change switch config to swconfig style format to remain consistent accross platforms

SVN-Revision: 18425
master
Jo-Philipp Wich 15 years ago
parent ba6e615cae
commit 194f32bc26
  1. 55
      package/switch/files/switch.sh
  2. 18
      target/linux/brcm-2.4/base-files/etc/init.d/netconfig

@ -1,33 +1,38 @@
#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
# Copyright (C) 2006-2009 OpenWrt.org
setup_switch_hw() {
local dev="$1"
local enable reset evlan
config_get_bool enable "$dev" enable 1
config_get_bool evlan "$dev" enable_vlan 1
config_get_bool reset "$dev" reset 1
local proc="/proc/switch/$dev"
[ -d "$proc" ] && {
echo "$reset" > "$proc/reset"
echo "$evlan" > "$proc/enable_vlan"
echo "$enable" > "$proc/enable"
}
}
setup_switch_vlan() {
DIR="/proc/switch/$CONFIG_SECTION/vlan/$1"
[ -d "$DIR" ] || return 0
config_get ports "$CONFIG_SECTION" "vlan$1"
echo "$ports" > "$DIR/ports"
local s="$1"
local dev vlan ports
config_get dev "$s" device
config_get vlan "$s" vlan
config_get ports "$s" ports
[ -n "$dev" ] && [ -n "$vlan" ] && {
local proc="/proc/switch/$dev/vlan/$vlan/ports"
[ -f "$proc" ] && echo "$ports" > "$proc"
}
}
setup_switch() {
config_cb() {
case "$1" in
switch)
[ -n "$2" -a -d "/proc/switch/$2" ] && {
echo 1 > "/proc/switch/$2/reset"
echo 1 > "/proc/switch/$2/enable"
echo 1 > "/proc/switch/$2/enable_vlan"
option_cb() {
case "$1" in
vlan*) setup_switch_vlan "${1##vlan}";;
esac
}
}
;;
*)
option_cb() { return 0; }
;;
esac
}
config_load network
config_foreach setup_switch_hw switch
config_foreach setup_switch_vlan switch_vlan
}

@ -20,6 +20,16 @@ start() {
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
function vlan(id, name) {
if (c[name] != "") {
print "config switch_vlan eth0_" id
print " option device \"eth0\""
print " option vlan " id
print " option ports \"" c[name] "\""
print ""
}
}
function macinc(mac, maca, i, result) {
split(mac, maca, ":")
for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
@ -165,10 +175,10 @@ start() {
if (c["vlan0ports"] || c["vlan1ports"]) {
print "#### VLAN configuration "
print "config switch eth0"
p("vlan0", "vlan0ports")
p("vlan1", "vlan1ports")
print ""
print ""
print " option enable 1"
print ""
vlan(0, "vlan0ports")
vlan(1, "vlan1ports")
}
print "#### Loopback configuration"
print "config interface loopback"

Loading…
Cancel
Save