bcm53xx: add support for GPIOs

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42638

target/linux/bcm53xx/config-3.14

@@ -21,6 +21,7 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
 CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARM=y
 CONFIG_ARM_APPENDED_DTB=y
 # CONFIG_ARM_ATAG_DTB_COMPAT is not set
@@ -47,6 +48,7 @@ CONFIG_BCMA=y
 CONFIG_BCMA_BLOCKIO=y
 CONFIG_BCMA_DEBUG=y
 CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
 CONFIG_BCMA_HOST_PCI=y
 CONFIG_BCMA_HOST_PCI_POSSIBLE=y
 CONFIG_BCMA_HOST_SOC=y
@@ -105,6 +107,9 @@ CONFIG_GENERIC_SCHED_CLOCK=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
@@ -180,6 +185,7 @@ CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
 CONFIG_OF_EARLY_FLATTREE=y
 CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_MDIO=y
 CONFIG_OF_MTD=y

target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch

@@ -0,0 +1,29 @@
+From e7b1065712e769eb4de7b9d4aa222a4531c2b8fd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sat, 20 Sep 2014 18:21:19 +0200
+Subject: [PATCH V2] ARM: BCM5301X: select GPIOLIB as optional
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+All routers (or 99% of them) based on BCM5301X use GPIOs to control LEDs
+and buttons.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+V2: Don't select GPIOLIB. We may still think about making it default at
+    some point, but we dont' really require it to boot successfully.
+---
+ arch/arm/mach-bcm/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -35,6 +35,7 @@ config ARCH_BCM_MOBILE
+ config ARCH_BCM_5301X
+ 	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+ 	depends on MMU
++	select ARCH_WANT_OPTIONAL_GPIOLIB
+ 	select ARM_GIC
+ 	select CACHE_L2X0
+ 	select HAVE_ARM_SCU if SMP

target/linux/bcm53xx/patches-3.14/122-bcma-gpio-use-ChipCommon-GPIO-IRQ-on-BCM47XX-arch-on.patch

@@ -0,0 +1,37 @@
+From dfe45880e4ac50ebaa57e5f8a52b69e7e74cb7ca Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 21 Sep 2014 20:40:32 +0200
+Subject: [PATCH] bcma: gpio: use ChipCommon GPIO IRQ on BCM47XX arch only
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+GPIOs can be also used on bcm53xx, however this arch requires different
+implementation of IRQ support. It uses different IRQ number (117) and
+different masks & acking.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/bcma/driver_gpio.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -76,7 +76,7 @@ static void bcma_gpio_free(struct gpio_c
+ 	bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
+ }
+ 
+-#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC)
++#if IS_BUILTIN(CONFIG_BCM47XX)
+ static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+ {
+ 	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+@@ -215,7 +215,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ 	chip->set		= bcma_gpio_set_value;
+ 	chip->direction_input	= bcma_gpio_direction_input;
+ 	chip->direction_output	= bcma_gpio_direction_output;
+-#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC)
++#if IS_BUILTIN(CONFIG_BCM47XX)
+ 	chip->to_irq		= bcma_gpio_to_irq;
+ #endif
+ 	switch (cc->core->bus->chipinfo.id) {