ramips: add support for ZyXEL Keenetic Omni / Omni II

Factory image can be installed via Zyxel WebUI.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
master
Vitaly Chekryzhev 8 years ago committed by John Crispin
parent 83eca5d8b7
commit 190ee7d86b
  1. 2
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 5
      target/linux/ramips/base-files/etc/board.d/02_network
  3. 2
      target/linux/ramips/base-files/etc/diag.sh
  4. 6
      target/linux/ramips/base-files/lib/ramips.sh
  5. 2
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  6. 120
      target/linux/ramips/dts/kn_rc.dts
  7. 120
      target/linux/ramips/dts/kn_rf.dts
  8. 20
      target/linux/ramips/image/mt7620.mk

@ -207,6 +207,8 @@ ht-tm02)
ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
set_wifi_led "$board:blue:wlan"
;;
kn_rc|\
kn_rf|\
kng_rc)
set_usb_led "$board:green:usb"
set_wifi_led "$board:green:wifi"

@ -203,6 +203,11 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
;;
kn_rc|\
kn_rf)
ucidef_add_switch "switch" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
;;
kng_rc)
ucidef_add_switch "switch1" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"

@ -24,6 +24,8 @@ get_status_led() {
dir-860l-b1|\
e1700|\
fonera20n|\
kn_rc|\
kn_rf|\
kng_rc|\
mzk-750dhp|\
mzk-dp150n|\

@ -595,6 +595,12 @@ ramips_board_detect() {
*"ZBT-WR8305RT")
name="zbt-wr8305rt"
;;
*"ZyXEL Keenetic Omni")
name="kn_rc"
;;
*"ZyXEL Keenetic Omni II")
name="kn_rf"
;;
*"ZyXEL Keenetic Viva")
name="kng_rc"
;;

@ -71,6 +71,8 @@ platform_check_image() {
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
kn_rc|\
kn_rf|\
kng_rc|\
linkits7688|\
linkits7688d|\

@ -0,0 +1,120 @@
/dts-v1/;
#include "mt7620n.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ZyXEL Keenetic Omni";
gpio-leds {
compatible = "gpio-leds";
wan {
label = "kn_rc:green:wan";
gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
};
usb {
label = "kn_rc:green:usb";
gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
};
wifi {
label = "kn_rc:green:wifi";
gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
};
power {
label = "kn_rc:green:power";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
fn {
label = "fn";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};

@ -0,0 +1,120 @@
/dts-v1/;
#include "mt7620n.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ZyXEL Keenetic Omni II";
gpio-leds {
compatible = "gpio-leds";
wan {
label = "kn_rc:green:wan";
gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
};
usb {
label = "kn_rc:green:usb";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
wifi {
label = "kn_rc:green:wifi";
gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
};
power {
label = "kn_rc:green:power";
gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
fn {
label = "fn";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};

@ -430,6 +430,26 @@ define Device/dch-m225
endef
TARGET_DEVICES += dch-m225
define Device/kn_rc
DTS := kn_rc
DEVICE_TITLE := ZyXEL Keenetic Omni
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
zyimage -d 4882 -v "ZyXEL Keenetic Omni"
endef
TARGET_DEVICES += kn_rc
define Device/kn_rf
DTS := kn_rf
DEVICE_TITLE := ZyXEL Keenetic Omni II
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
endef
TARGET_DEVICES += kn_rf
define Device/kng_rc
DTS := kng_rc
IMAGE_SIZE := $(ralink_default_fw_size_16M)

Loading…
Cancel
Save