ath25: switch from uci-defaults to board.d

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47756
master
Jo-Philipp Wich 9 years ago
parent 5ebc5de49d
commit 1e4478e83a
  1. 13
      target/linux/ath25/base-files/etc/board.d/01_leds
  2. 28
      target/linux/ath25/base-files/etc/board.d/02_network
  3. 11
      target/linux/ath25/base-files/etc/uci-defaults/01_leds
  4. 45
      target/linux/ath25/base-files/etc/uci-defaults/02_network

@ -0,0 +1,13 @@
#!/bin/sh
# Copyright 2012-2015 OpenWrt.org
#
. /lib/functions/uci-defaults-new.sh
board_config_update
ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
board_config_flush
exit 0

@ -0,0 +1,28 @@
#!/bin/sh
. /lib/functions/uci-defaults-new.sh
board_config_update
if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
-e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
[ -x /sbin/swconfig ];
then
ucidef_add_switch "eth0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
elif [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ];
then
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
elif [ -d /sys/class/net/eth1 ]; then
ucidef_set_interfaces_lan_wan "eth0" "eth1"
else
ucidef_set_interface_lan "eth0"
fi
board_config_flush
exit 0

@ -1,11 +0,0 @@
#!/bin/sh
# Copyright 2012 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
ucidef_set_led_netdev "wlan" "wlan" "wlan" "wlan0"
ucidef_commit_leds
exit 0

@ -1,45 +0,0 @@
#!/bin/sh
if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
-e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/0:00" ] && \
[ -x /sbin/swconfig ];
then
uci batch <<EOF
set network.eth0=switch
set network.eth0.name=eth0
set network.eth0.reset=1
set network.eth0.enable_vlan=1
set network.eth0_1=switch_vlan
set network.eth0_1.device=eth0
set network.eth0_1.vlan=1
set network.eth0_1.ports="0 1 2 3 5t"
set network.eth0_2=switch_vlan
set network.eth0_2.device=eth0
set network.eth0_2.vlan=2
set network.eth0_2.ports="4 5t"
EOF
HAS_SWITCH=1
fi
if [ -n "$HAS_SWITCH" -o \
-e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
uci batch <<EOF
set network.lan.ifname=eth0.1
set network.wan=interface
set network.wan.ifname=eth0.2
set network.wan.proto=dhcp
commit network
EOF
HAS_SWITCH=1
fi
[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
uci batch <<EOF
set network.wan=interface
set network.wan.ifname=eth1
set network.wan.proto=dhcp
commit network
EOF
}
uci commit network
Loading…
Cancel
Save