ar71xx: add support for GL.iNet GL-AR750S

This patch adds supports for GL-AR750S.

Specification:
- SOC: QCA9563 (775MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 2x 1Gbps LAN + 1x 1Gbps WAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Button: 1x switch button, 1x reset button
- LED: 3x LEDS (green)

Flash instruction:
Apply factory image via web-gui.

Signed-off-by: Luo chongjun <luochongjun@gl-inet.com>
master
Luo chongjun 6 years ago committed by John Crispin
parent 27eab4fa57
commit 312d7a4a5a
  1. 4
      target/linux/ar71xx/base-files/etc/board.d/01_leds
  2. 4
      target/linux/ar71xx/base-files/etc/board.d/02_network
  3. 1
      target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
  4. 3
      target/linux/ar71xx/base-files/lib/ar71xx.sh
  5. 1
      target/linux/ar71xx/base-files/lib/upgrade/platform.sh
  6. 1
      target/linux/ar71xx/config-4.9
  7. 11
      target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
  8. 1
      target/linux/ar71xx/files/arch/mips/ath79/Makefile
  9. 193
      target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c
  10. 1
      target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
  11. 1
      target/linux/ar71xx/generic/config-default
  12. 13
      target/linux/ar71xx/image/generic.mk

@ -385,6 +385,10 @@ gl-ar750)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt"
;;
gl-ar750s)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
;;
gl-mifi)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"

@ -433,6 +433,10 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan"
;;
gl-ar750s)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
;;
jwap230)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \

@ -99,6 +99,7 @@ case "$FIRMWARE" in
ath10kcal_extract "caldata" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
gl-ar750s|\
gl-ar750|\
tl-wpa8630)
ath10kcal_extract "art" 20480 2116

@ -727,6 +727,9 @@ ar71xx_board_detect() {
*"GL-AR750")
name="gl-ar750"
;;
*"GL-AR750S")
name="gl-ar750s"
;;
*"GL-CONNECT INET v1")
name="gl-inet"

@ -260,6 +260,7 @@ platform_check_image() {
gl-ar300m|\
gl-ar300|\
gl-ar750|\
gl-ar750s|\
gl-domino|\
gl-mifi|\
gl-usb150|\

@ -120,6 +120,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
# CONFIG_ATH79_MACH_GL_AR750 is not set
# CONFIG_ATH79_MACH_GL_AR750S is not set
# CONFIG_ATH79_MACH_GL_DOMINO is not set
# CONFIG_ATH79_MACH_GL_INET is not set
# CONFIG_ATH79_MACH_GL_MIFI is not set

@ -814,6 +814,17 @@ config ATH79_MACH_GL_AR750
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_GL_AR750S
bool "GL.iNet GL-AR750S support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_GL_DOMINO
bool "DOMINO support"
select SOC_AR933X

@ -130,6 +130,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o
obj-$(CONFIG_ATH79_MACH_GL_AR750S) += mach-gl-ar750s.o
obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o

@ -0,0 +1,193 @@
/*
* GL.iNet GL-AR750S board support
*
* Copyright (C) 2018 luochongjun <luochongjun@gl-inet.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/platform_data/phy-at803x.h>
#include <linux/ar8216_platform.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "dev-usb.h"
#include "machtypes.h"
#define GL_AR750S_KEYS_POLL_INTERVAL 20
#define GL_AR750S_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750S_KEYS_POLL_INTERVAL)
#define GL_AR750S_GPIO_LED_WLAN2G 19
#define GL_AR750S_GPIO_LED_WLAN5G 20
#define GL_AR750S_GPIO_LED_POWER 1
#define GL_AR750S_GPIO_USB_POWER 7
#define GL_AR750S_GPIO_BTN_RESET 2
#define GL_AR750S_GPIO_BTN_RIGHT 8
#define GL_AR750S_MAC0_OFFSET 0x0000
#define GL_AR750S_WMAC_CALDATA_OFFSET 0x1000
#define GL_AR750S_PCI_CALDATA_OFFSET 0x5000
#define GL_AR750S_GPIO_I2C_SDA 5
#define GL_AR750S_GPIO_I2C_SCL 21
static struct spi_board_info gl_ar750s_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.platform_data = NULL,
},
};
static struct ath79_spi_platform_data gl_ar750s_spi_data = {
.bus_num = 0,
.num_chipselect = 2,
};
static struct gpio_led gl_ar750s_leds_gpio[] __initdata = {
{
.name = "gl-ar750s:green:power",
.gpio = GL_AR750S_GPIO_LED_POWER,
.default_state = LEDS_GPIO_DEFSTATE_KEEP,
.active_low = 1,
},{
.name = "gl-ar750s:green:usbpower",
.gpio = GL_AR750S_GPIO_USB_POWER,
.active_low = 1,
},{
.name = "gl-ar750s:green:wlan2g",
.gpio = GL_AR750S_GPIO_LED_WLAN2G,
.active_low = 1,
},{
.name = "gl-ar750s:green:wlan5g",
.gpio = GL_AR750S_GPIO_LED_WLAN5G,
.active_low = 0,
}
};
static struct gpio_keys_button gl_ar750s_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL,
.gpio = GL_AR750S_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "right",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL,
.gpio = GL_AR750S_GPIO_BTN_RIGHT,
.active_low = 1,
},
};
static struct i2c_gpio_platform_data gl_ar750s_i2c_gpio_data = {
.sda_pin = GL_AR750S_GPIO_I2C_SDA,
.scl_pin = GL_AR750S_GPIO_I2C_SCL,
};
static struct platform_device gl_ar750s_i2c_gpio_device = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &gl_ar750s_i2c_gpio_data,
}
};
static struct ar8327_pad_cfg gl_ar750s_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
static struct ar8327_platform_data gl_ar750s_ar8327_data = {
.pad0_cfg = &gl_ar750s_ar8327_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info gl_ar750s_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &gl_ar750s_ar8327_data,
},
};
static void __init gl_ar750s_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000);
ath79_register_spi(&gl_ar750s_spi_data, gl_ar750s_spi_info, 1);
ath79_init_mac(ath79_eth0_data.mac_addr,
eeprom + GL_AR750S_MAC0_OFFSET, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = BIT(0);
mdiobus_register_board_info(gl_ar750s_mdio0_info,
ARRAY_SIZE(gl_ar750s_mdio0_info));
ath79_register_mdio(0, 0x00);
ath79_register_eth(0);
ath79_register_usb();
ath79_register_wmac(eeprom + GL_AR750S_WMAC_CALDATA_OFFSET, NULL);
ap91_pci_init(eeprom + GL_AR750S_PCI_CALDATA_OFFSET, NULL);
platform_device_register(&gl_ar750s_i2c_gpio_device);
ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750s_leds_gpio),
gl_ar750s_leds_gpio);
ath79_register_gpio_keys_polled(-1, GL_AR750S_KEYS_POLL_INTERVAL,
ARRAY_SIZE(gl_ar750s_gpio_keys),
gl_ar750s_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_GL_AR750S, "GL-AR750S", "GL-AR750S",
gl_ar750s_setup);

@ -125,6 +125,7 @@ enum ath79_mach_type {
ATH79_MACH_GL_AR300, /* GL-AR300 */
ATH79_MACH_GL_AR300M, /* GL-AR300M */
ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */
ATH79_MACH_GL_AR750S, /* GL.iNet GL-AR750S */
ATH79_MACH_GL_DOMINO, /* Domino */
ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
ATH79_MACH_GL_MIFI, /* GL-MIFI support */

@ -93,6 +93,7 @@ CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
CONFIG_ATH79_MACH_GL_AR300M=y
CONFIG_ATH79_MACH_GL_AR750=y
CONFIG_ATH79_MACH_GL_AR750S=y
CONFIG_ATH79_MACH_GL_DOMINO=y
CONFIG_ATH79_MACH_GL_INET=y
CONFIG_ATH79_MACH_GL_MIFI=y

@ -461,6 +461,19 @@ define Device/gl-ar750
endef
TARGET_DEVICES += gl-ar750
define Device/gl-ar750s
DEVICE_TITLE := GL.iNet GL-AR750S
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
kmod-usb2 kmod-usb-storage
BOARDNAME := GL-AR750S
SUPPORTED_DEVICES := gl-ar750s
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += gl-ar750s
define Device/gl-domino
DEVICE_TITLE := GL.iNet Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2

Loading…
Cancel
Save