ar71xx: add support for PQI Air Pen

SoC: AR9331
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

Changes in v2:
alphabetical ordering, tabs fron spaces.
master
YuheiOKAWA 8 years ago committed by John Crispin
parent 78c2ec0f47
commit 261415a660
  1. 4
      target/linux/ar71xx/base-files/etc/board.d/01_leds
  2. 1
      target/linux/ar71xx/base-files/etc/board.d/02_network
  3. 3
      target/linux/ar71xx/base-files/lib/ar71xx.sh
  4. 1
      target/linux/ar71xx/base-files/lib/upgrade/platform.sh
  5. 1
      target/linux/ar71xx/config-4.4
  6. 10
      target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
  7. 1
      target/linux/ar71xx/files/arch/mips/ath79/Makefile
  8. 99
      target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
  9. 1
      target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
  10. 11
      target/linux/ar71xx/image/generic.mk

@ -431,6 +431,10 @@ omy-x1)
ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
;;
pqi-air-pen)
ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
;;
qihoo-c301)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
;;

@ -83,6 +83,7 @@ ar71xx_setup_interfaces()
mr900|\
mr900v2|\
mynet-rext|\
pqi-air-pen|\
rb-411|\
rb-411u|\
rb-911g-2hpnd|\

@ -775,6 +775,9 @@ ar71xx_board_detect() {
*"PB44 reference board")
name="pb44"
;;
*"PQI Air Pen")
name="pqi-air-pen"
;;
*"Qihoo 360 C301")
name="qihoo-c301"
;;

@ -250,6 +250,7 @@ platform_check_image() {
nanostation-m-xw|\
nanostation-m|\
nbg460n_550n_550nh|\
pqi-air-pen|\
rocket-m-ti|\
rocket-m-xw|\
rocket-m|\

@ -136,6 +136,7 @@ CONFIG_ATH79_MACH_OMY_X1=y
CONFIG_ATH79_MACH_ONION_OMEGA=y
CONFIG_ATH79_MACH_PB42=y
CONFIG_ATH79_MACH_PB44=y
CONFIG_ATH79_MACH_PQI_AIR_PEN=y
CONFIG_ATH79_MACH_QIHOO_C301=y
CONFIG_ATH79_MACH_R6100=y
# CONFIG_ATH79_MACH_RB2011 is not set

@ -276,6 +276,16 @@ config ATH79_MACH_ESR1750
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_PQI_AIR_PEN
bool "PQI Air Pen"
select SOC_AR933X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_SOM9331
bool "SOM9331 support"
select SOC_AR933X

@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_OMY_X1) += mach-omy-x1.o
obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
obj-$(CONFIG_ATH79_MACH_PQI_AIR_PEN) += mach-pqi-air-pen.o
obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o

@ -0,0 +1,99 @@
/*
* PQI Air Pen stick support
*
* Copyright (C) 2016 YuheiOKAWA <tochiro.srchack@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define PQI_AIR_PEN_GPIO_LED_WLAN 0
#define PQI_AIR_PEN_GPIO_LED_WPS 23
#define PQI_AIR_PEN_GPIO_BTN_WPS 22
#define PQI_AIR_PEN_GPIO_BTN_RESET 12
#define PQI_AIR_PEN_KEYS_POLL_INTERVAL 20 /* msecs */
#define PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL (3 * PQI_AIR_PEN_KEYS_POLL_INTERVAL)
#define PQI_AIR_PEN_WMAC_CALDATA_OFFSET 0x1000
#define PQI_AIR_PEN_LAN_MAC_OFFSET 0x1002
#define PQI_AIR_PEN_WMAC_MAC_OFFSET 0x1002
static struct gpio_led pqi_air_pen_leds_gpio[] __initdata = {
{
.name = "pqi-air-pen:blue:wlan",
.gpio = PQI_AIR_PEN_GPIO_LED_WLAN,
.active_low = 0,
},
{
.name = "pqi-air-pen:blue:wps",
.gpio = PQI_AIR_PEN_GPIO_LED_WPS,
.active_low = 0,
},
};
static struct gpio_keys_button pqi_air_pen_gpio_keys[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
.gpio = PQI_AIR_PEN_GPIO_BTN_WPS,
.active_low = 0,
},
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
.gpio = PQI_AIR_PEN_GPIO_BTN_RESET,
.active_low = 0,
},
};
static void __init pqi_air_pen_setup(void)
{
/* ART base address */
u8 *art = (u8 *) KSEG1ADDR(0x9f050000);
/* register flash. */
ath79_register_m25p80(NULL);
/* register wireless mac with cal data */
ath79_register_wmac(art + PQI_AIR_PEN_WMAC_CALDATA_OFFSET, art + PQI_AIR_PEN_WMAC_MAC_OFFSET);
/* false PHY_SWAP and PHY_ADDR_SWAP bits */
ath79_setup_ar933x_phy4_switch(false, false);
/* register gpio LEDs and keys */
ath79_register_leds_gpio(-1, ARRAY_SIZE(pqi_air_pen_leds_gpio),
pqi_air_pen_leds_gpio);
ath79_register_gpio_keys_polled(-1, PQI_AIR_PEN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(pqi_air_pen_gpio_keys),
pqi_air_pen_gpio_keys);
/* enable usb */
ath79_register_usb();
/* register eth0 as LAN */
ath79_init_mac(ath79_eth0_data.mac_addr, art + PQI_AIR_PEN_LAN_MAC_OFFSET, 0);
ath79_register_mdio(0, 0x0);
ath79_register_eth(0);
}
MIPS_MACHINE(ATH79_MACH_PQI_AIR_PEN, "PQI-AIR-PEN", "PQI Air Pen",pqi_air_pen_setup);

@ -141,6 +141,7 @@ enum ath79_mach_type {
ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
ATH79_MACH_PB42, /* Atheros PB42 */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */
ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
ATH79_MACH_R6100, /* NETGEAR R6100 */
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */

@ -323,6 +323,17 @@ endef
TARGET_DEVICES += cr5000-nocloud
define Device/pqi-air-pen
DEVICE_TITLE := PQI Air Pen
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
BOARDNAME = PQI-AIR-PEN
IMAGE_SIZE = 7744k
CONSOLE = ttyATH0,115200
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
endef
TARGET_DEVICES += pqi-air-pen
define Device/antminer-s1
$(Device/tplink-8mlzma)
DEVICE_TITLE := Antminer-S1

Loading…
Cancel
Save