iw: add support for the new survey data

SVN-Revision: 23351
master
Felix Fietkau 14 years ago
parent bbf2a906b6
commit 1931868927
  1. 118
      package/iw/patches/001-nl80211_sync.patch
  2. 13
      package/iw/patches/100-survey_freq_in_use.patch
  3. 32
      package/iw/patches/110-survey_phy_stats.patch

@ -11,7 +11,35 @@
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
* determined by the STATUS_CODE attribute.
@@ -686,6 +688,15 @@ enum nl80211_commands {
@@ -313,8 +315,8 @@
* channel for the specified amount of time. This can be used to do
* off-channel operations like transmit a Public Action frame and wait for
* a response while being associated to an AP on another channel.
- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
- * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
* frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
* optionally used to specify additional channel parameters.
* %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
@@ -385,6 +387,8 @@
* of any other interfaces, and other interfaces will again take
* precedence when they are used.
*
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -487,6 +491,7 @@ enum nl80211_commands {
NL80211_CMD_NOTIFY_CQM,
NL80211_CMD_SET_CHANNEL,
+ NL80211_CMD_SET_WDS_PEER,
/* add new commands above here */
@@ -686,6 +691,15 @@ enum nl80211_commands {
* request, the driver will assume that the port is unauthorized until
* authorized by user space. Otherwise, port is marked authorized by
* default in station mode.
@ -27,17 +55,29 @@
*
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
* We recommend using nested, driver-specific attributes within this.
@@ -951,6 +962,9 @@ enum nl80211_attrs {
@@ -787,6 +801,9 @@ enum nl80211_commands {
* This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
* for non-automatic settings.
*
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ * means support for per-station GTKs.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -951,6 +968,11 @@ enum nl80211_attrs {
NL80211_ATTR_RX_FRAME_TYPES,
NL80211_ATTR_FRAME_TYPE,
+ NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+ NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+ NL80211_ATTR_SUPPORT_IBSS_RSN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1006,6 +1020,8 @@ enum nl80211_attrs {
@@ -1006,6 +1028,8 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_WDS: wireless distribution interface
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
@ -46,7 +86,7 @@
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
* @NUM_NL80211_IFTYPES: number of defined interface types
*
@@ -1022,6 +1038,8 @@ enum nl80211_iftype {
@@ -1022,6 +1046,8 @@ enum nl80211_iftype {
NL80211_IFTYPE_WDS,
NL80211_IFTYPE_MONITOR,
NL80211_IFTYPE_MESH_POINT,
@ -55,19 +95,85 @@
/* keep last */
NUM_NL80211_IFTYPES,
@@ -1382,6 +1400,7 @@ enum nl80211_reg_rule_flags {
@@ -1111,6 +1137,8 @@ enum nl80211_rate_info {
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
* station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
*/
enum nl80211_sta_info {
__NL80211_STA_INFO_INVALID,
@@ -1124,6 +1152,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_TX_BITRATE,
NL80211_STA_INFO_RX_PACKETS,
NL80211_STA_INFO_TX_PACKETS,
+ NL80211_STA_INFO_TX_RETRIES,
+ NL80211_STA_INFO_TX_FAILED,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -1382,6 +1412,17 @@ enum nl80211_reg_rule_flags {
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+ * spent on this channel
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * channel was sensed busy
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+ * receiving data
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+ * transmitting data
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -1390,6 +1409,7 @@ enum nl80211_survey_info {
@@ -1390,6 +1431,12 @@ enum nl80211_survey_info {
__NL80211_SURVEY_INFO_INVALID,
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
+ NL80211_SURVEY_INFO_IN_USE,
+ NL80211_SURVEY_INFO_CHANNEL_TIME,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+ NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -1636,11 +1683,14 @@ enum nl80211_auth_type {
* @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
* @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
* @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
*/
enum nl80211_key_type {
NL80211_KEYTYPE_GROUP,
NL80211_KEYTYPE_PAIRWISE,
NL80211_KEYTYPE_PEERKEY,
+
+ NUM_NL80211_KEYTYPES
};
/**
@@ -1671,6 +1721,9 @@ enum nl80211_wpa_versions {
* CCMP keys, each six bytes in little endian
* @NL80211_KEY_DEFAULT: flag indicating default key
* @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ * specified the default depends on whether a MAC address was
+ * given with the command using the key or not (u32)
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
@@ -1682,6 +1735,7 @@ enum nl80211_key_attributes {
NL80211_KEY_SEQ,
NL80211_KEY_DEFAULT,
NL80211_KEY_DEFAULT_MGMT,
+ NL80211_KEY_TYPE,
/* keep last */
__NL80211_KEY_AFTER_LAST,

@ -1,11 +1,14 @@
--- a/survey.c
+++ b/survey.c
@@ -46,6 +46,8 @@ static int print_survey_handler(struct n
@@ -44,8 +44,9 @@ static int print_survey_handler(struct n
}
if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
printf("\tfrequency:\t%u MHz\n",
nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
+ if (sinfo[NL80211_SURVEY_INFO_IN_USE])
+ printf("\tin use\n");
- printf("\tfrequency:\t%u MHz\n",
- nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
+ printf("\tfrequency:\t%u MHz%s\n",
+ nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
+ sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
if (sinfo[NL80211_SURVEY_INFO_NOISE])
printf("\tnoise:\t\t%d dBm\n",
(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));

@ -0,0 +1,32 @@
--- a/survey.c
+++ b/survey.c
@@ -44,12 +44,27 @@ static int print_survey_handler(struct n
}
if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
- printf("\tfrequency:\t%u MHz%s\n",
+ printf("\tfrequency:\t\t\t%u MHz%s\n",
nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
if (sinfo[NL80211_SURVEY_INFO_NOISE])
- printf("\tnoise:\t\t%d dBm\n",
+ printf("\tnoise:\t\t\t\t%d dBm\n",
(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
+ printf("\tchannel active time:\t\t%lld ms\n",
+ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
+ printf("\tchannel busy time:\t\t%lld ms\n",
+ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
+ printf("\textension channel busy time:\t%lld ms\n",
+ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
+ printf("\tchannel receive time:\t\t%lld ms\n",
+ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
+ printf("\tchannel transmit time:\t\t%lld ms\n",
+ (int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
return NL_SKIP;
}
Loading…
Cancel
Save