jz4740 pm: Fix gpio suspend/resume. Turn pll off while in suspend and gate clocks off which arn't handeld by their subsystems yet.

SVN-Revision: 19984

target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c

@@ -321,7 +321,7 @@ static int __init n526_board_setup(void)
 	if (jz_gpiolib_init())
 		panic("Failed to initalize jz gpio\n");
 
-	jz4740_init_clocks();
+	jz4740_clock_init();
 	board_gpio_setup();
 
 	if (n526_init_platform_devices())

target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c

@@ -412,7 +412,7 @@ static int __init qi_lb60_board_setup(void)
 	if (jz_gpiolib_init())
 		panic("Failed to initalize jz gpio\n");
 
-	jz_init_clocks();
+	jz4740_clock_init();
 	board_gpio_setup();
 
 	if (qi_lb60_init_platform_devices())

target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c

@@ -158,7 +158,7 @@ static int jz_clk_enable_gating(struct clk *clk)
 {
 	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
 		return -EINVAL;
-	
+
 	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
 	return 0;
 }
@@ -873,7 +873,24 @@ void jz4740_clock_udc_enable_auto_suspend(void)
 }
 EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend);
 
-int jz_init_clocks(void)
+void jz4740_clock_suspend(void)
+{
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE,
+		JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
+
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
+}
+
+void jz4740_clock_resume(void)
+{
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
+	while ((jz_clk_reg_read(JZ_REG_CLOCK_PLL) & JZ_CLOCK_PLL_STABLE) == 0);
+
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE,
+		JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
+}
+
+int jz4740_clock_init(void)
 {
 	uint32_t val;
 
@@ -905,5 +922,3 @@ int jz_init_clocks(void)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(jz_init_clocks);
-

target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.h

@@ -23,7 +23,9 @@ struct jz4740_clock_board_data {
 
 extern struct jz4740_clock_board_data jz4740_clock_bdata;
 
-int jz_init_clocks(void);
+int jz4740_clock_init(void);
+void jz4740_clock_suspend(void);
+void jz4740_clock_resume(void);
 
 struct clk;
 

target/linux/xburst/files-2.6.32/arch/mips/jz4740/gpio.c

@@ -106,6 +106,7 @@ int jz_gpio_set_function(int gpio, enum jz_gpio_function function)
 		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
 	} else {
 		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_SET);
+		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
 		switch (function) {
 		case JZ_GPIO_FUNC1:
 			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
@@ -164,7 +165,8 @@ void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num
 
 	for (i = 0; i < num; ++i, ++request) {
 		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
-		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_SET);
+		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_CLEAR);
+		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_PULL_SET);
 	}
 }
 EXPORT_SYMBOL_GPL(jz_gpio_bulk_suspend);
@@ -431,20 +433,35 @@ static struct jz_gpio_chip jz_gpio_chips[] = {
 	JZ_GPIO_CHIP(D),
 };
 
-static int jz_gpio_suspend(struct sys_device *dev, pm_message_t state)
+int jz_gpio_suspend(void)
 {
 	struct jz_gpio_chip *chip = jz_gpio_chips;
 	int i, gpio;
+
 	for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
 		gpio = chip->gpio_chip.base;
 		chip->suspend_mask = readl(GPIO_TO_REG(gpio, JZ_REG_GPIO_MASK));
 		writel(~(chip->wakeup), GPIO_TO_REG(gpio, JZ_REG_GPIO_MASK_SET));
 	}
 
+	chip = jz_gpio_chips;
+#if 0
+	for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
+		printk("GPIO %d: \n", i);
+		printk("\tPin: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_PIN)));
+		printk("\tData: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DATA)));
+		printk("\tPull: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_PULL)));
+		printk("\tFunc: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_FUNC)));
+		printk("\tSelect: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_SELECT)));
+		printk("\tDirection: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_DIRECTION)));
+		printk("\tTrigger: %.8x\n", readl(CHIP_TO_REG(&chip->gpio_chip, JZ_REG_GPIO_TRIGGER)));
+	}
+#endif
+
 	return 0;
 }
 
-static int jz_gpio_resume(struct sys_device *dev)
+int jz_gpio_resume(void)
 {
 	struct jz_gpio_chip *chip = jz_gpio_chips;
 	int i;
@@ -455,12 +472,6 @@ static int jz_gpio_resume(struct sys_device *dev)
 	return 0;
 }
 
-static struct sysdev_class jz_gpio_sysdev = {
-	.name = "JZ4740 GPIO",
-	.suspend = jz_gpio_suspend,
-	.resume = jz_gpio_resume,
-};
-
 int __init jz_gpiolib_init(void)
 {
 	struct jz_gpio_chip *chip = jz_gpio_chips;
@@ -480,11 +491,7 @@ int __init jz_gpiolib_init(void)
 		}
 	}
 
-	sysdev_class_register(&jz_gpio_sysdev);
-
 	printk("JZ GPIO initalized\n");
 
 	return 0;
 }
-
-

target/linux/xburst/files-2.6.32/arch/mips/jz4740/pm.c

@@ -20,12 +20,18 @@
 #include <asm/mach-jz4740/regs.h>
 #include <asm/mach-jz4740/clock.h>
 
+#include "clock.h"
+
 extern void jz4740_intc_suspend(void);
 extern void jz4740_intc_resume(void);
+extern void jz_gpio_suspend(void);
+extern void jz_gpio_resume(void);
 
 static int jz_pm_enter(suspend_state_t state)
 {
+	jz_gpio_suspend();
 	jz4740_intc_suspend();
+	jz4740_clock_suspend();
 
 	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
 
@@ -35,7 +41,9 @@ static int jz_pm_enter(suspend_state_t state)
 
 	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
 
+	jz4740_clock_resume();
 	jz4740_intc_resume();
+	jz_gpio_resume();
 
 	return 0;
 }