ramips: add support for Planex DB-WRT01

This patch add support for Planex DB-WRT01. DANBOARD route on
 the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
 DANBOARD is Cartoon character.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 46918
master
John Crispin 9 years ago
parent 06a180d027
commit 2efdc7c896
  1. 3
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 1
      target/linux/ramips/base-files/etc/board.d/02_network
  3. 1
      target/linux/ramips/base-files/etc/diag.sh
  4. 3
      target/linux/ramips/base-files/lib/ramips.sh
  5. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  6. 100
      target/linux/ramips/dts/DB-WRT01.dts
  7. 2
      target/linux/ramips/image/Makefile

@ -87,6 +87,9 @@ d105)
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
set_usb_led "$board:green:usb"
;;
db-wrt01)
ucidef_set_led_default "power" "power" "$board:orange:power" "1"
;;
dcs-930l-b1)
ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps"

@ -61,6 +61,7 @@ ramips_setup_interfaces()
;;
3g-6200n|\
ai-br100|\
db-wrt01|\
dir-300-b7|\
dir-320-b1|\
dir-610-a1|\

@ -94,6 +94,7 @@ get_status_led() {
y1s)
status_led="$board:blue:power"
;;
db-wrt01|\
esr-9753)
status_led="$board:orange:power"
;;

@ -97,6 +97,9 @@ ramips_board_detect() {
*"DAP-1350")
name="dap-1350"
;;
*"DB-WRT01")
name="db-wrt01"
;;
*"DCS-930")
name="dcs-930"
;;

@ -36,6 +36,7 @@ platform_check_image() {
cf-wr800n|\
d105|\
dap-1350|\
db-wrt01|\
dcs-930|\
dcs-930l-b1|\
dir-300-b1|\

@ -0,0 +1,100 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex DB-WRT01";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi refclk", "rgmii1";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "llllw";
};
gsw@10110000 {
ralink,port4 = "ephy";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pcie@10140000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "db-wrt01:orange:power";
gpios = <&gpio1 1 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
s1 {
label = "wps";
gpios = <&gpio0 2 1>;
linux,code = <0x211>;
};
};
};

@ -868,6 +868,7 @@ Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
na930_mtd_size=20971520
Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001)
Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1)
@ -901,6 +902,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WHR300HP2,$(1))
$(call Image/Build/Profile/WHR600D,$(1))
$(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/DB-WRT01,$(1))
$(call Image/Build/Profile/MZK-750DHP,$(1))
$(call Image/Build/Profile/NA930,$(1))
$(call Image/Build/Profile/OY-0001,$(1))

Loading…
Cancel
Save