481_PHY_ID:
+ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
+ if(ret_val) return ret_val;
+
+ switch (BCM5481_ASTAT_HCD(phy_data)) {
+ case BCM5481_ASTAT_1KBTFD:
+ case BCM5481_ASTAT_100BTXFD:
+ *isFD = 1;
+ break;
+ default:
+ *isFD = 0;
+ }
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ /* Always 1000mb */
+ *is1000 = 1;
+ break;
+
+ case BCM5481_PHY_ID:
+ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
+ if(ret_val) return ret_val;
+
+ switch (BCM5481_ASTAT_HCD(phy_data)) {
+ case BCM5481_ASTAT_1KBTFD:
+ case BCM5481_ASTAT_1KBTHD:
+ *is1000 = 1;
+ break;
+ default:
+ *is1000 = 0;
+ }
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
* see iegbe_config_mac_to_phy
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ /* Always 1000Mb, never 100mb */
+ *is100 = 0;
+ break;
+
+ case BCM5481_PHY_ID:
+ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
+ if(ret_val) return ret_val;
+
+ switch (BCM5481_ASTAT_HCD(phy_data)) {
+ case BCM5481_ASTAT_100BTXFD:
+ case BCM5481_ASTAT_100BTXHD:
+ *is100 = 1;
+ break;
+ default:
+ *is100 = 0;
+ }
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw,
@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
* see iegbe_phy_m88_get_info
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
/* The downshift status is checked only once, after link is
@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
* the M88 used in truxton.
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
if(ret_val) {
DEBUGOUT("Unable to read register PHY_CTRL\n");
@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
+ case BCM5395S_PHY_ID:
DEBUGOUT("Nothing to do for OEM PHY Init");
break;
default:
@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
return -1;
}
+ if (hw->phy_id == BCM5395S_PHY_ID) {
+ DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
+ return -1;
+ }
+
/* call the GCU func that will read the phy
*
* Make note that the M88 phy is what'll be used on Truxton.
@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
}
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
/* Gasket set correctly for Marvell Phys, so nothing to do */
@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
+ case BCM5395S_PHY_ID:
ret_val = FALSE;
break;
default:
@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
switch (hw->phy_id) {
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
+ case BCM5481_PHY_ID:
+ case BCM5395S_PHY_ID:
DEBUGOUT("No DSP to configure on OEM PHY");
break;
default:
@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
}
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ case BCM5481_PHY_ID:
+ *min_length = 0;
+ *max_length = iegbe_igp_cable_length_150;
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
ret_val = iegbe_oem_read_phy_reg_ex(hw,
@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
*/
switch (hw->phy_id) {
+ case BCM5395S_PHY_ID:
+ /* Link always up */
+ *isUp = TRUE;
+ return E1000_SUCCESS;
+ break;
+
+ case BCM5481_PHY_ID:
+ iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
+ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
+ if(ret_val)
+ {
+ DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
+ return ret_val;
+ }
+ statusMask = BCM5481_ESTAT_LINK;
+ break;
+
case M88E1000_I_PHY_ID:
case M88E1141_E_PHY_ID:
iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
#endif /* ifdef EXTERNAL_MDIO */
}
+
+
+//-----
+// Read BCM5481 expansion register
+//
+int32_t
+bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
+{
+ int ret;
+ uint16_t selector;
+ uint16_t reg_data;
+
+ // Get the current value of bits 15:12
+ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
+ if (ret)
+ return ret;
+
+ // Select the expansion register
+ selector &= 0xf000;
+ selector |= (0xf << 8) | (reg);
+ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
+
+ // Read the expansion register
+ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
+
+ // De-select the expansion registers.
+ selector &= 0xf000;
+ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
+
+ if (ret)
+ return ret;
+
+ *data = reg_data;
+ return ret;
+}
+
+//-----
+// Read reg 0x18 sub-register
+//
+static int32_t
+bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
+{
+ int ret;
+ uint16_t tmp_data;
+
+ // Select reg 0x18, sv
+ tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
+ if(ret)
+ return ret;
+
+ // Read reg 0x18, sv
+ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
+ if(ret)
+ return ret;
+
+ *data = tmp_data;
+ return ret;
+}
+
+//-----
+// Read reg 0x1C sub-register
+//
+int32_t
+bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
+{
+ int ret;
+ uint16_t tmp_data;
+
+ // Select reg 0x1c, sv
+ tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
+
+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
+ if(ret)
+ return ret;
+
+ // Read reg 0x1c, sv
+ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
+ if(ret)
+ return ret;
+
+ *data = tmp_data;
+ return ret;
+}
+
+//-----
+// Read-modify-write a 0x1C register.
+//
+// hw - hardware access info.
+// reg - 0x1C register to modify.
+// data - bits which should be set.
+// mask - the '1' bits in this argument will be cleared in the data
+// read from 'reg' then 'data' will be or'd in and the result
+// will be written to 'reg'.
+
+int32_t
+bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
+{
+ int32_t ret;
+ uint16_t reg_data;
+
+ ret = 0;
+
+ ret = bcm5481_read_1csv (hw, reg, &reg_data);
+ if (ret)
+ {
+ DEBUGOUT("Unable to read BCM5481 1CH register\n");
+ printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
+ return ret;
+ }
+
+ reg_data &= ~mask;
+ reg_data |= (BCM5481_R1CH_WE | data);
+
+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
+ if(ret)
+ {
+ DEBUGOUT("Unable to write BCM5481 1CH register\n");
+ printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+int32_t
+oi_phy_setup (struct iegbe_hw *hw)
+{
+ int ret;
+ uint16_t pmii_data;
+ uint16_t mctrl_data;
+ uint16_t cacr_data;
+
+ ret = 0;
+
+ // Set low power mode via reg 0x18, sv010, bit 6
+ // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
+ ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
+ if (ret)
+ {
+ DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
+ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
+ return ret;
+ }
+
+ // Set the LPM bit in the data just read and write back to sv010
+ // The shadow register select bits [2:0] are set by reading the sv010
+ // register.
+ pmii_data |= BCM5481_R18H_SV010_LPM;
+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
+ if(ret)
+ {
+ DEBUGOUT("Unable to write BCM5481_R18H register\n");
+ printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
+ return ret;
+ }
+
+
+ // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
+
+ if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
+ {
+ DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
+ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
+ return ret;
+ }
+ mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
+
+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
+ if(ret)
+ {
+ DEBUGOUT("Unable to write BCM5481_R18H register\n");
+ printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
+ return ret;
+ }
+
+ // Enable RGMII transmit clock delay in reg 0x1c, sv00011
+ ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
+ if (ret)
+ {
+ DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
+ printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
+ return ret;
+ }
+
+ cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
+
+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
+ if(ret)
+ {
+ DEBUGOUT("Unable to write BCM5481_R1CH register\n");
+ printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
+ return ret;
+ }
+
+ // Enable dual link speed indication (0x1c, sv 00010, bit 2)
+ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
+ if (ret)
+ return ret;
+
+ // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
+ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
+ if (ret)
+ return ret;
+
+ return ret;
+}
--- a/Embedded/src/GbE/iegbe_oem_phy.h
+++ b/Embedded/src/GbE/iegbe_oem_phy.h
@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
#define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */
#define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
+#define BCM5481_PHY_ID 0x0143BCA0
+#define BCM5395S_PHY_ID 0x0143BCF0
/* Miscellaneous defines */
#ifdef IEGBE_10_100_ONLY
@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
#define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F
#endif
+/* BCM5481 specifics */
+
+#define BCM5481_ECTRL (0x10)
+#define BCM5481_ESTAT (0x11)
+#define BCM5481_RXERR (0x12)
+#define BCM5481_EXPRW (0x15)
+#define BCM5481_EXPACC (0x17)
+#define BCM5481_ASTAT (0x19)
+#define BCM5481_R18H (0x18)
+#define BCM5481_R1CH (0x1c)
+
+/* indirect register access via register 18h */
+
+#define BCM5481_R18H_SV_MASK (7) // Mask for SV bits.
+#define BCM5481_R18H_SV_ACTRL (0) // SV000 Aux. control
+#define BCM5481_R18H_SV_10BT (1) // SV001 10Base-T
+#define BCM5481_R18H_SV_PMII (2) // SV010 Power/MII control
+#define BCM5481_R18H_SV_MTEST (4) // SV100 Misc. test
+#define BCM5481_R18H_SV_MCTRL (7) // SV111 Misc. control
+
+#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity
+#define BCM5481_R18H_SV010_LPM (1 << 6)
+#define BCM5481_R18H_SV111_SKEW (1 << 8)
+#define BCM5481_R18H_WE (1 << 15) // Write enable
+
+// 0x1c registers
+#define BCM5481_R1CH_SV_SHIFT (10)
+#define BCM5481_R1CH_SV_MASK (0x1f)
+#define BCM5481_R1CH_SC1 (0x02) // sv00010 Spare control 1
+#define BCM5481_R1CH_CACR (0x03) // sv00011 Clock alignment control
+#define BCM5481_R1CH_LCTRL (0x09) // sv01001 LED control
+#define BCM5481_R1CH_LEDS1 (0x0d) // sv01101 LED selector 1
+
+// 0x1c common
+#define BCM5481_R1CH_WE (1 << 15) // Write enable
+
+// 0x1c, sv 00010
+#define BCM5481_R1CH_SC1_LINK (1 << 2) // sv00010 Linkspeed
+
+// 0x1c, sv 00011
+#define BCM5481_R1CH_CACR_TCD (1 << 9) // sv00011 RGMII tx clock delay
+
+// 0x1c, sv 01001
+#define BCM5481_R1CH_LCTRL_ALEN (1 << 4) // Activity/Link enable on ACTIVITY LED
+#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED
+
+#define BCM5481_ECTRL_DISMDIX (1 <<14)
+
+#define BCM5481_MCTRL_AUTOMDIX (1 <<9)
+
+#define BCM5481_ESTAT_LINK (1 << 8)
+
+#define BCM5481_ASTAT_ANC (1 << 15)
+#define BCM5481_ASTAT_ANHCD (7 << 8)
+#define BCM5481_ASTAT_HCD(x) ((x >> 8) & 7)
+#define BCM5481_ASTAT_1KBTFD (0x7)
+#define BCM5481_ASTAT_1KBTHD (0x6)
+#define BCM5481_ASTAT_100BTXFD (0x5)
+#define BCM5481_ASTAT_100BTXHD (0x3)
+
#endif /* ifndef _IEGBE_OEM_PHY_H_ */

11
package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch
Unescape View File

@ -1,11 +0,0 @@
--- a/Embedded/src/CAN/icp_can_user.h
+++ b/Embedded/src/CAN/icp_can_user.h
@@ -63,6 +63,8 @@
#ifndef __ICP_CAN_USER_H__
#define __ICP_CAN_USER_H__
+#include <linux/ioctl.h>
+
/*****************************************************************************
* Device IO control codes.
*****************************************************************************/

11
package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch
Unescape View File

@ -1,11 +0,0 @@
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -70,6 +70,8 @@
#include "can_main.h"
#include "can_ioctl.h"
+#include <linux/fs.h>
+
MODULE_AUTHOR("Intel(R) Corporation");
MODULE_DESCRIPTION("Controller Area Network Driver");

23
package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch
Unescape View File

@ -1,23 +0,0 @@
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -654,7 +654,7 @@ int can_dev_io(struct inode *inode, stru
/*****************************************************************************
* Interrupt handler.
*****************************************************************************/
-irqreturn_t can_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t can_irq_handler(int irq, void *dev_id)
{
can_os_t *can_os = (can_os_t *) dev_id;
unsigned int int_status;
--- a/Embedded/src/CAN/can_main.h
+++ b/Embedded/src/CAN/can_main.h
@@ -165,8 +165,7 @@ int can_dev_io(
irqreturn_t can_irq_handler(
int irq,
- void *dev_id,
- struct pt_regs *regs);
+ void *dev_id);
void can_tasklet(
unsigned long arg

40
package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch
Unescape View File

@ -1,40 +0,0 @@
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -214,8 +214,8 @@ int can_pci_probe(struct pci_dev *dev, c
spin_lock_init(&(g_can_os[can_num].int_spinlock));
spin_lock_init(&(g_can_os[can_num].open_spinlock));
- dev->dev.driver_data = (void *) &(g_can_os[can_num]);
- if (!dev->dev.driver_data)
+ dev_set_drvdata(&dev->dev, (void *) &(g_can_os[can_num]));
+ if (!dev_get_drvdata(&dev->dev))
{
printk("Couldn't create CAN device %d. Exiting.\n",
dev->device);
@@ -237,7 +237,7 @@ int can_pci_probe(struct pci_dev *dev, c
*****************************************************************************/
void can_pci_remove(struct pci_dev *dev)
{
- can_os_t *can_os = dev->dev.driver_data;
+ can_os_t *can_os = dev_get_drvdata(&dev->dev);
iounmap(can_os->pci_remap);
icp_can_destroy(can_os->can);
@@ -251,7 +251,7 @@ int can_pci_suspend(struct pci_dev *dev,
{
unsigned int i;
unsigned int int_status;
- can_os_t *can_os = dev->dev.driver_data;
+ can_os_t *can_os = dev_get_drvdata(&dev->dev);
int err;
/* Indicate that we are suspending */
@@ -322,7 +322,7 @@ int can_pci_suspend(struct pci_dev *dev,
int can_pci_resume(struct pci_dev *dev)
{
unsigned int i;
- can_os_t *can_os = dev->dev.driver_data;
+ can_os_t *can_os = dev_get_drvdata(&dev->dev);
/* Restore PCI CFG space */
pci_restore_state(dev);

59
package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch
Unescape View File

@ -1,59 +0,0 @@
--- a/Embedded/src/WDT/iwdt.c
+++ b/Embedded/src/WDT/iwdt.c
@@ -180,19 +180,19 @@ MODULE_PARM_DESC(wdt_scale, "Intel WDT s
module_param(wdt_intr_type, byte, WDT_INT_TYPE_IRQ);
MODULE_PARM_DESC(wdt_intr_type, "Intel WDT interrupt type (default SERIRQ).");
-module_param(wdt_margin1, uint, TIMER_MARGIN);
+module_param(wdt_margin1, uint, 0);
MODULE_PARM_DESC(wdt_margin1, "First stage Intel WDT timeout in steps of 1 ms by default.");
-module_param(wdt_margin2, uint, TIMER_MARGIN);
+module_param(wdt_margin2, uint, 0);
MODULE_PARM_DESC(wdt_margin2, "Second stage Intel WDT timeout in steps of 1 ms by default.");
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Intel WDT can't be stopped once started (default=0)");
-module_param(wdt_index_port, int, 0x4E);
+module_param(wdt_index_port, int, 0);
MODULE_PARM_DESC(wdt_index_port, "WDT Index Port (default 0x4e)");
-module_param(wdt_data_port, int, 0x4E);
+module_param(wdt_data_port, int, 0);
MODULE_PARM_DESC(wdt_data_port, "WDT Data Port (default 0x4f)");
static int wdt_get_iobase(struct pci_dev *dev, u16 *iobase, int *irq);
@@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *fi
size_t count, loff_t * pos);
static int wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
-static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t wdt_isr(int irq, void *dev_id);
static void __exit wdt_cleanup(void);
static int __init wdt_init(void);
static int __init wdt_init_one(struct pci_dev *dev,
@@ -255,7 +255,7 @@ static struct pci_driver wdt_driver = {
name: "iwdt",
id_table: lpc_pci_tbl,
probe: wdt_init_one,
- remove: __devexit(wdt_remove_one),
+ remove: __devexit_p(wdt_remove_one),
suspend: wdt_pci_suspend,
resume: wdt_pci_resume,
};
@@ -1393,12 +1393,12 @@ static int wdt_ioctl(struct inode *inode
/*
* Function Name: wdt_isr()
- * Parameter: int irq - irq number, void *dev_id, struct pt_regs *regs
+ * Parameter: int irq - irq number, void *dev_id
* Return Value:: IRQ_NONE - if the interrupt is not for wdt.
* IRQ_HANDLED - if it is for wdt.
* Description: This is the interrupt service routine of the WDT.
*/
-static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t wdt_isr(int irq, void *dev_id)
{
u8 val;

22
package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch
Unescape View File

@ -1,22 +0,0 @@
--- a/Embedded/src/EDMA/dma_linux.c
+++ b/Embedded/src/EDMA/dma_linux.c
@@ -149,8 +149,7 @@ int32_t edma_suspend (struct pci_dev *de
int32_t edma_resume(struct pci_dev *dev);
int32_t initialize_edma_device(struct edma_device *device);
-static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
- struct pt_regs * regs);
+static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id);
/* Prototypes - Misc. */
@@ -429,8 +428,7 @@ int32_t edma_release(struct inode * inod
* Return Values: HANDLED = 1, NOT_HANDLED = 0
*****************************************************************************/
-static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
- struct pt_regs * regs)
+static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id)
{
uint32_t clear_bits;

22
package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch
Unescape View File

@ -1,22 +0,0 @@
--- a/Embedded/src/1588/1588.c
+++ b/Embedded/src/1588/1588.c
@@ -631,7 +631,7 @@ int restore_interrupts(void)
IRQ_NONE => this device did not interrupt
******************************************************************************/
-irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t timesync_isr(int irq, void *dev_id)
{
if ( !ixTimeSyncAccEventAmmsFlagGet() && !ixTimeSyncAccEventAsmsFlagGet()&&
!ixTimeSyncAccEventAtmFlagGet() && !ixTimeSyncAccEventPpsmFlagGet()&&
--- a/Embedded/src/1588/1588.h
+++ b/Embedded/src/1588/1588.h
@@ -128,7 +128,7 @@ int pci_suspend(struct pci_dev *dev, pm_
int pci_resume(struct pci_dev *dev);
int pci_probe(struct pci_dev *dev, const struct pci_device_id *id);
void pci_remove(struct pci_dev *dev);
-irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs);
+irqreturn_t timesync_isr(int irq, void *dev_id);
// private functions
int save_reg_state(void);

22
package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch
Unescape View File

@ -1,22 +0,0 @@
--- a/Embedded/src/CAN/can_main.h
+++ b/Embedded/src/CAN/can_main.h
@@ -65,7 +65,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <asm/semaphore.h>
+#include <linux/semaphore.h>
#include <linux/spinlock.h>
#include <linux/cdev.h>
#include <asm/uaccess.h>
--- a/Embedded/src/EDMA/dma_linux.c
+++ b/Embedded/src/EDMA/dma_linux.c
@@ -87,7 +87,7 @@
#include <linux/fcntl.h> /* O_ACCMODE */
#include <asm/system.h> /* cli, *_flags */
#include <asm/uaccess.h> /* copy_to_user */
-#include <asm/semaphore.h>
+#include <linux/semaphore.h>
#include <asm/io.h> /* inb(), outb() */
#include <linux/kmod.h>
#include <linux/ioport.h> /* request_region */

30
package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch
Unescape View File

@ -1,30 +0,0 @@
--- a/Embedded/src/1588/1588.c
+++ b/Embedded/src/1588/1588.c
@@ -72,6 +72,7 @@
*
****************************************************************************/
+#include <linux/sched.h>
#include "1588.h"
MODULE_AUTHOR("Intel(R) Corporation");
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -68,6 +68,7 @@
*
**************************************************************************/
+#include <linux/sched.h>
#include "can_main.h"
#include "can_ioctl.h"
#include <linux/fs.h>
--- a/Embedded/src/WDT/iwdt.c
+++ b/Embedded/src/WDT/iwdt.c
@@ -137,6 +137,7 @@
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include "iwdt.h"
MODULE_AUTHOR("Intel(R) Corporation");

31
package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch
Unescape View File

@ -1,31 +0,0 @@
--- a/Embedded/src/GbE/kcompat.h
+++ b/Embedded/src/GbE/kcompat.h
@@ -46,12 +46,6 @@ GPL LICENSE SUMMARY
#include <linux/sched.h>
#include <asm/io.h>
-#ifndef IRQ_HANDLED
-#define irqreturn_t void
-#define IRQ_HANDLED
-#define IRQ_NONE
-#endif
-
#ifndef SET_NETDEV_DEV
#define SET_NETDEV_DEV(net, pdev)
#endif
@@ -748,6 +742,15 @@ extern void dump_stack(void);
#endif /* 2.4.24 */
+/*****************************************************************************/
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
+#ifndef IRQ_HANDLED
+#define irqreturn_t void
+#define IRQ_HANDLED
+#define IRQ_NONE
+#endif
+#endif /* < 2.6.30 */
+
#endif /* _KCOMPAT_H_ */

11
package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch
Unescape View File

@ -1,11 +0,0 @@
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -3534,7 +3534,7 @@ static int iegbe_clean(struct napi_struc
int tx_cleaned = 0, work_done = 0;
/* Must NOT use netdev_priv macro here. */
- adapter = poll_dev->priv;
+ adapter = netdev_priv(poll_dev);
/* iegbe_clean is called per-cpu. This lock protects
* tx_ring[0] from being cleaned by multiple cpus

91
package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch
Unescape View File

@ -1,91 +0,0 @@
--- a/Embedded/src/GbE/Makefile
+++ b/Embedded/src/GbE/Makefile
@@ -60,19 +60,19 @@ GBE_NAME = iegbe
GCU_NAME = gcu
VERSION_FILE := $(KSRC)/include/linux/version.h
-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-CONFIG_FILE := $(KSRC)/include/linux/autoconf.h
+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
+CONFIG_FILE := $(KSRC)/include/generated/autoconf.h
ifeq (,$(wildcard $(VERSION_FILE)))
$(error Linux kernel source not configured - missing version.h)
endif
ifeq (,$(wildcard $(CONFIG_FILE)))
- $(error Linux kernel source not configured - missing autoconf.h)
+ $(error Linux kernel source not configured - missing autoconf.h)
endif
ifeq (,$(wildcard $(UTS_REL_FILE)))
- $(error Linux kernel source not configured - missing utsrelease.h)
+ $(error Linux kernel source not configured - missing utsrelease.h)
endif
# set the install path
--- a/Embedded/src/1588/Makefile
+++ b/Embedded/src/1588/Makefile
@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
EXTRA_LDFLAGS += -whole-archive
VERSION_FILE := $(KOBJ)/include/linux/version.h
-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
+CONFIG_FILE := $(KOBJ)/include/generated/autoconf.h
# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
--- a/Embedded/src/CAN/Makefile
+++ b/Embedded/src/CAN/Makefile
@@ -100,8 +100,8 @@ OUTPUT_PATH ?= /
EXTRA_LDFLAGS += -whole-archive
VERSION_FILE := $(KOBJ)/include/linux/version.h
-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
+CONFIG_FILE := $(KOBJ)/include/generated/autoconf.h
# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
--- a/Embedded/src/EDMA/Makefile
+++ b/Embedded/src/EDMA/Makefile
@@ -114,8 +114,8 @@ OUTPUT_PATH ?= /
EXTRA_LDFLAGS += -whole-archive
VERSION_FILE := $(KOBJ)/include/linux/version.h
-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
+CONFIG_FILE := $(KOBJ)/include/generated/autoconf.h
# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
--- a/Embedded/src/GPIO/Makefile
+++ b/Embedded/src/GPIO/Makefile
@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
EXTRA_LDFLAGS += -whole-archive
VERSION_FILE := $(KOBJ)/include/linux/version.h
-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
+CONFIG_FILE := $(KOBJ)/include/generated/autoconf.h
# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
--- a/Embedded/src/WDT/Makefile
+++ b/Embedded/src/WDT/Makefile
@@ -99,8 +99,8 @@ OUTPUT_PATH ?= /
EXTRA_LDFLAGS += -whole-archive
VERSION_FILE := $(KOBJ)/include/linux/version.h
-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
-CONFIG_FILE := $(KOBJ)/include/linux/autoconf.h
+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
+CONFIG_FILE := $(KOBJ)/include/generated/autoconf.h
# as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h

392
package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch
Unescape View File

@ -1,392 +0,0 @@
--- a/Embedded/src/GbE/kcompat.h
+++ b/Embedded/src/GbE/kcompat.h
@@ -590,6 +590,10 @@ static inline void _kc_synchronize_irq()
#define ETHTOOL_OPS_COMPAT
#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
+#define HAVE_NETIF_MSG 1
+#endif
+
#ifndef HAVE_NETIF_MSG
#define HAVE_NETIF_MSG 1
enum {
--- a/Embedded/src/GbE/iegbe_main.c
+++ b/Embedded/src/GbE/iegbe_main.c
@@ -159,9 +159,9 @@ static void iegbe_smartspeed(struct iegb
static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
struct sk_buff *skb);
-static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
-static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
-static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static bool iegbe_vlan_used(struct iegbe_adapter *adapter);
+static int iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
+static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
static int iegbe_notify_reboot(struct notifier_block *,
@@ -324,8 +324,8 @@ static void iegbe_update_mng_vlan(struct
struct net_device *netdev = adapter->netdev;
u16 vid = hw->mng_cookie.vlan_id;
u16 old_vid = adapter->mng_vlan_id;
- if (adapter->vlgrp) {
- if (!vlan_group_get_device(adapter->vlgrp, vid)) {
+ if (iegbe_vlan_used(adapter)) {
+ if (!test_bit(old_vid, adapter->active_vlans)) {
if (hw->mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
iegbe_vlan_rx_add_vid(netdev, vid);
@@ -335,7 +335,7 @@ static void iegbe_update_mng_vlan(struct
if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
(vid != old_vid) &&
- !vlan_group_get_device(adapter->vlgrp, old_vid))
+ !test_bit(old_vid, adapter->active_vlans))
iegbe_vlan_rx_kill_vid(netdev, old_vid);
} else
adapter->mng_vlan_id = vid;
@@ -736,7 +736,6 @@ static const struct net_device_ops iegbe
.ndo_do_ioctl = iegbe_ioctl,
.ndo_validate_addr = eth_validate_addr,
- .ndo_vlan_rx_register = iegbe_vlan_rx_register,
.ndo_vlan_rx_add_vid = iegbe_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -767,7 +766,6 @@ static int __devinit iegbe_probe(struct
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
int bars;
- DECLARE_MAC_BUF(mac);
bars = pci_select_bars(pdev, IORESOURCE_MEM);
err = pci_enable_device(pdev);
@@ -1247,8 +1245,7 @@ static int iegbe_close(struct net_device
if ((hw->mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
- !(adapter->vlgrp &&
- vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
+ !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
}
return 0;
@@ -2163,11 +2160,13 @@ static void iegbe_set_rx_mode(struct net
struct iegbe_hw *hw = &adapter->hw;
struct netdev_hw_addr *ha;
bool use_uc = false;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
struct dev_addr_list *mc_ptr;
- u32 rctl;
u32 hash_value;
- int i, rar_entries = E1000_RAR_ENTRIES;
int mta_reg_count = E1000_NUM_MTA_REGISTERS;
+#endif
+ u32 rctl;
+ int i, rar_entries = E1000_RAR_ENTRIES;
/* reserve RAR[14] for LAA over-write work-around */
if (hw->mac_type == iegbe_82571)
@@ -2220,6 +2219,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
WARN_ON(i == rar_entries);
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
mc_ptr = netdev->mc_list;
for (; i < rar_entries; i++) {
@@ -2247,6 +2247,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
iegbe_mta_set(hw, hash_value);
}
+#endif
if (hw->mac_type == iegbe_82542_rev2_0)
iegbe_leave_82542_rst(adapter);
@@ -2821,14 +2822,14 @@ static int iegbe_tx_map(struct iegbe_ada
* Avoid terminating buffers within evenly-aligned
* dwords. */
if(unlikely(adapter->pcix_82544 &&
- !((unsigned long)(frag->page+offset+size-1) & 4) &&
+ !((unsigned long)(frag->page.p+offset+size-1) & 4) &&
size > 4))
size -= 4;
buffer_info->length = size;
buffer_info->dma =
pci_map_page(adapter->pdev,
- frag->page,
+ frag->page.p,
offset,
size,
PCI_DMA_TODEVICE);
@@ -3131,7 +3132,7 @@ static int iegbe_xmit_frame(struct sk_bu
}
}
- if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ if (unlikely(iegbe_vlan_used(adapter) && vlan_tx_tag_present(skb))) {
tx_flags |= E1000_TX_FLAGS_VLAN;
tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
}
@@ -3832,10 +3833,12 @@ static bool iegbe_clean_rx_irq(struct ie
skb->protocol = eth_type_trans(skb, netdev);
- if (unlikely(adapter->vlgrp &&
+ if (unlikely(iegbe_vlan_used(adapter) &&
(status & E1000_RXD_STAT_VP))) {
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
- le16_to_cpu(rx_desc->special));
+ u16 vid;
+
+ vid = le16_to_cpu(rx_desc->special);
+ __vlan_hwaccel_put_tag(skb, vid);
} else {
netif_receive_skb(skb);
}
@@ -3986,9 +3989,10 @@ copydone:
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
adapter->rx_hdr_split++;
- if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
- le16_to_cpu(rx_desc->wb.middle.vlan));
+ if(unlikely(iegbe_vlan_used(adapter) && (staterr & E1000_RXD_STAT_VP))) {
+ u16 vid;
+ vid = le16_to_cpu(rx_desc->wb.middle.vlan);
+ __vlan_hwaccel_put_tag(skb, vid);
} else {
netif_receive_skb(skb);
}
@@ -4496,17 +4500,25 @@ iegbe_io_write(struct iegbe_hw *hw, unsi
outl(value, port);
}
-static void iegbe_vlan_rx_register(struct net_device *netdev,
- struct vlan_group *grp)
+static bool iegbe_vlan_used(struct iegbe_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ return true;
+
+ return false;
+}
+
+static void iegbe_vlan_mode(struct net_device *netdev, bool vlan_on)
{
struct iegbe_adapter *adapter = netdev_priv(netdev);
uint32_t ctrl, rctl;
if (!test_bit(__E1000_DOWN, &adapter->flags))
iegbe_irq_disable(adapter);
- adapter->vlgrp = grp;
- if(grp) {
+ if(vlan_on) {
/* enable VLAN tag insert/strip */
ctrl = E1000_READ_REG(&adapter->hw, CTRL);
ctrl |= E1000_CTRL_VME;
@@ -4538,30 +4550,37 @@ static void iegbe_vlan_rx_register(struc
iegbe_irq_enable(adapter);
}
-static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+static int iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
{
struct iegbe_adapter *adapter = netdev_priv(netdev);
uint32_t vfta, index;
if((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
(vid == adapter->mng_vlan_id)) {
- return;
+ return 0;
}
+
+ if (!iegbe_vlan_used(adapter))
+ iegbe_vlan_mode(netdev, true);
+
/* add VID to filter table */
index = (vid >> 0x5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
vfta |= (0x1 << (vid & 0x1F));
iegbe_write_vfta(&adapter->hw, index, vfta);
+
+ set_bit(vid, adapter->active_vlans);
+
+ return 0;
}
-static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
{
struct iegbe_adapter *adapter = netdev_priv(netdev);
u32 vfta, index;
if (!test_bit(__E1000_DOWN, &adapter->flags))
iegbe_irq_disable(adapter);
- vlan_group_set_device(adapter->vlgrp, vid, NULL);
if (!test_bit(__E1000_DOWN, &adapter->flags))
iegbe_irq_enable(adapter);
@@ -4570,21 +4589,26 @@ static void iegbe_vlan_rx_kill_vid(struc
vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
vfta &= ~(0x1 << (vid & 0x1F));
iegbe_write_vfta(&adapter->hw, index, vfta);
+
+ clear_bit(vid, adapter->active_vlans);
+
+ if (!iegbe_vlan_used(adapter))
+ iegbe_vlan_mode(netdev, false);
+
+ return 0;
}
static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
{
- iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
-
- if (adapter->vlgrp) {
u16 vid;
- for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
- if (!vlan_group_get_device(adapter->vlgrp, vid))
- continue;
+
+ if (!iegbe_vlan_used(adapter))
+ return;
+
+ iegbe_vlan_mode(adapter->netdev, true);
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
iegbe_vlan_rx_add_vid(adapter->netdev, vid);
}
- }
-}
int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
@@ -4864,10 +4888,11 @@ iegbe_resume(struct pci_dev *pdev)
default:
break;
}
-#endif
return 0x0;
}
+#endif
+
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
--- a/Embedded/src/GbE/iegbe_ethtool.c
+++ b/Embedded/src/GbE/iegbe_ethtool.c
@@ -327,6 +327,7 @@ iegbe_set_pauseparam(struct net_device *
return 0;
}
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
static uint32_t
iegbe_get_rx_csum(struct net_device *netdev)
{
@@ -392,6 +393,7 @@ iegbe_set_tso(struct net_device *netdev,
return 0;
}
#endif /* NETIF_F_TSO */
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
static uint32_t
iegbe_get_msglevel(struct net_device *netdev)
@@ -807,6 +809,7 @@ err_setup_rx:
E1000_82542_##R : E1000_##R; \
return 1; } }
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
static int
iegbe_reg_test(struct iegbe_adapter *adapter, uint64_t *data)
{
@@ -1710,6 +1713,7 @@ iegbe_diag_test(struct net_device *netde
}
msleep_interruptible(0xfa0);
}
+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
static void
iegbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
@@ -1812,6 +1816,7 @@ iegbe_set_wol(struct net_device *netdev,
/* bit defines for adapter->led_status */
#define E1000_LED_ON 0
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
static void
iegbe_led_blink_callback(unsigned long data)
{
@@ -1864,6 +1869,7 @@ iegbe_phys_id(struct net_device *netdev,
return 0;
}
+#endif
static int
iegbe_nway_reset(struct net_device *netdev)
@@ -1876,11 +1882,13 @@ iegbe_nway_reset(struct net_device *netd
return 0;
}
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
static int
iegbe_get_stats_count(struct net_device *netdev)
{
return E1000_STATS_LEN;
}
+#endif
static void
iegbe_get_ethtool_stats(struct net_device *netdev,
@@ -1936,6 +1944,8 @@ struct ethtool_ops iegbe_ethtool_ops = {
.set_ringparam = iegbe_set_ringparam,
.get_pauseparam = iegbe_get_pauseparam,
.set_pauseparam = iegbe_set_pauseparam,
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
.get_rx_csum = iegbe_get_rx_csum,
.set_rx_csum = iegbe_set_rx_csum,
.get_tx_csum = iegbe_get_tx_csum,
@@ -1946,11 +1956,13 @@ struct ethtool_ops iegbe_ethtool_ops = {
.get_tso = ethtool_op_get_tso,
.set_tso = iegbe_set_tso,
#endif
+
.self_test_count = iegbe_diag_test_count,
.self_test = iegbe_diag_test,
- .get_strings = iegbe_get_strings,
.phys_id = iegbe_phys_id,
.get_stats_count = iegbe_get_stats_count,
+#endif
+ .get_strings = iegbe_get_strings,
.get_ethtool_stats = iegbe_get_ethtool_stats,
};
--- a/Embedded/src/GbE/gcu_main.c
+++ b/Embedded/src/GbE/gcu_main.c
@@ -93,7 +93,7 @@ static struct pci_driver gcu_driver = {
};
static struct gcu_adapter *global_adapter = 0;
-static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(global_adapter_spinlock);
static unsigned long g_intflags = 0;
MODULE_AUTHOR("Intel(R) Corporation");
--- a/Embedded/src/GbE/iegbe.h
+++ b/Embedded/src/GbE/iegbe.h
@@ -257,7 +257,7 @@ struct iegbe_adapter {
struct timer_list tx_fifo_stall_timer;
struct timer_list watchdog_timer;
struct timer_list phy_info_timer;
- struct vlan_group *vlgrp;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
uint16_t mng_vlan_id;
uint32_t bd_number;
uint32_t rx_buffer_len;

41
package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch
Unescape View File

@ -1,41 +0,0 @@
--- a/Embedded/src/CAN/can_main.c
+++ b/Embedded/src/CAN/can_main.c
@@ -72,6 +72,7 @@
#include "can_main.h"
#include "can_ioctl.h"
#include <linux/fs.h>
+#include <linux/module.h>
MODULE_AUTHOR("Intel(R) Corporation");
@@ -110,7 +111,7 @@ struct file_operations file_ops = {
.owner = THIS_MODULE,
.read = can_read,
.write = can_write,
- .ioctl = can_dev_io,
+ .unlocked_ioctl = can_dev_io,
.open = can_open,
.release = can_release
};
@@ -594,8 +595,7 @@ int icp_can_reset(can_os_t *can_os)
/*****************************************************************************
* Device IO control function. Used by user apps to configure CAN device.
*****************************************************************************/
-int can_dev_io(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+long can_dev_io(struct file *filp, unsigned int cmd, unsigned long arg)
{
can_os_t *can_os;
unsigned int err=0;
--- a/Embedded/src/CAN/can_main.h
+++ b/Embedded/src/CAN/can_main.h
@@ -157,8 +157,7 @@ ssize_t can_write(
int icp_can_reset(
can_os_t *can_os);
-int can_dev_io(
- struct inode *inode,
+long can_dev_io(
struct file *filp,
unsigned int cmd,
unsigned long arg);

33
package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch
Unescape View File

@ -1,33 +0,0 @@
--- a/Embedded/src/GPIO/gpio.h
+++ b/Embedded/src/GPIO/gpio.h
@@ -121,8 +121,7 @@ int gpio_init(void);
void gpio_close(void);
int gpio_open(struct inode *inode, struct file *filp);
int gpio_release(struct inode *inode, struct file *filp);
-int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg);
+long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
// private driver functions
int gpio_getpininfo(int Signal, char *pBuff);
@@ -134,7 +133,7 @@ struct file_operations file_ops =
.owner = THIS_MODULE,
.open = gpio_open,
.release = gpio_release,
- .ioctl = gpio_ioctl,
+ .unlocked_ioctl = gpio_ioctl,
};
#endif
--- a/Embedded/src/GPIO/gpio_ref.c
+++ b/Embedded/src/GPIO/gpio_ref.c
@@ -251,8 +251,7 @@ int gpio_release(struct inode *inode, st
0 => success
< 0 => error
******************************************************************************/
-int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
gpio_ioctl_t Info;
u_int bitstr = 0;

31
package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch
Unescape View File

@ -1,31 +0,0 @@
--- a/Embedded/src/WDT/iwdt.c
+++ b/Embedded/src/WDT/iwdt.c
@@ -217,8 +217,7 @@ static int wdt_open(struct inode *inode,
static int wdt_release(struct inode *inode, struct file *file);
static ssize_t wdt_write(struct file *file, const char *data,
size_t count, loff_t * pos);
-static int wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
static irqreturn_t wdt_isr(int irq, void *dev_id);
static void __exit wdt_cleanup(void);
static int __init wdt_init(void);
@@ -243,7 +242,7 @@ static struct pci_device_id lpc_pci_tbl[
static struct file_operations wdt_fops = {
owner: THIS_MODULE,
write: wdt_write,
- ioctl: wdt_ioctl,
+ unlocked_ioctl: wdt_ioctl,
open: wdt_open,
release: wdt_release,
};
@@ -1201,8 +1200,7 @@ char *wdt_get_ioctl_string(unsigned int
* Return Value: 0 - successful, negative value - failed.
* Description: This function is used to provide IO interface.
*/
-static int wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
u8 mode=0, scale=0, int_type=0;
u32 u_margin=0, dcount=0;

33
package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch
Unescape View File

@ -1,33 +0,0 @@
--- a/Embedded/src/1588/1588.c
+++ b/Embedded/src/1588/1588.c
@@ -664,8 +664,7 @@ irqreturn_t timesync_isr(int irq, void *
0 => success
< 0 => error
******************************************************************************/
-int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
wait_queue_head_t *event = NULL;
unsigned int bytes_ret = 0;
--- a/Embedded/src/1588/1588.h
+++ b/Embedded/src/1588/1588.h
@@ -121,8 +121,7 @@ MODULE_DEVICE_TABLE(pci, pci_ids);
// Linux functions
int timesync_open(struct inode *inode, struct file *filp);
int timesync_release(struct inode *inode, struct file *filp);
-int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg);
+long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
void timesync_close(void);
int pci_suspend(struct pci_dev *dev, pm_message_t state);
int pci_resume(struct pci_dev *dev);
@@ -142,7 +141,7 @@ struct file_operations file_ops =
.owner = THIS_MODULE,
.open = timesync_open,
.release = timesync_release,
- .ioctl = timesync_ioctl,
+ .unlocked_ioctl = timesync_ioctl,
};
// Linux pci operations
Write Preview
Loading…
Cancel
Save