TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>master
parent
e39a240ba2
commit
14951e8f8e
@ -0,0 +1,94 @@ |
||||
/dts-v1/; |
||||
|
||||
#include "TPLINK-8M.dtsi" |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
compatible = "tplink,c50-v3", "mediatek,mt7628an-soc"; |
||||
model = "TP-Link Archer C50 v3"; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <20>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
|
||||
rfkill { |
||||
label = "rfkill"; |
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RFKILL>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
lan { |
||||
label = "c50-v3:green:lan"; |
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
power { |
||||
label = "c50-v3:green:power"; |
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wan { |
||||
label = "c50-v3:green:wan"; |
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wan_orange { |
||||
label = "c50-v3:orange:wan"; |
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wlan { |
||||
label = "c50-v3:green:wlan2g"; |
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wlan5 { |
||||
label = "c50-v3:green:wlan5g"; |
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "c50-v3:green:wps"; |
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
state_default: pinctrl0 { |
||||
gpio { |
||||
ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an", |
||||
"p3led_an", "p4led_an", "wdt", "wled_an"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
|
||||
pcie-bridge { |
||||
mt76@0,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
device_type = "pci"; |
||||
mediatek,mtd-eeprom = <&factory 0x28000>; |
||||
ieee80211-freq-limit = <5000000 6000000>; |
||||
mtd-mac-address = <&factory 0xf100>; |
||||
mtd-mac-address-increment = <(-1)>; |
||||
}; |
||||
}; |
||||
}; |
Loading…
Reference in new issue