hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

imx6: backport ahci support

Browse Source 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37936
master
Luka Perkov 11 years ago
parent b2c852e685
commit 2964a11933
4 changed files with 545 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 306
      target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
  2. 145
      target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
  3. 68
      target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
  4. 26
      target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch

306
target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
Unescape View File

@ -0,0 +1,306 @@
From 9e54eae23bc9cca0d8a955018c35b1250e09a73a Mon Sep 17 00:00:00 2001
From: Richard Zhu <r65037@freescale.com>
Date: Wed, 24 Jul 2013 14:15:29 +0800
Subject: [PATCH] ahci_imx: add ahci sata support on imx platforms
imx6q contains one Synopsys AHCI SATA controller, But it can't share
ahci_platform driver with other controllers because there are some
misalignments of the generic AHCI controller - the bits definitions of
the HBA registers, the Vendor Specific registers, the AHCI PHY clock
and the AHCI signals adjustment window(GPR13 register).
- CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
should be configured to be '1'
- bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
should be set to be '1'.(default 0)
- One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
configured regarding to the frequency of AHB bus clock.
- Configurations of the AHCI PHY clock, and the signal parameters of
the GPR13
Setup its own ahci sata driver, contained the imx6q specific
initialized codes, re-use the generic ahci_platform driver, and keep
the generic ahci_platform driver clean as much as possible.
tj: patch description reformatted
Signed-off-by: Richard Zhu <r65037@freescale.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ata/Kconfig | 9 ++
drivers/ata/Makefile | 1 +
drivers/ata/ahci_imx.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 246 insertions(+)
create mode 100644 drivers/ata/ahci_imx.c
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
+config AHCI_IMX
+ tristate "Freescale i.MX AHCI SATA support"
+ depends on SATA_AHCI_PLATFORM
+ help
+ This option enables support for the Freescale i.MX SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
--- /dev/null
+++ b/drivers/ata/ahci_imx.c
@@ -0,0 +1,236 @@
+/*
+ * Freescale IMX AHCI SATA platform driver
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/ahci_platform.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include "ahci.h"
+
+enum {
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+struct imx_ahci_priv {
+ struct platform_device *ahci_pdev;
+ struct clk *sata_ref_clk;
+ struct clk *ahb_clk;
+ struct regmap *gpr;
+};
+
+static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
+{
+ int ret = 0;
+ unsigned int reg_val;
+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+
+ imxpriv->gpr =
+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ if (IS_ERR(imxpriv->gpr)) {
+ dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
+ return PTR_ERR(imxpriv->gpr);
+ }
+
+ ret = clk_prepare_enable(imxpriv->sata_ref_clk);
+ if (ret < 0) {
+ dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
+ return ret;
+ }
+
+ /*
+ * set PHY Paremeters, two steps to configure the GPR13,
+ * one write for rest of parameters, mask of first write
+ * is 0x07fffffd, and the other one write for setting
+ * the mpll_clk_en.
+ */
+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
+ | IMX6Q_GPR13_SATA_SPD_MODE_MASK
+ | IMX6Q_GPR13_SATA_MPLL_SS_EN
+ | IMX6Q_GPR13_SATA_TX_ATTEN_MASK
+ | IMX6Q_GPR13_SATA_TX_BOOST_MASK
+ | IMX6Q_GPR13_SATA_TX_LVL_MASK
+ | IMX6Q_GPR13_SATA_TX_EDGE_RATE
+ , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
+ | IMX6Q_GPR13_SATA_SPD_MODE_3P0G
+ | IMX6Q_GPR13_SATA_MPLL_SS_EN
+ | IMX6Q_GPR13_SATA_TX_ATTEN_9_16
+ | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
+ | IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+ IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+ usleep_range(100, 200);
+
+ /*
+ * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
+ * and IP vendor specific register HOST_TIMER1MS.
+ * Configure CAP_SSS (support stagered spin up).
+ * Implement the port0.
+ * Get the ahb clock rate, and configure the TIMER1MS register.
+ */
+ reg_val = readl(mmio + HOST_CAP);
+ if (!(reg_val & HOST_CAP_SSS)) {
+ reg_val |= HOST_CAP_SSS;
+ writel(reg_val, mmio + HOST_CAP);
+ }
+ reg_val = readl(mmio + HOST_PORTS_IMPL);
+ if (!(reg_val & 0x1)) {
+ reg_val |= 0x1;
+ writel(reg_val, mmio + HOST_PORTS_IMPL);
+ }
+
+ reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
+ writel(reg_val, mmio + HOST_TIMER1MS);
+
+ return 0;
+}
+
+static void imx6q_sata_exit(struct device *dev)
+{
+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
+
+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+ !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+ clk_disable_unprepare(imxpriv->sata_ref_clk);
+}
+
+static struct ahci_platform_data imx6q_sata_pdata = {
+ .init = imx6q_sata_init,
+ .exit = imx6q_sata_exit,
+};
+
+static const struct of_device_id imx_ahci_of_match[] = {
+ { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata},
+ {},
+};
+MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
+
+static int imx_ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem, *irq, res[2];
+ const struct of_device_id *of_id;
+ const struct ahci_platform_data *pdata = NULL;
+ struct imx_ahci_priv *imxpriv;
+ struct device *ahci_dev;
+ struct platform_device *ahci_pdev;
+ int ret;
+
+ imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
+ if (!imxpriv) {
+ dev_err(dev, "can't alloc ahci_host_priv\n");
+ return -ENOMEM;
+ }
+
+ ahci_pdev = platform_device_alloc("ahci", -1);
+ if (!ahci_pdev)
+ return -ENODEV;
+
+ ahci_dev = &ahci_pdev->dev;
+ ahci_dev->parent = dev;
+
+ imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
+ if (IS_ERR(imxpriv->ahb_clk)) {
+ dev_err(dev, "can't get ahb clock.\n");
+ ret = PTR_ERR(imxpriv->ahb_clk);
+ goto err_out;
+ }
+
+ imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
+ if (IS_ERR(imxpriv->sata_ref_clk)) {
+ dev_err(dev, "can't get sata_ref clock.\n");
+ ret = PTR_ERR(imxpriv->sata_ref_clk);
+ goto err_out;
+ }
+
+ imxpriv->ahci_pdev = ahci_pdev;
+ platform_set_drvdata(pdev, imxpriv);
+
+ of_id = of_match_device(imx_ahci_of_match, dev);
+ if (of_id) {
+ pdata = of_id->data;
+ } else {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!mem || !irq) {
+ dev_err(dev, "no mmio/irq resource\n");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ res[0] = *mem;
+ res[1] = *irq;
+
+ ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
+ ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
+ ahci_dev->of_node = dev->of_node;
+
+ ret = platform_device_add_resources(ahci_pdev, res, 2);
+ if (ret)
+ goto err_out;
+
+ ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
+ if (ret)
+ goto err_out;
+
+ ret = platform_device_add(ahci_pdev);
+ if (ret) {
+err_out:
+ platform_device_put(ahci_pdev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int imx_ahci_remove(struct platform_device *pdev)
+{
+ struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
+ struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
+
+ platform_device_unregister(ahci_pdev);
+ return 0;
+}
+
+static struct platform_driver imx_ahci_driver = {
+ .probe = imx_ahci_probe,
+ .remove = imx_ahci_remove,
+ .driver = {
+ .name = "ahci-imx",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_ahci_of_match,
+ },
+};
+module_platform_driver(imx_ahci_driver);
+
+MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
+MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("ahci:imx");

145
target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
Unescape View File

@ -0,0 +1,145 @@
From 6a6c21ef487be47b300a0b24cd6afeb69d8b9a1a Mon Sep 17 00:00:00 2001
From: Richard Zhu <r65037@freescale.com>
Date: Wed, 24 Jul 2013 14:15:28 +0800
Subject: [PATCH] ARM: imx6q: update the sata bits definitions of gpr13
Replace the SATA_PHY_# by the more readable definitons.
tj: Being routed through libata branch to enable implementation of
ahci_imx.
Signed-off-by: Richard Zhu <r65037@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 121 +++++++++++++++++++---------
1 file changed, 84 insertions(+), 37 deletions(-)
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -279,41 +279,88 @@
#define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)
#define IMX6Q_GPR13_CAN1_STOP_REQ BIT(28)
#define IMX6Q_GPR13_ENET_STOP_REQ BIT(27)
-#define IMX6Q_GPR13_SATA_PHY_8_MASK (0x7 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_0_5_DB (0x0 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_1_0_DB (0x1 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_1_5_DB (0x2 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_2_0_DB (0x3 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_2_5_DB (0x4 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_3_0_DB (0x5 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_3_5_DB (0x6 << 24)
-#define IMX6Q_GPR13_SATA_PHY_8_4_0_DB (0x7 << 24)
-#define IMX6Q_GPR13_SATA_PHY_7_MASK (0x1f << 19)
-#define IMX6Q_GPR13_SATA_PHY_7_SATA1I (0x10 << 19)
-#define IMX6Q_GPR13_SATA_PHY_7_SATA1M (0x10 << 19)
-#define IMX6Q_GPR13_SATA_PHY_7_SATA1X (0x1a << 19)
-#define IMX6Q_GPR13_SATA_PHY_7_SATA2I (0x12 << 19)
-#define IMX6Q_GPR13_SATA_PHY_7_SATA2M (0x12 << 19)
-#define IMX6Q_GPR13_SATA_PHY_7_SATA2X (0x1a << 19)
-#define IMX6Q_GPR13_SATA_PHY_6_MASK (0x7 << 16)
-#define IMX6Q_GPR13_SATA_SPEED_MASK BIT(15)
-#define IMX6Q_GPR13_SATA_SPEED_1P5G 0x0
-#define IMX6Q_GPR13_SATA_SPEED_3P0G BIT(15)
-#define IMX6Q_GPR13_SATA_PHY_5 BIT(14)
-#define IMX6Q_GPR13_SATA_PHY_4_MASK (0x7 << 11)
-#define IMX6Q_GPR13_SATA_PHY_4_16_16 (0x0 << 11)
-#define IMX6Q_GPR13_SATA_PHY_4_14_16 (0x1 << 11)
-#define IMX6Q_GPR13_SATA_PHY_4_12_16 (0x2 << 11)
-#define IMX6Q_GPR13_SATA_PHY_4_10_16 (0x3 << 11)
-#define IMX6Q_GPR13_SATA_PHY_4_9_16 (0x4 << 11)
-#define IMX6Q_GPR13_SATA_PHY_4_8_16 (0x5 << 11)
-#define IMX6Q_GPR13_SATA_PHY_3_MASK (0xf << 7)
-#define IMX6Q_GPR13_SATA_PHY_3_OFF 0x7
-#define IMX6Q_GPR13_SATA_PHY_2_MASK (0x1f << 2)
-#define IMX6Q_GPR13_SATA_PHY_2_OFF 0x2
-#define IMX6Q_GPR13_SATA_PHY_1_MASK (0x3 << 0)
-#define IMX6Q_GPR13_SATA_PHY_1_FAST (0x0 << 0)
-#define IMX6Q_GPR13_SATA_PHY_1_MED (0x1 << 0)
-#define IMX6Q_GPR13_SATA_PHY_1_SLOW (0x2 << 0)
-
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK (0x7 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB (0x0 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB (0x1 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB (0x2 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB (0x3 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB (0x4 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB (0x5 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB (0x6 << 24)
+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB (0x7 << 24)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK (0x1f << 19)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1I (0x10 << 19)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1M (0x10 << 19)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1X (0x1a << 19)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2I (0x12 << 19)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M (0x12 << 19)
+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2X (0x1a << 19)
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK (0x7 << 16)
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_1F (0x0 << 16)
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_2F (0x1 << 16)
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_4F (0x2 << 16)
+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F (0x3 << 16)
+#define IMX6Q_GPR13_SATA_SPD_MODE_MASK BIT(15)
+#define IMX6Q_GPR13_SATA_SPD_MODE_1P5G 0x0
+#define IMX6Q_GPR13_SATA_SPD_MODE_3P0G BIT(15)
+#define IMX6Q_GPR13_SATA_MPLL_SS_EN BIT(14)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_MASK (0x7 << 11)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_16_16 (0x0 << 11)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_14_16 (0x1 << 11)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_12_16 (0x2 << 11)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_10_16 (0x3 << 11)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_9_16 (0x4 << 11)
+#define IMX6Q_GPR13_SATA_TX_ATTEN_8_16 (0x5 << 11)
+#define IMX6Q_GPR13_SATA_TX_BOOST_MASK (0xf << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB (0x0 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB (0x1 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB (0x2 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB (0x3 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB (0x4 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB (0x5 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB (0x6 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB (0x7 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB (0x8 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB (0x9 << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB (0xa << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB (0xb << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB (0xc << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB (0xd << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB (0xe << 7)
+#define IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB (0xf << 7)
+#define IMX6Q_GPR13_SATA_TX_LVL_MASK (0x1f << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_937_V (0x00 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_947_V (0x01 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_957_V (0x02 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_966_V (0x03 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_976_V (0x04 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_986_V (0x05 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_0_996_V (0x06 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_005_V (0x07 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_015_V (0x08 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_025_V (0x09 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_035_V (0x0a << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_045_V (0x0b << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_054_V (0x0c << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_064_V (0x0d << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_074_V (0x0e << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_084_V (0x0f << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_094_V (0x10 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_104_V (0x11 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_113_V (0x12 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_123_V (0x13 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_133_V (0x14 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_143_V (0x15 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_152_V (0x16 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_162_V (0x17 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_172_V (0x18 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_182_V (0x19 << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_191_V (0x1a << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_201_V (0x1b << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_211_V (0x1c << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_221_V (0x1d << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_230_V (0x1e << 2)
+#define IMX6Q_GPR13_SATA_TX_LVL_1_240_V (0x1f << 2)
+#define IMX6Q_GPR13_SATA_MPLL_CLK_EN BIT(1)
+#define IMX6Q_GPR13_SATA_TX_EDGE_RATE BIT(0)
#endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */

68
target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
Unescape View File

@ -0,0 +1,68 @@
From 0fb1f804269e549b556b475c8655bc862c220622 Mon Sep 17 00:00:00 2001
From: Richard Zhu <r65037@freescale.com>
Date: Tue, 16 Jul 2013 11:28:46 +0800
Subject: [PATCH] ARM: dtsi: enable ahci sata on imx6q platforms
Only imx6q has the ahci sata controller, enable
it on imx6q platforms.
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/imx6q-sabreauto.dts | 4 ++++
arch/arm/boot/dts/imx6q-sabrelite.dts | 4 ++++
arch/arm/boot/dts/imx6q-sabresd.dts | 4 ++++
arch/arm/boot/dts/imx6q.dtsi | 9 +++++++++
4 files changed, 21 insertions(+)
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -33,3 +33,7 @@
};
};
};
+
+&sata {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,6 +65,10 @@
};
};
+&sata {
+ status = "okay";
+};
+
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -37,3 +37,7 @@
};
};
};
+
+&sata {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -332,6 +332,15 @@
};
};
+ sata: sata@02200000 {
+ compatible = "fsl,imx6q-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 0x04>;
+ clocks = <&clks 154>, <&clks 187>, <&clks 105>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
ipu2: ipu@02800000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";

26
target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
Unescape View File

@ -0,0 +1,26 @@
From 867974fc09f93bdd7f98d46ac3733934486bbf4a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 26 Jul 2013 08:57:56 -0400
Subject: [PATCH] ahci_imx: depend on CONFIG_MFD_SYSCON
ahci_imx makes use of regmap but the dependency wasn't specified in
Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but
CONFIG_MFD_SYSCON is not. Add the Kconfig dependency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/ata/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM
config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
- depends on SATA_AHCI_PLATFORM
+ depends on SATA_AHCI_PLATFORM && MFD_SYSCON
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
Write Preview
Loading…
Cancel
Save