imx6: proper fix for io-remap

The previous patch was not the proper fix for PCI devices that require io
resources.  The new patch is the proper fix backported from mainline.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39133
master
Luka Perkov 11 years ago
parent de5d9827ef
commit 1e9161528b
  1. 106
      target/linux/imx6/patches-3.10/0030-PCI-imx6-remove-outbound-io-mem-ATU-region-mapping.patch
  2. 59
      target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch
  3. 104
      target/linux/imx6/patches-3.12/0030-PCI-imx6-remove-outbound-io-mem-ATU-region-mapping.patch
  4. 59
      target/linux/imx6/patches-3.12/0030-pcie-designware-fix-io-transfers.patch

@ -1,106 +0,0 @@
From 93d2b52fe73294d59bbce3a6d4da031647b1f3b2 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 22 Oct 2013 15:56:40 -0700
Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
The IMX6 iATU is used for address translation between the AXI bus
address space and PCI address space. This is used for type0 and type1
config cycles but is not necessary for outbound io/mem regions.
This patch removes the calls that inappropriately re-configures the ATU
viewport for outbound memory and IO after config cycles and removes them
altogether as they are not necessary.
This resolves issues with PCI devices behind switches and has been tested with
a Gige device behind a PLX PEX860x switch.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
1 file changed, 3 insertions(+), 38 deletions(-)
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -43,7 +43,6 @@
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
{
- /* Program viewport 1 : OUTBOUND : CFG1 */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
+ /* Program viewport 0 : OUTBOUND : CFG1 */
+ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
-}
-
-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
-{
- /* Program viewport 0 : OUTBOUND : MEM */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
- PCIE_ATU_LIMIT);
- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
- PCIE_ATU_UPPER_TARGET);
-}
-
-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
-{
- /* Program viewport 1 : OUTBOUND : IO */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
- PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
- PCIE_ATU_LIMIT);
- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
- PCIE_ATU_UPPER_TARGET);
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
- dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
- dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;
@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
- dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
- dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;

@ -0,0 +1,59 @@
From: Pratyush Anand <pratyush.anand@st.com>
pp->io_base which is the input of the outbound IO address translation
unit should be the cpu address, it was programmed wrongly to realio
address.
We should pass global_io_offset rather than sys->io_offset to
pci_ioremap_io, so we map the new window into the first available spot
in the Linux view of the I/O space.
We must also pass cpu address instead of realio address to
pci_ioremap_io.
This patch fixes above issue. It has been tested with Lecroy PTC in AIC
mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
otherwise.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Tested-by: Mohit Kumar <mohit.kumar@st.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
Cc: linux-pci@vger.kernel.org
Cc: spear-devel@list.st.com
---
drivers/pci/host/pcie-designware.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
http://thread.gmane.org/gmane.linux.kernel.pci/27204
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
+ global_io_offset);
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
+ pp->io_base = range.cpu_addr;
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
pp->cfg0_base = pp->cfg.start;
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
- pp->io_base = pp->io.start;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
- pci_ioremap_io(sys->io_offset, pp->io.start);
+ pci_ioremap_io(global_io_offset, pp->io_base);
global_io_offset += SZ_64K;
pci_add_resource_offset(&sys->resources, &pp->io,
sys->io_offset);

@ -1,104 +0,0 @@
From: Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
The IMX6 iATU is used for address translation between the AXI bus
address space and PCI address space. This is used for type0 and type1
config cycles but is not necessary for outbound io/mem regions.
This patch removes the calls that inappropriately re-configures the ATU
viewport for outbound memory and IO after config cycles and removes them
altogether as they are not necessary.
This resolves issues with PCI devices behind switches and has been tested with
a Gige device behind a PLX PEX860x switch.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
1 file changed, 3 insertions(+), 38 deletions(-)
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -43,7 +43,6 @@
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
{
- /* Program viewport 1 : OUTBOUND : CFG1 */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
+ /* Program viewport 0 : OUTBOUND : CFG1 */
+ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
-}
-
-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
-{
- /* Program viewport 0 : OUTBOUND : MEM */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
- PCIE_ATU_LIMIT);
- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
- PCIE_ATU_UPPER_TARGET);
-}
-
-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
-{
- /* Program viewport 1 : OUTBOUND : IO */
- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
- PCIE_ATU_VIEWPORT);
- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
- PCIE_ATU_LIMIT);
- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
- PCIE_ATU_UPPER_TARGET);
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
- dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
- dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;
@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
if (bus->parent->number == pp->root_bus_nr) {
dw_pcie_prog_viewport_cfg0(pp, busdev);
ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
- dw_pcie_prog_viewport_mem_outbound(pp);
} else {
dw_pcie_prog_viewport_cfg1(pp, busdev);
ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
- dw_pcie_prog_viewport_io_outbound(pp);
}
return ret;

@ -0,0 +1,59 @@
From: Pratyush Anand <pratyush.anand@st.com>
pp->io_base which is the input of the outbound IO address translation
unit should be the cpu address, it was programmed wrongly to realio
address.
We should pass global_io_offset rather than sys->io_offset to
pci_ioremap_io, so we map the new window into the first available spot
in the Linux view of the I/O space.
We must also pass cpu address instead of realio address to
pci_ioremap_io.
This patch fixes above issue. It has been tested with Lecroy PTC in AIC
mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
otherwise.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Tested-by: Mohit Kumar <mohit.kumar@st.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
Cc: linux-pci@vger.kernel.org
Cc: spear-devel@list.st.com
---
drivers/pci/host/pcie-designware.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
http://thread.gmane.org/gmane.linux.kernel.pci/27204
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
+ global_io_offset);
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
+ pp->io_base = range.cpu_addr;
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
pp->cfg0_base = pp->cfg.start;
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
- pp->io_base = pp->io.start;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
- pci_ioremap_io(sys->io_offset, pp->io.start);
+ pci_ioremap_io(global_io_offset, pp->io_base);
global_io_offset += SZ_64K;
pci_add_resource_offset(&sys->resources, &pp->io,
sys->io_offset);
Loading…
Cancel
Save