ramips: add support for Planex MZK-EX300NP

MZK-EX300NP is MT7620A based wifi repeater.
Built-in power supply.
64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 49235
John Crispin 9 years ago
parent e55d86ef32
commit 279eeeb744
  1. 3
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 1
      target/linux/ramips/base-files/etc/board.d/02_network
  3. 1
      target/linux/ramips/base-files/etc/diag.sh
  4. 3
      target/linux/ramips/base-files/lib/ramips.sh
  5. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  6. 132
      target/linux/ramips/dts/MZK-EX300NP.dts
  7. 2
      target/linux/ramips/image/mt7620.mk
  8. 11
      target/linux/ramips/mt7620/profiles/planex.mk

@ -119,7 +119,8 @@ dir-615-h1)
ucidef_set_led_default "status" "Status LED (amber)" "$board:amber:status" "0"
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-620-d1)
dir-620-d1|\
mzk-ex300np)
set_wifi_led "$board:green:wifi"
;;
dir-810l|\

@ -163,6 +163,7 @@ ramips_setup_interfaces()
cs-qr10|\
d105|\
hpm|\
mzk-ex300np|\
na930|\
wli-tx4-ag300n|\
wrh-300cr)

@ -155,6 +155,7 @@ get_status_led() {
whr-600d)
status_led="$board:orange:wifi"
;;
mzk-ex300np|\
rt-n10-plus|\
tew-691gr|\
tew-692gr|\

@ -295,6 +295,9 @@ ramips_board_detect() {
*"MZK-DP150N")
name="mzk-dp150n"
;;
*"MZK-EX300NP")
name="mzk-ex300np"
;;
*"MZK-W300NH2"*)
name="mzk-w300nh2"
;;

@ -89,6 +89,7 @@ platform_check_image() {
mt7628|\
mzk-750dhp|\
mzk-dp150n|\
mzk-ex300np|\
mzk-w300nh2|\
mzk-wdpr|\
nbg-419n|\

@ -0,0 +1,132 @@
/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex MZK-EX300NP";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x730000>;
};
partition@780000 {
label = "Udata";
reg = <0x780000 0x80000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "mzk-ex300np:green:wifi";
gpios = <&gpio3 0 1>;
};
wps {
label = "mzk-ex300np:green:wps";
gpios = <&gpio1 5 1>;
};
rep {
label = "mzk-ex300np:blue:rep";
gpios = <&gpio1 4 1>;
};
wifi1 {
label = "mzk-ex300np:blue:wifi1";
gpios = <&gpio1 1 1>;
};
wifi2 {
label = "mzk-ex300np:blue:wifi2";
gpios = <&gpio1 2 1>;
};
wifi3 {
label = "mzk-ex300np:blue:wifi3";
gpios = <&gpio1 0 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 3 0>;
linux,code = <0x211>;
};
};
};

@ -101,6 +101,7 @@ na930_mtd_size=20971520
Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
Image/Build/Profile/MZK-EX300NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP)
Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661)
Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
@ -147,6 +148,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/DB-WRT01,$(1))
$(call Image/Build/Profile/MZK-750DHP,$(1))
$(call Image/Build/Profile/MZK-EX300NP,$(1))
$(call Image/Build/Profile/NA930,$(1))
$(call Image/Build/Profile/HC5661,$(1))
$(call Image/Build/Profile/HC5761,$(1))

@ -28,3 +28,14 @@ define Profile/MZK-750DHP/Description
Package set optimized for the Planex MZK-750DHP.
endef
$(eval $(call Profile,MZK-750DHP))
define Profile/MZK-EX300NP
NAME:=Planex MZK-EX300NP
PACKAGES:=
endef
define Profile/MZK-EX300NP/Description
Package set optimized for the Planex MZK-EX300NP.
endef
$(eval $(call Profile,MZK-EX300NP))

Loading…
Cancel
Save