brcm47xx: deactivate early printk support

This breaks some devices where the serial console is not at port 0 but
somewhere else.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39060
master
Hauke Mehrtens 11 years ago
parent 952db22551
commit 36197755dc
  1. 3
      target/linux/brcm47xx/config-3.10
  2. 47
      target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch
  3. 2
      target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch
  4. 4
      target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch

@ -49,8 +49,7 @@ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_8250=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y

@ -51,50 +51,3 @@ Date: Thu Sep 19 22:48:35 2013 +0200
}
void __init prom_free_prom_memory(void)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -123,6 +123,28 @@ static int bcm47xx_get_invariants(struct
return 0;
}
+/*
+ * This is the second serial on the chip common core, it is at this position
+ * for sb (ssb) and ai (bcma) bus.
+ */
+#define BCM47XX_SERIAL1_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART1_DATA)
+
+static void __init bcm47xx_swap_serial_ssb(struct ssb_mipscore *mcore)
+{
+ struct ssb_serial_port port;
+
+ printk(KERN_INFO "Swapping serial ports\n");
+
+ setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL1_ADDR), 0, 0);
+
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+
+ printk(KERN_INFO "Serial port were Swapped\n");
+}
+
static void __init bcm47xx_register_ssb(void)
{
int err;
@@ -142,14 +164,7 @@ static void __init bcm47xx_register_ssb(
mcore = &bcm47xx_bus.ssb.mipscore;
if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
if (strstr(buf, "console=ttyS1")) {
- struct ssb_serial_port port;
-
- printk(KERN_DEBUG "Swapping serial ports!\n");
- /* swap serial ports */
- memcpy(&port, &mcore->serial_ports[0], sizeof(port));
- memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
- sizeof(port));
- memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ bcm47xx_swap_serial_ssb(mcore);
}
}
}

@ -8,7 +8,7 @@
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
#include <bcm47xx_board.h>
@@ -214,6 +215,15 @@ static void __init bcm47xx_register_bcma
@@ -199,6 +200,15 @@ static void __init bcm47xx_register_bcma
panic("Failed to initialize BCMA bus (err %d)", err);
bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);

@ -8,7 +8,7 @@
#include <asm/bootinfo.h>
#include <asm/prom.h>
#include <asm/reboot.h>
@@ -254,6 +255,33 @@ void __init plat_mem_setup(void)
@@ -239,6 +240,33 @@ void __init plat_mem_setup(void)
mips_set_machine_name(bcm47xx_board_get_name());
}
@ -42,7 +42,7 @@
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -268,6 +296,8 @@ static int __init bcm47xx_register_bus_c
@@ -253,6 +281,8 @@ static int __init bcm47xx_register_bus_c
break;
#endif
}

Loading…
Cancel
Save