hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ipq806x: fix and cleanup dts for NEC WG2600HP

Browse Source 
This commit fixes and cleanups qcom-ipq8064-wg2600hp.dts to improve the
support for WG2600HP.

- Use dt label in qcom-ipq8064.dtsi:

  - gmac1
  - gmac2
  - gsbi4
    - gsbi4_serial
  - gsbi5
  - hs_phy_0
  - ss_phy_0
  - usb3_0
  - usb3_1
  - pcie0
  - pcie1
  - qcom_pinmux

- Fix wrong pcie reset (perst) gpios

  - drop reset-gpio and use perst-gpios in qcom-ipq8064.dtsi

- Remove unnecessary dt label from device dts

  - flash
  - phy0, phy4

- Rename spi-nor node to "flash" from "m25p80"

- Fix qca,ar8327-initvals

  - use oem settings

    - fix: PAD0_MODE, PAD6_MODE
    - drop: PAD5_MODE (unnecessary)

- Move mtd partitions under partitions (fixed-partitions) node

- Specify "firmware" partition format

  - WG2600HP uses uImage format (denx,uimage)

- Change failsafe status LED to power_red

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
master
INAGAKI Hiroshi 6 years ago committed by Christian Lamparter
parent 3850b41f01
commit 3198ec5b9d
1 changed files with 286 additions and 290 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 576
      target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts

576
target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
Unescape View File

@ -26,7 +26,7 @@
mdio-gpio0 = &mdio0;
led-boot = &power_green;
led-failsafe = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-upgrade = &power_green;
};
@ -36,256 +36,6 @@
};
soc {
pinmux@800000 {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio24", "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
"gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux {
pins = "gpio22";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
/*
* The i2c device on gsbi4 should not be enabled.
* On ipq806x designs gsbi4 i2c is meant for exclusive
* RPM usage. Turning this on in kernel manifests as
* i2c failure for the RPM.
*/
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x10000>;
};
PRODUCTDATA: PRODUCTDATA@2b0000 {
label = "PRODUCTDATA";
reg = <0x2b0000 0x30000>;
read-only;
};
ART@2e0000 {
label = "ART";
reg = <0x2e0000 0x40000>;
read-only;
};
TP@320000 {
label = "TP";
reg = <0x320000 0x40000>;
read-only;
};
TINY@360000 {
label = "TINY";
reg = <0x360000 0x500000>;
read-only;
};
firmware@860000 {
label = "firmware";
reg = <0x860000 0x17a0000>;
};
};
};
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
};
usb30@0 {
status = "ok";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
};
pcie0: pci@1b500000 {
status = "ok";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
force_gen1 = <1>;
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
@ -294,52 +44,22 @@
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x00004 0x06000000 /* PAD0_MODE */
0x0000c 0x00080080 /* PAD6_MODE */
0x000e4 0x0006a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
0x0007c 0x0000004e /* PORT0_STATUS */
0x00094 0x0000004e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
ethernet-phy@4 {
reg = <4>;
};
};
gmac1: ethernet@37200000 {
status = "ok";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&PRODUCTDATA 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
gmac2: ethernet@37400000 {
status = "ok";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&PRODUCTDATA 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
gpio-keys {
@ -384,7 +104,7 @@
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
};
power_red {
power_red: power_red {
label = "wg2600hp:red:power";
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
};
@ -442,5 +162,281 @@
};
&adm_dma {
status = "ok";
status = "okay";
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&PRODUCTDATA 6>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mtd-mac-address = <&PRODUCTDATA 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gsbi4 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C_UART>;
};
&gsbi4_serial {
status = "okay";
};
&gsbi5 {
status = "okay";
qcom,mode = <GSBI_PROT_SPI>;
spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x20000>;
read-only;
};
MIBIB@20000 {
label = "MIBIB";
reg = <0x20000 0x20000>;
read-only;
};
SBL2@40000 {
label = "SBL2";
reg = <0x40000 0x40000>;
read-only;
};
SBL3@80000 {
label = "SBL3";
reg = <0x80000 0x80000>;
read-only;
};
DDRCONFIG@100000 {
label = "DDRCONFIG";
reg = <0x100000 0x10000>;
read-only;
};
SSD@110000 {
label = "SSD";
reg = <0x110000 0x10000>;
read-only;
};
TZ@120000 {
label = "TZ";
reg = <0x120000 0x80000>;
read-only;
};
RPM@1a0000 {
label = "RPM";
reg = <0x1a0000 0x80000>;
read-only;
};
APPSBL@220000 {
label = "APPSBL";
reg = <0x220000 0x80000>;
read-only;
};
APPSBLENV@2a0000 {
label = "APPSBLENV";
reg = <0x2a0000 0x10000>;
};
PRODUCTDATA: PRODUCTDATA@2b0000 {
label = "PRODUCTDATA";
reg = <0x2b0000 0x30000>;
read-only;
};
ART@2e0000 {
label = "ART";
reg = <0x2e0000 0x40000>;
read-only;
};
TP@320000 {
label = "TP";
reg = <0x320000 0x40000>;
read-only;
};
TINY@360000 {
label = "TINY";
reg = <0x360000 0x500000>;
read-only;
};
firmware@860000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x860000 0x17a0000>;
};
};
};
};
};
&hs_phy_0 { /* USB3 port 0 HS phy */
status = "okay";
};
&ss_phy_0 { /* USB3 port 0 SS phy */
status = "okay";
};
&hs_phy_1 { /* USB3 port 1 HS phy */
status = "okay";
};
&ss_phy_1 { /* USB3 port 1 SS phy */
status = "okay";
};
&usb3_0 {
status = "okay";
pinctrl-0 = <&usb_pwr_en_pins>;
pinctrl-names = "default";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
force_gen1 = <1>;
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio16", "gpio54", "gpio24", "gpio25";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
i2c4_pins: i2c4_pinmux {
mux {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
"gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
"gpio64", "gpio65";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
mdio0_pins: mdio0_pins {
mux {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
};
rgmii2_pins: rgmii2_pins {
mux {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
function = "rgmii2";
drive-strength = <8>;
bias-disable;
};
};
usb_pwr_en_pins: usb_pwr_en_pins {
mux {
pins = "gpio22";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
output-high;
};
};
};

Write Preview
Loading…
Cancel
Save