ath79: add support for EnGenius ECB1750

Specification:

- Qualcomm Atheros SoC QCA9558
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100/1000 Mbps Ethernet
- 3T3R 2.4 GHz (QCA9558 WMAC)
- 3T3R 5.8 Ghz (QCA9880-BR4A, Senao PCE4553AH)

https://fccid.io/A8J-ECB1750

Tested and working:

- lan, wireless, leds, sysupgrade (tftp)

Flash instructions:

1.) tftp recovery

- use a 1GbE switch or direct attached 1GbE link
- setup client ip address 192.168.1.10 and start tftpd
- save "openwrt-ath79-generic-engenius_ecb1750-initramfs-kernel.bin" as "ap.bin" in tfpd root directory
- plugin powercord and hold reset button 10secs.. "ap.bin" will be downloaded and executed
- afterwards login via ssh and do a sysuprade

2.) oem webinterface factory install (not tested)

Use normal webinterface upgrade page und select "openwrt-ath79-generic-engenius_ecb1750-squashfs-factory.bin".

3.) oem webinterface command injection

OEM Firmware already running OpenWrt (Attitude Adjustment 12.09).
Use OEM webinterface and command injection. See wiki for details.

https://openwrt.org/toh/engenius/engenius_ecb1750_1

Signed-off-by: sven friedmann <sf.openwrt@okay.ms>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[use interrupt-driven "gpio-keys" binding]
master
sven friedmann 6 years ago committed by Christian Lamparter
parent 819e7946b0
commit 30dcbc741d
  1. 1
      package/boot/uboot-envtools/files/ath79
  2. 3
      target/linux/ath79/base-files/etc/board.d/01_leds
  3. 4
      target/linux/ath79/base-files/etc/board.d/02_network
  4. 4
      target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
  5. 4
      target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
  6. 144
      target/linux/ath79/dts/qca9558_engenius_ecb1750.dts
  7. 12
      target/linux/ath79/image/generic.mk

@ -17,6 +17,7 @@ buffalo,wzr-hp-ag300h)
ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
;;
buffalo,bhr-4grv2|\
engenius,ecb1750|\
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor|\
librerouter,librerouter-v1|\

@ -58,6 +58,9 @@ comfast,cf-e5)
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;
engenius,ecb1750)
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
;;
engenius,ews511ap)
ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth1"

@ -13,6 +13,7 @@ ath79_setup_interfaces()
devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i|\
engenius,ecb1750|\
glinet,ar300m-lite|\
netgear,ex6400|\
netgear,ex7300|\
@ -291,6 +292,9 @@ ath79_setup_macs()
elecom,wrc-300ghbk2-i)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
;;
engenius,ecb1750)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr|\

@ -109,6 +109,10 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
;;
engenius,ecb1750)
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr|\

@ -102,6 +102,10 @@ case "$FIRMWARE" in
elecom,wrc-1750ghbk2-i)
ath10kcal_extract "ART" 20480 2116
;;
engenius,ecb1750)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
;;
engenius,epg5000|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)

@ -0,0 +1,144 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "engenius,ecb1750", "qca,qca9557";
model = "EnGenius ECB1750";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &power_orange;
led-failsafe = &power_orange;
led-running = &power_orange;
led-upgrade = &power_orange;
};
leds {
compatible = "gpio-leds";
power_orange: power_orange {
label = "ecb1750:orange:power";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "ecb1750:blue:wlan2g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "ecb1750:blue:wlan5g";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "ecb1750:blue:lan";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0xf50000>;
};
partition@fa0000 {
label = "userconfig";
reg = <0xfa0000 0x050000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&mdio0 {
status = "okay";
phy5: ethernet-phy@5 {
reg = <5>;
at803x-disable-smarteee;
};
};
&eth0 {
status = "okay";
pll-data = <0x9a000000 0x80000101 0x80001313>;
phy-handle = <&phy5>;
phy-mode = "rgmii";
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxd-delay = <3>;
rxdv-delay = <3>;
};
};

@ -302,6 +302,18 @@ define Device/embeddedwireless_dorin
endef
TARGET_DEVICES += embeddedwireless_dorin
define Device/engenius_ecb1750
ATH_SOC := qca9558
DEVICE_TITLE := EnGenius ECB1750
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
IMAGE_SIZE := 15680k
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
senao-header -r 0x101 -p 0x6d -t 2
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += engenius_ecb1750
define Device/engenius_epg5000
ATH_SOC := qca9558
DEVICE_TITLE := EnGenius EPG5000

Loading…
Cancel
Save