Use 2.6.25 for rdc321x

SVN-Revision: 11439
master
Florian Fainelli 16 years ago
parent 6d88031192
commit 23d1a5bd88
  1. 2
      target/linux/rdc/Makefile
  2. 374
      target/linux/rdc/config-2.6.25
  3. 24
      target/linux/rdc/files/arch/x86/kernel/cpu/rdc.c
  4. 5
      target/linux/rdc/files/arch/x86/mach-rdc/Makefile
  5. 91
      target/linux/rdc/files/arch/x86/mach-rdc/gpio.c
  6. 114
      target/linux/rdc/files/arch/x86/mach-rdc/platform.c
  7. 14
      target/linux/rdc/files/arch/x86/mach-rdc/setup.c
  8. 272
      target/linux/rdc/files/arch/x86/mach-rdc/wdt.c
  9. 71
      target/linux/rdc/files/drivers/leds/leds-rdc3211.c
  10. 6
      target/linux/rdc/files/include/asm-x86/gpio.h
  11. 15
      target/linux/rdc/files/include/asm-x86/mach-generic/gpio.h
  12. 56
      target/linux/rdc/files/include/asm-x86/mach-rdc/gpio.h
  13. 6
      target/linux/rdc/files/include/asm-x86/mach-rdc/rdc321x_defs.h
  14. 15
      target/linux/rdc/patches/001-x86_generic_gpio.patch
  15. 41
      target/linux/rdc/patches/002-r6040_ethernet.patch
  16. 81
      target/linux/rdc/patches/004-rdc_fixes.patch
  17. 18
      target/linux/rdc/patches/006-pci_ids.patch
  18. 38
      target/linux/rdc/patches/600-x86_lzma.patch

@ -11,7 +11,7 @@ BOARD:=rdc
BOARDNAME:=RDC 321x
FEATURES:=squashfs jffs2 pci
LINUX_VERSION:=2.6.24.7
LINUX_VERSION:=2.6.25.4
include $(INCLUDE_DIR)/target.mk

@ -0,0 +1,374 @@
# CONFIG_60XX_WDT is not set
# CONFIG_64BIT is not set
# CONFIG_8139TOO is not set
# CONFIG_ACQUIRE_WDT is not set
CONFIG_ADM6996_PHY=y
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_AGP is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SUPPORTS_AOUT=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_PIIX=m
# CONFIG_AUDIT_ARCH is not set
CONFIG_BASE_SMALL=0
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_BITREVERSE=y
CONFIG_BLK_DEV_IDE=m
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_BOUNCE=y
# CONFIG_BROADCOM_PHY is not set
CONFIG_CLASSIC_RCU=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_TWOFISH_586=m
# CONFIG_CS5535_GPIO is not set
# CONFIG_DCDBAS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
# CONFIG_DELL_RBU is not set
CONFIG_DEVPORT=y
# CONFIG_DMADEVICES is not set
CONFIG_DMI=y
CONFIG_DMIID=y
CONFIG_DOUBLEFAULT=y
# CONFIG_E100 is not set
# CONFIG_E1000E_ENABLED is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EDAC is not set
# CONFIG_EDD is not set
# CONFIG_EUROTECH_WDT is not set
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
# CONFIG_GENERIC_CPU is not set
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_GENERIC_LOCKBREAK is not set
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_GEN_RTC is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_HID=m
CONFIG_HID_SUPPORT=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
CONFIG_I2C=m
# CONFIG_I2C_ALGOBIT is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8K is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_IBM_ASM is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_ICPLUS_PHY=y
CONFIG_IDE=m
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_IDE_GENERIC is not set
# CONFIG_IDE_PROC_FS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INPUT=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BUTTONS is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_YEALINK=m
# CONFIG_IOMMU_HELPER is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_TYPE_UDELAY=2
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_ISA is not set
CONFIG_ISA_DMA_API=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_ITCO_WDT is not set
CONFIG_JFS_FS=m
CONFIG_KEXEC=y
CONFIG_KTIME_SCALAR=y
# CONFIG_KVM is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_LEDS_ALIX is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LGUEST is not set
CONFIG_LSF=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586MMX is not set
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MCA is not set
# CONFIG_MCORE2 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MCYRIXIII is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MEFFICEON is not set
# CONFIG_MEMSTICK is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MICROCODE is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPSC is not set
CONFIG_MTD=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_MTD_BLOCK2MTD is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_RDC3210=y
CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
CONFIG_MTD_RDC3210_BUSWIDTH=2
# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
CONFIG_MTD_RDC3210_SIZE=0x400000
# CONFIG_MTD_RDC3210_STATIC_MAP is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTRR is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NLS_ISO8859_2=m
CONFIG_NOHIGHMEM=y
CONFIG_NO_HZ=y
# CONFIG_NSC_GPIO is not set
CONFIG_NVRAM=y
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_CS5536 is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_PC87413_WDT is not set
CONFIG_PCCARD=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCMCIA=m
CONFIG_PHYLIB=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_PHYSICAL_START=0x100000
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_R6040=m
CONFIG_REALTEK_PHY=y
CONFIG_RELOCATABLE=y
# CONFIG_RTC is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SBC7240_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SCHED_HRTICK is not set
# CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCx200 is not set
# CONFIG_SCx200_ACB is not set
CONFIG_SEMAPHORE_SLEEPERS=y
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SLABINFO=y
# CONFIG_SMP is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_SND_SIS7019 is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_SONYPI is not set
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TELCLOCK is not set
# CONFIG_THERMAL is not set
CONFIG_TICK_ONESHOT=y
# CONFIG_TOSHIBA is not set
CONFIG_UID16=y
CONFIG_USB=m
# CONFIG_USBPCWATCHDOG is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_UHCI_HCD is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VGASTATE is not set
# CONFIG_VIA_RHINE is not set
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_VM86 is not set
# CONFIG_VMSPLIT_1G is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_WAFER_WDT is not set
CONFIG_X86=y
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86_ALIGNMENT_16=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_BSWAP=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_CPUID=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_ES7000 is not set
CONFIG_X86_F00F_BUG=y
# CONFIG_X86_GENERIC is not set
# CONFIG_X86_GENERICARCH is not set
CONFIG_X86_INVLPG=y
CONFIG_X86_L1_CACHE_SHIFT=4
# CONFIG_X86_MCE is not set
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_MSR=y
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_PAE is not set
# CONFIG_X86_PC is not set
CONFIG_X86_POPAD_OK=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_RDC321X=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_XADD=y
# CONFIG_ZONE_DMA32 is not set

@ -1,24 +0,0 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/processor.h>
#include "cpu.h"
static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
.c_vendor = "RDC",
.c_models = {
{ .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
{
[0] = "R861x(-G)",
}
},
},
};
int __init rdc_init_cpu(void)
{
cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
return 0;
}

@ -1,5 +0,0 @@
#
# Makefile for the RDC321x specific parts of the kernel
#
obj-$(CONFIG_X86_RDC) := gpio.o platform.o wdt.o

@ -1,91 +0,0 @@
/*
* Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
* RDC321x architecture specific GPIO support
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/autoconf.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/mach-rdc/rdc321x_defs.h>
static inline int rdc_gpio_is_valid(unsigned gpio)
{
return (gpio <= RDC_MAX_GPIO);
}
static unsigned int rdc_gpio_read(unsigned gpio)
{
unsigned int val;
val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
outl(val, RDC3210_CFGREG_ADDR);
udelay(10);
val = inl(RDC3210_CFGREG_DATA);
val |= (0x1 << (gpio & 0x1F));
outl(val, RDC3210_CFGREG_DATA);
udelay(10);
val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
outl(val, RDC3210_CFGREG_ADDR);
udelay(10);
val = inl(RDC3210_CFGREG_DATA);
return val;
}
static void rdc_gpio_write(unsigned int val)
{
if (val) {
outl(val, RDC3210_CFGREG_DATA);
udelay(10);
}
}
int rdc_gpio_get_value(unsigned gpio)
{
if (rdc_gpio_is_valid(gpio))
return (int)rdc_gpio_read(gpio);
else
return -EINVAL;
}
EXPORT_SYMBOL(rdc_gpio_get_value);
void rdc_gpio_set_value(unsigned gpio, int value)
{
unsigned int val;
if (!rdc_gpio_is_valid(gpio))
return;
val = rdc_gpio_read(gpio);
if (value)
val &= ~(0x1 << (gpio & 0x1F));
else
val |= (0x1 << (gpio & 0x1F));
rdc_gpio_write(val);
}
EXPORT_SYMBOL(rdc_gpio_set_value);
int rdc_gpio_direction_input(unsigned gpio)
{
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_input);
int rdc_gpio_direction_output(unsigned gpio, int value)
{
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_output);

@ -1,114 +0,0 @@
/*
* $Id: platform.c 8331 2007-08-03 15:59:23Z florian $
*
* Generic RDC321x platform devices
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/version.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <asm/gpio.h>
/* Flash */
static struct resource rdc_flash_resource[] = {
[0] = {
.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
.end = (u32)-1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rdc_flash_device = {
.name = "rdc321x-flash",
.id = -1,
.num_resources = ARRAY_SIZE(rdc_flash_resource),
.resource = rdc_flash_resource,
};
/* LEDS */
static struct gpio_led default_leds[] = {
{ .name = "rdc321x:dmz", .gpio = 1, },
};
static struct gpio_led_platform_data rdc321x_led_data = {
.num_leds = ARRAY_SIZE(default_leds),
.leds = default_leds,
};
static struct platform_device rdc321x_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rdc321x_led_data,
}
};
/* Watchdog */
static struct platform_device rdc321x_wdt = {
.name = "rdc321x-wdt",
.id = -1,
.num_resources = 0,
};
/* Button */
static struct gpio_keys_button rdc321x_gpio_btn[] = {
{
.gpio = 0,
.code = BTN_0,
.desc = "Reset",
.active_low = 1,
}
};
static struct gpio_keys_platform_data rdc321x_gpio_btn_data = {
.buttons = rdc321x_gpio_btn,
.nbuttons = ARRAY_SIZE(rdc321x_gpio_btn),
};
static struct platform_device rdc321x_button = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &rdc321x_gpio_btn_data,
}
};
static struct platform_device *rdc321x_devs[] = {
&rdc_flash_device,
&rdc321x_leds,
&rdc321x_wdt,
&rdc321x_button
};
static int __init rdc_board_setup(void)
{
return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
}
arch_initcall(rdc_board_setup);

@ -1,14 +0,0 @@
/*
* Machine specific setup for generic
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/arch_hooks.h>
#include <asm/io.h>
#include <asm/setup.h>
char * __init machine_specific_memory_setup(void)
{
return "RDC R-321x";
}

@ -1,272 +0,0 @@
/*
* RDC321x watchdog driver
*
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
*
* This driver is highly inspired from the cpu5_wdt driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/timer.h>
#include <linux/completion.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/mach-rdc/rdc321x_defs.h>
#define RDC_WDT_MASK 0x80000000 /* Mask */
#define RDC_WDT_EN 0x00800000 /* Enable bit */
#define RDC_WDT_WTI 0x00200000 /* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
#define RDC_WDT_RST 0x00100000 /* Reset bit */
#define RDC_WDT_WIF 0x00040000 /* WDT IRQ Flag */
#define RDC_WDT_IRT 0x00000100 /* IRQ Routing table */
#define RDC_WDT_CNT 0x00000001 /* WDT count */
#define RDC_CLS_TMR 0x80003844 /* Clear timer */
#define RDC_WDT_INTERVAL (HZ/10+1)
int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static int ticks = 1000;
/* some device data */
static struct {
struct completion stop;
volatile int running;
struct timer_list timer;
volatile int queue;
int default_ticks;
unsigned long inuse;
} rdc321x_wdt_device;
/* generic helper functions */
static void rdc321x_wdt_trigger(unsigned long unused)
{
if( rdc321x_wdt_device.running )
ticks--;
/* keep watchdog alive */
outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);
/* requeue?? */
if (rdc321x_wdt_device.queue && ticks)
mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
else {
/* ticks doesn't matter anyway */
complete(&rdc321x_wdt_device.stop);
}
}
static void rdc321x_wdt_reset(void)
{
ticks = rdc321x_wdt_device.default_ticks;
}
static void rdc321x_wdt_start(void)
{
if (!rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 1;
/* Clear the timer */
outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
/* Enable watchdog and set the timeout to 81.92 us */
outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
}
/* if process dies, counter is not decremented */
rdc321x_wdt_device.running++;
}
static int rdc321x_wdt_stop(void)
{
if (rdc321x_wdt_device.running)
rdc321x_wdt_device.running = 0;
ticks = rdc321x_wdt_device.default_ticks;
return -EIO;
}
/* filesystem operations */
static int rdc321x_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
return -EBUSY;
return nonseekable_open(inode, file);
}
static int rdc321x_wdt_release(struct inode *inode, struct file *file)
{
clear_bit(0, &rdc321x_wdt_device.inuse);
return 0;
}
static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
unsigned int value;
static struct watchdog_info ident =
{
.options = WDIOF_CARDRESET,
.identity = "RDC321x WDT",
};
switch(cmd) {
case WDIOC_KEEPALIVE:
rdc321x_wdt_reset();
break;
case WDIOC_GETSTATUS:
/* Read the value from the DATA register */
value = inl(RDC3210_CFGREG_DATA);
if ( copy_to_user(argp, &value, sizeof(int)) )
return -EFAULT;
break;
case WDIOC_GETSUPPORT:
if ( copy_to_user(argp, &ident, sizeof(ident)) )
return -EFAULT;
break;
case WDIOC_SETOPTIONS:
if ( copy_from_user(&value, argp, sizeof(int)) )
return -EFAULT;
switch(value) {
case WDIOS_ENABLECARD:
rdc321x_wdt_start();
break;
case WDIOS_DISABLECARD:
return rdc321x_wdt_stop();
default:
return -EINVAL;
}
break;
default:
return -ENOTTY;
}
return 0;
}
static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
{
if ( !count )
return -EIO;
rdc321x_wdt_reset();
return count;
}
static const struct file_operations rdc321x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = rdc321x_wdt_ioctl,
.open = rdc321x_wdt_open,
.write = rdc321x_wdt_write,
.release = rdc321x_wdt_release,
};
static struct miscdevice rdc321x_wdt_misc = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &rdc321x_wdt_fops,
};
static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
{
int err;
if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
printk(KERN_ERR PFX "misc_register failed\n");
return err;
}
/* Reset the watchdog */
outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
init_completion(&rdc321x_wdt_device.stop);
rdc321x_wdt_device.queue = 0;
clear_bit(0, &rdc321x_wdt_device.inuse);
setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
rdc321x_wdt_device.default_ticks = ticks;
printk(KERN_INFO PFX "init success\n");
return 0;
}
static int rdc321x_wdt_remove(struct platform_device *pdev)
{
if (rdc321x_wdt_device.queue) {
rdc321x_wdt_device.queue = 0;
wait_for_completion(&rdc321x_wdt_device.stop);
}
misc_deregister(&rdc321x_wdt_misc);
return 0;
}
static struct platform_driver rdc321x_wdt_driver = {
.probe = rdc321x_wdt_probe,
.remove = rdc321x_wdt_remove,
.driver = {
.owner = THIS_MODULE,
.name = "rdc321x-wdt",
},
};
static int __init rdc321x_wdt_init(void)
{
return platform_driver_register(&rdc321x_wdt_driver);
}
static void __exit rdc321x_wdt_exit(void)
{
platform_driver_unregister(&rdc321x_wdt_driver);
}
module_init(rdc321x_wdt_init);
module_exit(rdc321x_wdt_exit);
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION("RDC321x watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

@ -1,71 +0,0 @@
/*
* LED driver for RDC3211 boards
*
* Copyright 2007 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <asm/gpio.h>
static void rdc321x_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
{
gpio_set_value(1, brightness ? 1 : 0);
}
/* The DMZ led is at GPIO line 1 */
static struct led_classdev rdc321x_dmz_led = {
.name = "rdc321x:dmz",
.brightness_set = rdc321x_led_set,
};
static int rdc321x_leds_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &rdc321x_dmz_led);
}
static int rdc321x_leds_remove(struct platform_device *pdev)
{
led_classdev_unregister(&rdc321x_dmz_led);
return 0;
}
static struct platform_driver rdc321x_leds_driver = {
.probe = rdc321x_leds_probe,
.remove = rdc321x_leds_remove,
.driver = {
.name = "rdc321x-leds",
.owner = THIS_MODULE,
}
};
static int __init rdc321x_leds_init(void)
{
int ret;
ret = platform_driver_register(&rdc321x_leds_driver);
return ret;
}
static void __exit rdc321x_leds_exit(void)
{
platform_driver_unregister(&rdc321x_leds_driver);
}
module_init(rdc321x_leds_init);
module_exit(rdc321x_leds_exit);
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
MODULE_DESCRIPTION("RDC321x LED driver");
MODULE_LICENSE("GPL");

@ -1,6 +0,0 @@
#ifndef _ASM_I386_GPIO_H
#define _ASM_I386_GPIO_H
#include <gpio.h>
#endif /* _ASM_I386_GPIO_H */

@ -1,15 +0,0 @@
#ifndef __ASM_MACH_GENERIC_GPIO_H
#define __ASM_MACH_GENERIC_GPIO_H
int gpio_request(unsigned gpio, const char *label);
void gpio_free(unsigned gpio);
int gpio_direction_input(unsigned gpio);
int gpio_direction_output(unsigned gpio, int value);
int gpio_get_value(unsigned gpio);
void gpio_set_value(unsigned gpio, int value);
int gpio_to_irq(unsigned gpio);
int irq_to_gpio(unsigned irq);
#include <asm-generic/gpio.h> /* cansleep wrappers */
#endif /* __ASM_MACH_GENERIC_GPIO_H */

@ -1,56 +0,0 @@
#ifndef _RDC_GPIO_H
#define _RDC_GPIO_H
extern int rdc_gpio_get_value(unsigned gpio);
extern void rdc_gpio_set_value(unsigned gpio, int value);
extern int rdc_gpio_direction_input(unsigned gpio);
extern int rdc_gpio_direction_output(unsigned gpio, int value);
/* Wrappers for the arch-neutral GPIO API */
static inline int gpio_request(unsigned gpio, const char *label)
{
/* Not yet implemented */
return 0;
}
static inline void gpio_free(unsigned gpio)
{
/* Not yet implemented */
}
static inline int gpio_direction_input(unsigned gpio)
{
return rdc_gpio_direction_input(gpio);
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
return rdc_gpio_direction_output(gpio, value);
}
static inline int gpio_get_value(unsigned gpio)
{
return rdc_gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned gpio, int value)
{
rdc_gpio_set_value(gpio, value);
}
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
return irq;
}
/* For cansleep */
#include <asm-generic/gpio.h>
#endif /* _RDC_GPIO_H_ */

@ -1,6 +0,0 @@
#define PFX "rdc321x: "
/* General purpose configuration and data registers */
#define RDC3210_CFGREG_ADDR 0x0CF8
#define RDC3210_CFGREG_DATA 0x0CFC
#define RDC_MAX_GPIO 0x3A

@ -1,15 +0,0 @@
Index: linux-2.6.24.7/arch/x86/Kconfig
===================================================================
--- linux-2.6.24.7.orig/arch/x86/Kconfig
+++ linux-2.6.24.7/arch/x86/Kconfig
@@ -81,6 +81,10 @@ config GENERIC_BUG
default y
depends on BUG
+config GENERIC_GPIO
+ bool
+ default n
+
config GENERIC_HWEIGHT
bool
default y

@ -1,41 +0,0 @@
Index: linux-2.6.24.7/drivers/net/Kconfig
===================================================================
--- linux-2.6.24.7.orig/drivers/net/Kconfig
+++ linux-2.6.24.7/drivers/net/Kconfig
@@ -1449,6 +1449,24 @@ config APRICOT
To compile this driver as a module, choose M here. The module
will be called apricot.
+config R6040
+ tristate "RDC Fast-Ethernet support (EXPERIMENTAL)"
+ depends on NET_PCI && EXPERIMENTAL
+ select MII
+ help
+ If you have a network (Ethernet) controller of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called r6040.
+
+
+config R6040_NAPI
+ bool "NAPI support for R6040"
+ depends on R6040
+ default y
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE
Index: linux-2.6.24.7/drivers/net/Makefile
===================================================================
--- linux-2.6.24.7.orig/drivers/net/Makefile
+++ linux-2.6.24.7/drivers/net/Makefile
@@ -116,6 +116,7 @@ obj-$(CONFIG_LNE390) += lne390.o 8390.o
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o
obj-$(CONFIG_AX88796) += ax88796.o

@ -1,81 +0,0 @@
Index: linux-2.6.24.7/arch/x86/Kconfig
===================================================================
--- linux-2.6.24.7.orig/arch/x86/Kconfig
+++ linux-2.6.24.7/arch/x86/Kconfig
@@ -304,6 +304,17 @@ config X86_VSMP
supposed to run on these EM64T-based machines. Only choose this option
if you have one of these machines.
+config X86_RDC
+ bool "Support for RDC 3211 boards"
+ select GENERIC_GPIO
+ select LEDS_GPIO
+ select LEDS_CLASS
+ help
+ Support for RDC 3211 systems. Say 'Y' here if the kernel is
+ supposed to run on an IA-32 RDC R3211 system.
+ Only choose this option if you have such as system, otherwise you
+ should say N here.
+
endchoice
config SCHED_NO_NO_OMIT_FRAME_POINTER
Index: linux-2.6.24.7/arch/x86/kernel/reboot_fixups_32.c
===================================================================
--- linux-2.6.24.7.orig/arch/x86/kernel/reboot_fixups_32.c
+++ linux-2.6.24.7/arch/x86/kernel/reboot_fixups_32.c
@@ -30,6 +30,17 @@ static void cs5536_warm_reset(struct pci
udelay(50); /* shouldn't get here but be safe and spin a while */
}
+static void r8610_reset(struct pci_dev *dev)
+{
+ int i;
+
+ outl(0x80003840,0xCF8);
+ i=inl(0xCFC);
+ i |= 0x1600;
+ outl(i,0xCFC);
+ outb(1,0x92);
+}
+
struct device_fixup {
unsigned int vendor;
unsigned int device;
@@ -40,6 +51,7 @@ static struct device_fixup fixups_table[
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
+{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, r8610_reset },
};
/*
Index: linux-2.6.24.7/arch/x86/Makefile_32
===================================================================
--- linux-2.6.24.7.orig/arch/x86/Makefile_32
+++ linux-2.6.24.7/arch/x86/Makefile_32
@@ -99,6 +99,11 @@ mflags-$(CONFIG_X86_ES7000) := -Iinclude
mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
+# RDC subarch support
+mflags-$(CONFIG_X86_RDC) := -Iinclude/asm-x86/mach-rdc
+mcore-$(CONFIG_X86_RDC) := arch/x86/mach-default
+core-$(CONFIG_X86_RDC) += arch/x86/mach-rdc/
+
# Xen paravirtualization support
core-$(CONFIG_XEN) += arch/x86/xen/
Index: linux-2.6.24.7/include/asm-x86/timex.h
===================================================================
--- linux-2.6.24.7.orig/include/asm-x86/timex.h
+++ linux-2.6.24.7/include/asm-x86/timex.h
@@ -7,6 +7,8 @@
#ifdef CONFIG_X86_ELAN
# define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
+#elif defined(CONFIG_X86_RDC)
+# define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
#else
# define PIT_TICK_RATE 1193182 /* Underlying HZ */
#endif

@ -1,18 +0,0 @@
Index: linux-2.6.24.7/include/linux/pci_ids.h
===================================================================
--- linux-2.6.24.7.orig/include/linux/pci_ids.h
+++ linux-2.6.24.7/include/linux/pci_ids.h
@@ -2106,6 +2106,13 @@
#define PCI_DEVICE_ID_HERC_WIN 0x5732
#define PCI_DEVICE_ID_HERC_UNI 0x5832
+#define PCI_VENDOR_ID_RDC 0x17f3
+#define PCI_DEVICE_ID_RDC_R6020 0x6020
+#define PCI_DEVICE_ID_RDC_R6030 0x6030
+#define PCI_DEVICE_ID_RDC_R6040 0x6040
+#define PCI_DEVICE_ID_RDC_R6060 0x6060
+#define PCI_DEVICE_ID_RDC_R6061 0x6061
+
#define PCI_VENDOR_ID_SITECOM 0x182d
#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069

@ -1004,31 +1004,28 @@ Index: linux-2.6.24.7/scripts/lzma_kern
+printf -v len '%.8x' "$(get-size $(ls -l "$1"))"
+lzma e "$@"
+echo -ne "\x$(echo $len | cut -c 7,8)\x$(echo $len | cut -c 5,6)\x$(echo $len | cut -c 3,4)\x$(echo $len | cut -c 1,2)" >> "$2"
Index: linux-2.6.24.7/arch/x86/boot/compressed/Makefile_32
===================================================================
--- linux-2.6.24.7.orig/arch/x86/boot/compressed/Makefile_32
+++ linux-2.6.24.7/arch/x86/boot/compressed/Makefile_32
@@ -4,8 +4,8 @@
diff -urN linux-2.6.25.4/arch/x86/boot/compressed/Makefile linux-2.6.25.4.new/arch/x86/boot/compressed/Makefile
--- linux-2.6.25.4/arch/x86/boot/compressed/Makefile 2008-05-15 17:00:12.000000000 +0200
+++ linux-2.6.25.4.new/arch/x86/boot/compressed/Makefile 2008-06-11 14:42:09.000000000 +0200
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_32.o misc_32.o piggy.o \
- vmlinux.bin.all vmlinux.relocs
+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head_32.o piggy.o \
+ vmlinux.bin.all vmlinux.relocs lzma_misc.o
EXTRA_AFLAGS := -traditional
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.lzma head_$(BITS).o lzma_misc.o piggy.o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -18,7 +18,7 @@
LDFLAGS := -m elf_$(UTS_MACHINE)
LDFLAGS_vmlinux := -T
@@ -17,7 +17,7 @@ KBUILD_CFLAGS := -m32 -D__KERNEL__ $(LI
$(call cc-option,-fno-stack-protector)
LDFLAGS := -m elf_i386
-$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/misc_32.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(src)/vmlinux_32.lds $(obj)/head_32.o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/lzma_misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
@@ -37,14 +37,14 @@ $(obj)/vmlinux.bin.all: $(vmlinux.bin.al
@@ -44,11 +44,11 @@
$(call if_changed,relocbin)
ifdef CONFIG_RELOCATABLE
@ -1042,9 +1039,12 @@ Index: linux-2.6.24.7/arch/x86/boot/compressed/Makefile_32
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
endif
LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-$(obj)/piggy.o: $(src)/vmlinux_32.scr $(obj)/vmlinux.bin.gz FORCE
+$(obj)/piggy.o: $(src)/vmlinux_32.scr $(obj)/vmlinux.bin.lzma FORCE
@@ -60,5 +60,5 @@
endif
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.lzma FORCE
$(call if_changed,ld)

Loading…
Cancel
Save