Signed-off-by: Michaël Burtin <mburtin@gmail.com> SVN-Revision: 43173master
John Crispin
10 years ago
parent
b25b58a96a
commit
2c72ffc154
@ -0,0 +1,175 @@ |
||||
/*
|
||||
* NETGEAR WNR2000v4 board support |
||||
* |
||||
* Copytight (C) 2014 Michaël Burtin <mburtin@gmail.com> |
||||
* Copytight (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com> |
||||
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> |
||||
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> |
||||
* Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/mtd/mtd.h> |
||||
#include <linux/mtd/partitions.h> |
||||
#include <linux/platform_device.h> |
||||
|
||||
#include <asm/mach-ath79/ath79.h> |
||||
#include <asm/mach-ath79/ar71xx_regs.h> |
||||
|
||||
#include "common.h" |
||||
#include "dev-eth.h" |
||||
#include "dev-gpio-buttons.h" |
||||
#include "dev-leds-gpio.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-usb.h" |
||||
#include "dev-wmac.h" |
||||
#include "machtypes.h" |
||||
|
||||
/* AR9341 GPIOs */ |
||||
#define WNR2000V4_GPIO_LED_WAN_AMBER 22 |
||||
#define WNR2000V4_GPIO_LED_WAN_GREEN 17 |
||||
#define WNR2000V4_GPIO_LED_WPS 2 |
||||
#define WNR2000V4_GPIO_LED_WLAN 12 |
||||
#define WNR2000V4_GPIO_LED_LAN1 18 |
||||
#define WNR2000V4_GPIO_LED_LAN2 19 |
||||
#define WNR2000V4_GPIO_LED_LAN3 20 |
||||
#define WNR2000V4_GPIO_LED_LAN4 21 |
||||
#define STATUS_LED_GPIO 1 |
||||
#define WNR2000V4_GPIO_LED_PWR_GREEN 0 |
||||
|
||||
#define WNR2000V4_GPIO_BTN_WPS 3 |
||||
#define WNR2000V4_GPIO_BTN_RESET 4 |
||||
#define WNR2000V4_GPIO_BTN_WLAN 11 |
||||
|
||||
#define WNR2000V4_KEYS_POLL_INTERVAL 20 /* msecs */ |
||||
#define WNR2000V4_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V4_KEYS_POLL_INTERVAL) |
||||
|
||||
#define WNR2000V4_MAC0_OFFSET 0 |
||||
#define WNR2000V4_MAC1_OFFSET 6 |
||||
|
||||
static struct gpio_led wnr2000v4_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "wnr2000-v4:green:power", |
||||
.gpio = WNR2000V4_GPIO_LED_PWR_GREEN, |
||||
.active_low = 1, |
||||
.default_trigger = "default-on", |
||||
}, { |
||||
.name = "wnr2000-v4:green:wan", |
||||
.gpio = WNR2000V4_GPIO_LED_WAN_AMBER, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "wnr2000-v4:green:wps", |
||||
.gpio = WNR2000V4_GPIO_LED_WPS, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "wnr2000-v4:amber:status", |
||||
.gpio = STATUS_LED_GPIO, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "wnr2000-v4:blue:wlan", |
||||
.gpio = WNR2000V4_GPIO_LED_WLAN, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "wnr2000-v4:amber:lan1", |
||||
.gpio = WNR2000V4_GPIO_LED_LAN1, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "wnr2000-v4:amber:lan2", |
||||
.gpio = WNR2000V4_GPIO_LED_LAN2, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "wnr2000-v4:amber:lan3", |
||||
.gpio = WNR2000V4_GPIO_LED_LAN3, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "wnr2000-v4:amber:lan4", |
||||
.gpio = WNR2000V4_GPIO_LED_LAN4, |
||||
.active_low = 1, |
||||
} |
||||
}; |
||||
|
||||
static struct gpio_keys_button wnr2000v4_gpio_keys[] __initdata = { |
||||
{ |
||||
.desc = "WPS button", |
||||
.type = EV_KEY, |
||||
.code = KEY_WPS_BUTTON, |
||||
.debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = WNR2000V4_GPIO_BTN_WPS, |
||||
}, |
||||
{ |
||||
.desc = "Reset button", |
||||
.type = EV_KEY, |
||||
.code = KEY_RESTART, |
||||
.debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = WNR2000V4_GPIO_BTN_RESET, |
||||
}, |
||||
{ |
||||
.desc = "WLAN button", |
||||
.type = EV_KEY, |
||||
.code = KEY_WLAN, |
||||
.debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = WNR2000V4_GPIO_BTN_WLAN, |
||||
}, |
||||
}; |
||||
|
||||
static void __init wnr_common_setup(void) |
||||
{ |
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); |
||||
|
||||
ath79_register_m25p80(NULL); |
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | |
||||
AR934X_ETH_CFG_SW_PHY_SWAP); |
||||
|
||||
ath79_register_mdio(1, 0x0); |
||||
|
||||
/* LAN */ |
||||
ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0); |
||||
|
||||
/* GMAC1 is connected to the internal switch */ |
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
||||
ath79_register_eth(1); |
||||
|
||||
/* WAN */ |
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0); |
||||
|
||||
/* GMAC0 is connected to the PHY0 of the internal switch */ |
||||
ath79_switch_data.phy4_mii_en = 1; |
||||
ath79_switch_data.phy_poll_mask = BIT(4); |
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
||||
ath79_eth0_data.phy_mask = BIT(4); |
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; |
||||
|
||||
ath79_eth0_data.speed = SPEED_100; |
||||
ath79_eth0_data.duplex = DUPLEX_FULL; |
||||
|
||||
ath79_register_eth(0); |
||||
|
||||
/* WLAN */ |
||||
ath79_register_wmac(ee, art+WNR2000V4_MAC0_OFFSET); |
||||
|
||||
/* USB */ |
||||
ath79_register_usb(); |
||||
} |
||||
|
||||
static void __init wnr2000v4_setup(void) |
||||
{ |
||||
wnr_common_setup(); |
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v4_leds_gpio), |
||||
wnr2000v4_leds_gpio); |
||||
|
||||
ath79_register_gpio_keys_polled(-1, WNR2000V4_KEYS_POLL_INTERVAL, |
||||
ARRAY_SIZE(wnr2000v4_gpio_keys), |
||||
wnr2000v4_gpio_keys); |
||||
} |
||||
|
||||
MIPS_MACHINE(ATH79_MACH_WNR2000_V4, "WNR2000V4", "NETGEAR WNR2000 V4", wnr2000v4_setup); |
||||
@ -0,0 +1,39 @@ |
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -470,6 +470,16 @@ config ATH79_MACH_WNR2000_V3
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
|
||||
+config ATH79_MACH_WNR2000_V4
|
||||
+ bool "NETGEAR WNR2000 V4"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_OM2P
|
||||
bool "OpenMesh OM2P board support"
|
||||
select SOC_AR724X
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -113,6 +113,7 @@ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mac
|
||||
obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
|
||||
obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
|
||||
obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
|
||||
+obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
|
||||
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
|
||||
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
|
||||
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -138,6 +138,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
|
||||
ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
|
||||
ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
|
||||
+ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */
|
||||
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
|
||||
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
|
||||
ATH79_MACH_WP543, /* Compex WP543 */
|
||||
Loading…
Reference in new issue