parent
9bfca5ce18
commit
128bb0967a
@ -0,0 +1,206 @@ |
||||
/*
|
||||
* ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver |
||||
* Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007 |
||||
* |
||||
* based on |
||||
* |
||||
* RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License |
||||
* as published by the Free Software Foundation; either version |
||||
* 2 of the License, or (at your option) any later version. |
||||
* |
||||
*/ |
||||
|
||||
#include <linux/module.h> |
||||
#include <linux/types.h> |
||||
#include <linux/fs.h> |
||||
#include <linux/miscdevice.h> |
||||
#include <linux/watchdog.h> |
||||
|
||||
#include <asm/bootinfo.h> |
||||
|
||||
#include <adm5120_info.h> |
||||
#include <adm5120_defs.h> |
||||
#include <adm5120_irq.h> |
||||
#include <adm5120_switch.h> |
||||
|
||||
|
||||
#define DEFAULT_TIMEOUT 15 /* (secs) Default is 15 seconds */ |
||||
#define MAX_TIMEOUT 327 |
||||
/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */ |
||||
|
||||
#define NAME "adm5120_wdt" |
||||
#define VERSION "0.1" |
||||
|
||||
static int expect_close = 0; |
||||
static int access = 0; |
||||
static unsigned int timeout = DEFAULT_TIMEOUT; |
||||
|
||||
static int nowayout = WATCHDOG_NOWAYOUT; |
||||
module_param(nowayout, int, 0); |
||||
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
||||
MODULE_LICENSE("GPL"); |
||||
|
||||
|
||||
static inline void wdt_set_timeout(void) |
||||
{ |
||||
u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16); |
||||
SW_WRITE_REG(SWITCH_REG_WDOG0, val); |
||||
} |
||||
|
||||
/*
|
||||
It looks like WDOG0-register-write don't modify counter, |
||||
but WDOG0-register-read resets counter. |
||||
*/ |
||||
|
||||
static inline void wdt_reset_counter(void) |
||||
{ |
||||
SW_READ_REG(SWITCH_REG_WDOG0); |
||||
} |
||||
|
||||
static inline void wdt_disable(void) |
||||
{ |
||||
SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000); |
||||
} |
||||
|
||||
|
||||
|
||||
static int wdt_open(struct inode *inode, struct file *file) |
||||
{ |
||||
/* Allow only one person to hold it open */ |
||||
if (access) |
||||
return -EBUSY; |
||||
|
||||
if (nowayout) { |
||||
__module_get(THIS_MODULE); |
||||
} |
||||
|
||||
/* Activate timer */ |
||||
wdt_reset_counter(); |
||||
wdt_set_timeout(); |
||||
printk(KERN_INFO NAME ": enabling watchdog timer\n"); |
||||
access = 1; |
||||
return 0; |
||||
} |
||||
|
||||
static int wdt_release(struct inode *inode, struct file *file) |
||||
{ |
||||
/*
|
||||
* Shut off the timer. |
||||
* Lock it in if it's a module and we set nowayout |
||||
*/ |
||||
if (expect_close && (nowayout == 0)) { |
||||
wdt_disable(); |
||||
printk(KERN_INFO NAME ": disabling watchdog timer\n"); |
||||
module_put(THIS_MODULE); |
||||
} else { |
||||
printk(KERN_CRIT NAME ": device closed unexpectedly. WDT will not stop!\n"); |
||||
} |
||||
access = 0; |
||||
return 0; |
||||
} |
||||
|
||||
static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) |
||||
{ |
||||
/* Refresh the timer. */ |
||||
if (len) { |
||||
if (!nowayout) { |
||||
size_t i; |
||||
|
||||
/* In case it was set long ago */ |
||||
expect_close = 0; |
||||
|
||||
for (i = 0; i != len; i++) { |
||||
char c; |
||||
if (get_user(c, data + i)) |
||||
return -EFAULT; |
||||
if (c == 'V') |
||||
expect_close = 1; |
||||
} |
||||
} |
||||
wdt_reset_counter(); |
||||
return len; |
||||
} |
||||
return 0; |
||||
} |
||||
|
||||
static int wdt_ioctl(struct inode *inode, struct file *file, |
||||
unsigned int cmd, unsigned long arg) |
||||
{ |
||||
int new_timeout; |
||||
static struct watchdog_info ident = { |
||||
.options = WDIOF_SETTIMEOUT | |
||||
WDIOF_KEEPALIVEPING | |
||||
WDIOF_MAGICCLOSE, |
||||
.firmware_version = 0, |
||||
.identity = "ADM5120_WDT Watchdog", |
||||
}; |
||||
switch (cmd) { |
||||
default: |
||||
return -ENOTTY; |
||||
case WDIOC_GETSUPPORT: |
||||
if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) |
||||
return -EFAULT; |
||||
return 0; |
||||
case WDIOC_GETSTATUS: |
||||
case WDIOC_GETBOOTSTATUS: |
||||
return put_user(0,(int *)arg); |
||||
case WDIOC_KEEPALIVE: |
||||
wdt_reset_counter(); |
||||
return 0; |
||||
case WDIOC_SETTIMEOUT: |
||||
if (get_user(new_timeout, (int *)arg)) |
||||
return -EFAULT; |
||||
if (new_timeout < 1) |
||||
return -EINVAL; |
||||
if (new_timeout > MAX_TIMEOUT) |
||||
return -EINVAL; |
||||
timeout = new_timeout; |
||||
wdt_set_timeout(); |
||||
/* Fall */ |
||||
case WDIOC_GETTIMEOUT: |
||||
return put_user(timeout, (int *)arg); |
||||
} |
||||
} |
||||
|
||||
static struct file_operations wdt_fops = { |
||||
owner: THIS_MODULE, |
||||
llseek: no_llseek, |
||||
write: wdt_write, |
||||
ioctl: wdt_ioctl, |
||||
open: wdt_open, |
||||
release: wdt_release, |
||||
}; |
||||
|
||||
static struct miscdevice wdt_miscdev = { |
||||
minor: WATCHDOG_MINOR, |
||||
name: "watchdog", |
||||
fops: &wdt_fops, |
||||
}; |
||||
|
||||
static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n"; |
||||
|
||||
static int __init watchdog_init(void) |
||||
{ |
||||
int ret; |
||||
|
||||
ret = misc_register(&wdt_miscdev); |
||||
|
||||
if (ret) |
||||
return ret; |
||||
|
||||
wdt_disable(); |
||||
printk(banner); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static void __exit watchdog_exit(void) |
||||
{ |
||||
misc_deregister(&wdt_miscdev); |
||||
} |
||||
|
||||
module_init(watchdog_init); |
||||
module_exit(watchdog_exit); |
@ -0,0 +1,25 @@ |
||||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public |
||||
* License. See the file "COPYING" in the main directory of this archive |
||||
* for more details. |
||||
* |
||||
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> |
||||
*/ |
||||
#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H |
||||
#define __ASM_MIPS_MACH_ADM5120_WAR_H |
||||
|
||||
#define R4600_V1_INDEX_ICACHEOP_WAR 0 |
||||
#define R4600_V1_HIT_CACHEOP_WAR 0 |
||||
#define R4600_V2_HIT_CACHEOP_WAR 0 |
||||
#define R5432_CP0_INTERRUPT_WAR 0 |
||||
#define BCM1250_M3_WAR 0 |
||||
#define SIBYTE_1956_WAR 0 |
||||
#define MIPS4K_ICACHE_REFILL_WAR 0 |
||||
#define MIPS_CACHE_SYNC_WAR 0 |
||||
#define TX49XX_ICACHE_INDEX_INV_WAR 0 |
||||
#define RM9000_CDEX_SMP_WAR 0 |
||||
#define ICACHE_REFILLS_WORKAROUND_WAR 0 |
||||
#define R10000_LLSC_WAR 0 |
||||
#define MIPS34K_MISSED_ITLB_WAR 0 |
||||
|
||||
#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */ |
@ -0,0 +1,117 @@ |
||||
Index: linux-2.6.24/arch/mips/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/arch/mips/Kconfig
|
||||
+++ linux-2.6.24/arch/mips/Kconfig
|
||||
@@ -16,6 +16,20 @@ choice
|
||||
prompt "System type"
|
||||
default SGI_IP22
|
||||
|
||||
+config MIPS_ADM5120
|
||||
+ bool "ADM5120 SoC based machines"
|
||||
+ select CEVT_R4K
|
||||
+ select CSRC_R4K
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select HW_HAS_PCI
|
||||
+ select IRQ_CPU
|
||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select GENERIC_GPIO
|
||||
+
|
||||
config MACH_ALCHEMY
|
||||
bool "Alchemy processor based machines"
|
||||
|
||||
@@ -689,6 +701,7 @@ config WR_PPMC
|
||||
|
||||
endchoice
|
||||
|
||||
+source "arch/mips/adm5120/Kconfig"
|
||||
source "arch/mips/au1000/Kconfig"
|
||||
source "arch/mips/jazz/Kconfig"
|
||||
source "arch/mips/lasat/Kconfig"
|
||||
Index: linux-2.6.24/arch/mips/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/arch/mips/Makefile
|
||||
+++ linux-2.6.24/arch/mips/Makefile
|
||||
@@ -166,6 +166,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
|
||||
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
|
||||
|
||||
#
|
||||
+# ADMtek 5120
|
||||
+#
|
||||
+
|
||||
+libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/
|
||||
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
|
||||
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/
|
||||
+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
|
||||
+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
|
||||
+
|
||||
+#
|
||||
# Common Alchemy Au1x00 stuff
|
||||
#
|
||||
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
|
||||
Index: linux-2.6.24/include/asm-mips/bootinfo.h
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/include/asm-mips/bootinfo.h
|
||||
+++ linux-2.6.24/include/asm-mips/bootinfo.h
|
||||
@@ -198,6 +198,58 @@
|
||||
#define MACH_GROUP_BRCM 23 /* Broadcom */
|
||||
#define MACH_BCM47XX 1 /* Broadcom BCM47XX */
|
||||
|
||||
+/*
|
||||
+ * Valid machtype for group ADMtek ADM5120
|
||||
+ */
|
||||
+#define MACH_ADM5120_GENERIC 0 /* Generic board */
|
||||
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
|
||||
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
|
||||
+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
|
||||
+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
|
||||
+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
|
||||
+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
|
||||
+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
|
||||
+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
|
||||
+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
|
||||
+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
|
||||
+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
|
||||
+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
|
||||
+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
|
||||
+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
|
||||
+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
|
||||
+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
|
||||
+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
|
||||
+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
|
||||
+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
|
||||
+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
|
||||
+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
|
||||
+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
|
||||
+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
|
||||
+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
|
||||
+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
|
||||
+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
|
||||
+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
|
||||
+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
|
||||
+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
|
||||
+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
|
||||
+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */
|
||||
+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */
|
||||
+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */
|
||||
+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */
|
||||
+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */
|
||||
+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */
|
||||
+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */
|
||||
+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */
|
||||
+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */
|
||||
+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */
|
||||
+#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */
|
||||
+#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */
|
||||
+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */
|
||||
+#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */
|
||||
+#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K/BR-6104KP */
|
||||
+#define MACH_ADM5120_RB_192 47 /* Mikrotik RouterBOARD 192 */
|
||||
+#define MACH_ADM5120_BR61x4WG 48 /* Edimax BR-6104Wg/BR-6114WG */
|
||||
+
|
||||
#define CL_SIZE COMMAND_LINE_SIZE
|
||||
|
||||
const char *get_system_type(void);
|
@ -0,0 +1,26 @@ |
||||
Index: linux-2.6.24/drivers/mtd/maps/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/maps/Kconfig
|
||||
+++ linux-2.6.24/drivers/mtd/maps/Kconfig
|
||||
@@ -597,5 +597,9 @@ config MTD_PLATRAM
|
||||
|
||||
This selection automatically selects the map_ram driver.
|
||||
|
||||
+config MTD_ADM5120
|
||||
+ tristate "Map driver for ADM5120 based boards"
|
||||
+ depends on MIPS_ADM5120
|
||||
+
|
||||
endmenu
|
||||
|
||||
Index: linux-2.6.24/drivers/mtd/maps/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/maps/Makefile
|
||||
+++ linux-2.6.24/drivers/mtd/maps/Makefile
|
||||
@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
|
||||
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
|
||||
obj-$(CONFIG_MTD_PCI) += pci.o
|
||||
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
|
||||
+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
|
||||
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
|
||||
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
|
||||
obj-$(CONFIG_MTD_IMPA7) += impa7.o
|
@ -0,0 +1,27 @@ |
||||
Index: linux-2.6.24/drivers/net/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/net/Kconfig
|
||||
+++ linux-2.6.24/drivers/net/Kconfig
|
||||
@@ -601,6 +601,10 @@ config MIPS_AU1X00_ENET
|
||||
If you have an Alchemy Semi AU1X00 based system
|
||||
say Y. Otherwise, say N.
|
||||
|
||||
+config MIPS_ADM5120_ENET
|
||||
+ tristate "MIPS ADM5120 Ethernet switch support"
|
||||
+ depends on MIPS_ADM5120
|
||||
+
|
||||
config SGI_IOC3_ETH
|
||||
bool "SGI IOC3 Ethernet"
|
||||
depends on PCI && SGI_IP27
|
||||
Index: linux-2.6.24/drivers/net/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/net/Makefile
|
||||
+++ linux-2.6.24/drivers/net/Makefile
|
||||
@@ -183,6 +183,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
|
||||
# This is also a 82596 and should probably be merged
|
||||
obj-$(CONFIG_LP486E) += lp486e.o
|
||||
|
||||
+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
|
||||
obj-$(CONFIG_ETH16I) += eth16i.o
|
||||
obj-$(CONFIG_ZORRO8390) += zorro8390.o
|
||||
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
|
@ -0,0 +1,33 @@ |
||||
Index: linux-2.6.24/drivers/mtd/nand/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/nand/Kconfig
|
||||
+++ linux-2.6.24/drivers/mtd/nand/Kconfig
|
||||
@@ -81,6 +81,16 @@ config MTD_NAND_TS7250
|
||||
help
|
||||
Support for NAND flash on Technologic Systems TS-7250 platform.
|
||||
|
||||
+config MTD_NAND_ADM5120
|
||||
+ tristate "ADM5120 NAND support"
|
||||
+ depends on MTD_NAND && MIPS_ADM5120
|
||||
+ help
|
||||
+ This enables the driver for the ADM5120 SoC built-in
|
||||
+ NAND flash interface.
|
||||
+
|
||||
+ No board specific support is done by this driver, each board
|
||||
+ must advertise a platform_device for the driver to attach.
|
||||
+
|
||||
config MTD_NAND_IDS
|
||||
tristate
|
||||
|
||||
Index: linux-2.6.24/drivers/mtd/nand/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/nand/Makefile
|
||||
+++ linux-2.6.24/drivers/mtd/nand/Makefile
|
||||
@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan
|
||||
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
|
||||
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
|
||||
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
|
||||
+obj-$(CONFIG_MTD_NAND_ADM5120) += adm5120-nand.o
|
||||
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
|
||||
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
|
||||
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
|
@ -0,0 +1,35 @@ |
||||
Index: linux-2.6.24/drivers/usb/host/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/usb/host/Kconfig
|
||||
+++ linux-2.6.24/drivers/usb/host/Kconfig
|
||||
@@ -261,3 +261,6 @@ config USB_R8A66597_HCD
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called r8a66597-hcd.
|
||||
|
||||
+config USB_ADM5120_HCD
|
||||
+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
|
||||
+ depends on USB && MIPS_ADM5120 && EXPERIMENTAL
|
||||
Index: linux-2.6.24/drivers/usb/host/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/usb/host/Makefile
|
||||
+++ linux-2.6.24/drivers/usb/host/Makefile
|
||||
@@ -8,6 +8,7 @@ endif
|
||||
|
||||
obj-$(CONFIG_PCI) += pci-quirks.o
|
||||
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
||||
Index: linux-2.6.24/drivers/usb/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/usb/Makefile
|
||||
+++ linux-2.6.24/drivers/usb/Makefile
|
||||
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_SL811_HCD) += host/
|
||||
obj-$(CONFIG_USB_U132_HCD) += host/
|
||||
obj-$(CONFIG_USB_R8A66597_HCD) += host/
|
||||
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
|
||||
|
||||
obj-$(CONFIG_USB_ACM) += class/
|
||||
obj-$(CONFIG_USB_PRINTER) += class/
|
@ -0,0 +1,38 @@ |
||||
Index: linux-2.6.24/drivers/leds/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/leds/Kconfig
|
||||
+++ linux-2.6.24/drivers/leds/Kconfig
|
||||
@@ -18,6 +18,21 @@ config LEDS_CLASS
|
||||
|
||||
comment "LED drivers"
|
||||
|
||||
+config LEDS_ADM5120
|
||||
+ tristate "LED Support for ADM5120 GPIO LEDs"
|
||||
+ depends on LEDS_GPIO && MIPS_ADM5120
|
||||
+ help
|
||||
+ This option enables support for LEDs connected to GPIO lines
|
||||
+ on ADM5120 SoC based platforms.
|
||||
+
|
||||
+config LEDS_ADM5120_EXPERIMENTAL
|
||||
+ bool "Enable ADM5120 LEDs experimental code"
|
||||
+ depends on LEDS_ADM5120
|
||||
+
|
||||
+config LEDS_ADM5120_DIAG
|
||||
+ bool "Enable ADM5120 LEDs diagnostic mode"
|
||||
+ depends on LEDS_ADM5120
|
||||
+
|
||||
config LEDS_CORGI
|
||||
tristate "LED Support for the Sharp SL-C7x0 series"
|
||||
depends on LEDS_CLASS && PXA_SHARP_C7xx
|
||||
Index: linux-2.6.24/drivers/leds/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/leds/Makefile
|
||||
+++ linux-2.6.24/drivers/leds/Makefile
|
||||
@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
|
||||
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
|
||||
|
||||
# LED Platform Drivers
|
||||
+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o
|
||||
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
|
||||
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
|
||||
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
|
@ -0,0 +1,23 @@ |
||||
Index: linux-2.6.24/arch/mips/pci/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/arch/mips/pci/Makefile
|
||||
+++ linux-2.6.24/arch/mips/pci/Makefile
|
||||
@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
|
||||
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
|
||||
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
|
||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
+obj-$(CONFIG_PCI_ADM5120) += pci-adm5120.o
|
||||
Index: linux-2.6.24/include/linux/pci_ids.h
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/include/linux/pci_ids.h
|
||||
+++ linux-2.6.24/include/linux/pci_ids.h
|
||||
@@ -1703,6 +1703,9 @@
|
||||
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
|
||||
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
|
||||
|
||||
+#define PCI_VENDOR_ID_ADMTEK 0x1317
|
||||
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
|
||||
+
|
||||
#define PCI_VENDOR_ID_SIIG 0x131f
|
||||
#define PCI_SUBVENDOR_ID_SIIG 0x131f
|
||||
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
|
@ -0,0 +1,53 @@ |
||||
Index: linux-2.6.24/drivers/serial/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/serial/Makefile
|
||||
+++ linux-2.6.24/drivers/serial/Makefile
|
||||
@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)
|
||||
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
|
||||
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
|
||||
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
|
||||
+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
|
||||
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
|
||||
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
|
||||
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
|
||||
Index: linux-2.6.24/include/linux/serial_core.h
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/include/linux/serial_core.h
|
||||
+++ linux-2.6.24/include/linux/serial_core.h
|
||||
@@ -150,6 +150,9 @@
|
||||
#define PORT_MCF 78
|
||||
|
||||
|
||||
+/* ADMtek ADM5120 SoC */
|
||||
+#define PORT_ADM5120 77
|
||||
+
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#include <linux/compiler.h>
|
||||
Index: linux-2.6.24/drivers/serial/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/serial/Kconfig
|
||||
+++ linux-2.6.24/drivers/serial/Kconfig
|
||||
@@ -280,6 +280,22 @@ config SERIAL_8250_RM9K
|
||||
|
||||
comment "Non-8250 serial port support"
|
||||
|
||||
+config SERIAL_ADM5120
|
||||
+ bool "ADM5120 serial port support"
|
||||
+ depends on MIPS_ADM5120
|
||||
+ select SERIAL_CORE
|
||||
+ select SERIAL_CORE_CONSOLE
|
||||
+ help
|
||||
+ Driver for the on chip UARTs on the ADM5120 SoC
|
||||
+
|
||||
+config ADM5120_NR_UARTS
|
||||
+ int "Maximum number of ADM5120 serial ports"
|
||||
+ depends on SERIAL_ADM5120
|
||||
+ default "2"
|
||||
+ ---help---
|
||||
+ Set this to the number of serial ports you want the driver to
|
||||
+ support.
|
||||
+
|
||||
config SERIAL_AMBA_PL010
|
||||
tristate "ARM AMBA PL010 serial port support"
|
||||
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
|
@ -0,0 +1,26 @@ |
||||
Index: linux-2.6.24/drivers/leds/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/leds/Kconfig
|
||||
+++ linux-2.6.24/drivers/leds/Kconfig
|
||||
@@ -171,4 +171,12 @@ config LEDS_TRIGGER_MORSE
|
||||
tristate "LED Morse Trigger"
|
||||
depends on LEDS_TRIGGERS
|
||||
|
||||
+config LEDS_TRIGGER_ADM5120_SWITCH
|
||||
+ tristate "LED ADM5120 Switch Port Status Trigger"
|
||||
+ depends on LEDS_TRIGGERS && LEDS_ADM5120
|
||||
+ help
|
||||
+ This allows LEDs to be controlled by the port states of
|
||||
+ the ADM5120 built-in Ethernet Switch
|
||||
+ If unsure, say N.
|
||||
+
|
||||
endif # NEW_LEDS
|
||||
Index: linux-2.6.24/drivers/leds/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/leds/Makefile
|
||||
+++ linux-2.6.24/drivers/leds/Makefile
|
||||
@@ -27,3 +27,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledt
|
||||
obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
|
||||
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
|
||||
obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
|
||||
+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
|
@ -0,0 +1,39 @@ |
||||
Index: linux-2.6.24/drivers/mtd/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/Kconfig
|
||||
+++ linux-2.6.24/drivers/mtd/Kconfig
|
||||
@@ -160,6 +160,22 @@ config MTD_AFS_PARTS
|
||||
for your particular device. It won't happen automatically. The
|
||||
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
|
||||
|
||||
+config MTD_MYLOADER_PARTS
|
||||
+ tristate "MyLoader partition parsing"
|
||||
+ depends on MIPS_ADM5120 && MTD_PARTITIONS
|
||||
+ ---help---
|
||||
+ MyLoader is a bootloader which allows the user to define partitions
|
||||
+ in flash devices, by putting a table in the second erase block
|
||||
+ on the device, similar to a partition table. This table gives the
|
||||
+ offsets and lengths of the user defined partitions.
|
||||
+
|
||||
+ If you need code which can detect and parse these tables, and
|
||||
+ register MTD 'partitions' corresponding to each image detected,
|
||||
+ enable this option.
|
||||
+
|
||||
+ You will still need the parsing functions to be called by the driver
|
||||
+ for your particular device. It won't happen automatically.
|
||||
+
|
||||
comment "User Modules And Translation Layers"
|
||||
|
||||
config MTD_CHAR
|
||||
Index: linux-2.6.24/drivers/mtd/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/Makefile
|
||||
+++ linux-2.6.24/drivers/mtd/Makefile
|
||||
@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
|
||||
|
||||
# 'Users' - code which presents functionality to userspace.
|
||||
obj-$(CONFIG_MTD_CHAR) += mtdchar.o
|
@ -0,0 +1,95 @@ |
||||
Index: linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ linux-2.6.24/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -47,12 +47,19 @@
|
||||
#define MANUFACTURER_AMD 0x0001
|
||||
#define MANUFACTURER_ATMEL 0x001F
|
||||
#define MANUFACTURER_SST 0x00BF
|
||||
+#define MANUFACTURER_MACRONIX 0x00C2
|
||||
#define SST49LF004B 0x0060
|
||||
#define SST49LF040B 0x0050
|
||||
#define SST49LF008A 0x005a
|
||||
#define AT49BV6416 0x00d6
|
||||
#define MANUFACTURER_SAMSUNG 0x00ec
|
||||
|
||||
+/* Macronix */
|
||||
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
|
||||
+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
|
||||
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
|
||||
+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
|
||||
+
|
||||
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
||||
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct
|
||||
mtd->flags |= MTD_STUPID_LOCK;
|
||||
}
|
||||
|
||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+/*
|
||||
+ * Some Macronix chips has no/bad bootblock information in the CFI table
|
||||
+ */
|
||||
+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
|
||||
+{
|
||||
+ struct map_info *map = mtd->priv;
|
||||
+ struct cfi_private *cfi = map->fldrv_priv;
|
||||
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
|
||||
+ __u8 t;
|
||||
+
|
||||
+ switch (cfi->id) {
|
||||
+ /* TODO: put affected chip ids here */
|
||||
+ case MX29LV160B:
|
||||
+ case MX29LV320B:
|
||||
+ t = 2; /* Bottom boot */
|
||||
+ break;
|
||||
+ case MX29LV160T:
|
||||
+ case MX29LV320T:
|
||||
+ t = 3; /* Top boot */
|
||||
+ break;
|
||||
+ default:
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ if (extp->TopBottom == t)
|
||||
+ /* boot location detected by the CFI layer is correct */
|
||||
+ return;
|
||||
+
|
||||
+ extp->TopBottom = t;
|
||||
+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
|
||||
+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
|
||||
+}
|
||||
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
|
||||
+
|
||||
static struct cfi_fixup cfi_fixup_table[] = {
|
||||
#ifdef AMD_BOOTLOC_BUG
|
||||
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
|
||||
@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[
|
||||
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
|
||||
#endif
|
||||
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
|
||||
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
|
||||
+#endif
|
||||
{ 0, 0, NULL, NULL }
|
||||
};
|
||||
static struct cfi_fixup jedec_fixup_table[] = {
|
||||
Index: linux-2.6.24/drivers/mtd/chips/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/chips/Kconfig
|
||||
+++ linux-2.6.24/drivers/mtd/chips/Kconfig
|
||||
@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
|
||||
provides support for one of those command sets, used on chips
|
||||
including the AMD Am29LV320.
|
||||
|
||||
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
|
||||
+ bool "Fix boot-block location for Macronix flash chips"
|
||||
+ depends on MTD_CFI_AMDSTD
|
||||
+ help
|
||||
+ Some Macronix flash chips have no/wrong boot-block location in the
|
||||
+ CFI table, and the driver may detect the type incorrectly. Select
|
||||
+ this if your board has such chip.
|
||||
+
|
||||
config MTD_CFI_STAA
|
||||
tristate "Support for ST (Advanced Architecture) flash chips"
|
||||
depends on MTD_GEN_PROBE
|
@ -0,0 +1,74 @@ |
||||
Index: linux-2.6.24/drivers/mtd/chips/jedec_probe.c
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/chips/jedec_probe.c
|
||||
+++ linux-2.6.24/drivers/mtd/chips/jedec_probe.c
|
||||
@@ -121,6 +121,10 @@
|
||||
#define UPD29F064115 0x221C
|
||||
|
||||
/* PMC */
|
||||
+#define PM39LV512 0x001B
|
||||
+#define PM39LV010 0x001C
|
||||
+#define PM39LV020 0x003D
|
||||
+#define PM39LV040 0x003E
|
||||
#define PM49FL002 0x006D
|
||||
#define PM49FL004 0x006E
|
||||
#define PM49FL008 0x006A
|
||||
@@ -1264,6 +1268,58 @@ static const struct amd_flash_info jedec
|
||||
ERASEINFO(0x02000,2),
|
||||
ERASEINFO(0x04000,1),
|
||||
}
|
||||
+ }, {
|
||||
+ .mfr_id = MANUFACTURER_PMC,
|
||||
+ .dev_id = PM39LV512,
|
||||
+ .name = "PMC Pm39LV512",
|
||||
+ .uaddr = {
|
||||
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
||||
+ },
|
||||
+ .DevSize = SIZE_64KiB,
|
||||
+ .CmdSet = P_ID_AMD_STD,
|
||||
+ .NumEraseRegions= 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,16),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = MANUFACTURER_PMC,
|
||||
+ .dev_id = PM39LV010,
|
||||
+ .name = "PMC Pm39LV010",
|
||||
+ .uaddr = {
|
||||
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
||||
+ },
|
||||
+ .DevSize = SIZE_128KiB,
|
||||
+ .CmdSet = P_ID_AMD_STD,
|
||||
+ .NumEraseRegions= 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,32),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = MANUFACTURER_PMC,
|
||||
+ .dev_id = PM39LV020,
|
||||
+ .name = "PMC Pm39LV020",
|
||||
+ .uaddr = {
|
||||
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
||||
+ },
|
||||
+ .DevSize = SIZE_256KiB,
|
||||
+ .CmdSet = P_ID_AMD_STD,
|
||||
+ .NumEraseRegions= 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,64),
|
||||
+ }
|
||||
+ }, {
|
||||
+ .mfr_id = MANUFACTURER_PMC,
|
||||
+ .dev_id = PM39LV040,
|
||||
+ .name = "PMC Pm39LV040",
|
||||
+ .uaddr = {
|
||||
+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */
|
||||
+ },
|
||||
+ .DevSize = SIZE_512KiB,
|
||||
+ .CmdSet = P_ID_AMD_STD,
|
||||
+ .NumEraseRegions= 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x01000,128),
|
||||
+ }
|
||||
}, {
|
||||
.mfr_id = MANUFACTURER_PMC,
|
||||
.dev_id = PM49FL002,
|
@ -0,0 +1,28 @@ |
||||
Index: linux-2.6.24/drivers/mtd/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/Kconfig
|
||||
+++ linux-2.6.24/drivers/mtd/Kconfig
|
||||
@@ -57,6 +57,11 @@ config MTD_ROOTFS_SPLIT
|
||||
depends on MTD_PARTITIONS
|
||||
default y
|
||||
|
||||
+config MTD_TRXSPLIT
|
||||
+ bool "Automatically find and split TRX partitions"
|
||||
+ depends on MTD_PARTITIONS
|
||||
+ default n
|
||||
+
|
||||
config MTD_REDBOOT_PARTS
|
||||
tristate "RedBoot partition table parsing"
|
||||
depends on MTD_PARTITIONS
|
||||
Index: linux-2.6.24/drivers/mtd/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/mtd/Makefile
|
||||
+++ linux-2.6.24/drivers/mtd/Makefile
|
||||
@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o
|
||||
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
|
||||
|
||||
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
|
||||
+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
|
||||
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
@ -0,0 +1,30 @@ |
||||
Index: linux-2.6.24/drivers/ata/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/ata/Makefile
|
||||
+++ linux-2.6.24/drivers/ata/Makefile
|
||||
@@ -69,6 +69,7 @@ obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
|
||||
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
|
||||
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
|
||||
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
|
||||
+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
|
||||
# Should be last but two libata driver
|
||||
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
|
||||
# Should be last but one libata driver
|
||||
Index: linux-2.6.24/drivers/ata/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/ata/Kconfig
|
||||
+++ linux-2.6.24/drivers/ata/Kconfig
|
||||
@@ -660,4 +660,13 @@ config PATA_BF54X
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
+config PATA_RB153_CF
|
||||
+ tristate "RouterBOARD 153 Compact Flash support"
|
||||
+ depends on MIPS_ADM5120
|
||||
+ help
|
||||
+ This option enables support for a Compact Flash connected on
|
||||
+ the RouterBOARD 153.
|
||||
+
|
||||
+ If unsure, say N.
|
||||
+
|
||||
endif # ATA
|
@ -0,0 +1,17 @@ |
||||
Index: linux-2.6.24/arch/mips/kernel/head.S
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/arch/mips/kernel/head.S
|
||||
+++ linux-2.6.24/arch/mips/kernel/head.S
|
||||
@@ -126,7 +126,12 @@
|
||||
/*
|
||||
* Reserved space for exception handlers.
|
||||
* Necessary for machines which link their kernels at KSEG0.
|
||||
+ * Use as temporary storage for the kernel command line, so that it
|
||||
+ * can be updated easily without having to relink the kernel.
|
||||
*/
|
||||
+
|
||||
+EXPORT(_image_cmdline)
|
||||
+ .ascii "CMDLINE:"
|
||||
.fill 0x400
|
||||
#endif
|
||||
|
@ -0,0 +1,297 @@ |
||||
Index: linux-2.6.24/drivers/serial/amba-pl010.c
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/serial/amba-pl010.c
|
||||
+++ linux-2.6.24/drivers/serial/amba-pl010.c
|
||||
@@ -52,11 +52,10 @@
|
||||
|
||||
#include <asm/io.h>
|
||||
|
||||
-#define UART_NR 8
|
||||
-
|
||||
#define SERIAL_AMBA_MAJOR 204
|
||||
#define SERIAL_AMBA_MINOR 16
|
||||
-#define SERIAL_AMBA_NR UART_NR
|
||||
+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
|
||||
+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
|
||||
|
||||
#define AMBA_ISR_PASS_LIMIT 256
|
||||
|
||||
@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~UART010_CR_TIE;
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_TIE;
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
unsigned int cr;
|
||||
|
||||
- cr = readb(uap->port.membase + UART010_CR);
|
||||
+ cr = readl(uap->port.membase + UART010_CR);
|
||||
cr |= UART010_CR_MSIE;
|
||||
writel(cr, uap->port.membase + UART010_CR);
|
||||
}
|
||||
@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a
|
||||
struct tty_struct *tty = uap->port.info->tty;
|
||||
unsigned int status, ch, flag, rsr, max_count = 256;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
while (UART_RX_DATA(status) && max_count--) {
|
||||
- ch = readb(uap->port.membase + UART01x_DR);
|
||||
+ ch = readl(uap->port.membase + UART01x_DR);
|
||||
flag = TTY_NORMAL;
|
||||
|
||||
uap->port.icount.rx++;
|
||||
@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a
|
||||
* Note that the error handling code is
|
||||
* out of the main execution path
|
||||
*/
|
||||
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
||||
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
||||
writel(0, uap->port.membase + UART01x_ECR);
|
||||
|
||||
@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a
|
||||
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
||||
|
||||
ignore_char:
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
}
|
||||
spin_unlock(&uap->port.lock);
|
||||
tty_flip_buffer_push(tty);
|
||||
@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua
|
||||
|
||||
writel(0, uap->port.membase + UART010_ICR);
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
delta = status ^ uap->old_status;
|
||||
uap->old_status = status;
|
||||
@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
|
||||
spin_lock(&uap->port.lock);
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = readl(uap->port.membase + UART010_IIR);
|
||||
if (status) {
|
||||
do {
|
||||
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
||||
@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
if (pass_counter-- == 0)
|
||||
break;
|
||||
|
||||
- status = readb(uap->port.membase + UART010_IIR);
|
||||
+ status = readl(uap->port.membase + UART010_IIR);
|
||||
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
||||
UART010_IIR_TIS));
|
||||
handled = 1;
|
||||
@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo
|
||||
static unsigned int pl010_tx_empty(struct uart_port *port)
|
||||
{
|
||||
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
||||
- unsigned int status = readb(uap->port.membase + UART01x_FR);
|
||||
+ unsigned int status = readl(uap->port.membase + UART01x_FR);
|
||||
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
||||
}
|
||||
|
||||
@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru
|
||||
unsigned int result = 0;
|
||||
unsigned int status;
|
||||
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
if (status & UART01x_FR_DCD)
|
||||
result |= TIOCM_CAR;
|
||||
if (status & UART01x_FR_DSR)
|
||||
@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_
|
||||
unsigned int lcr_h;
|
||||
|
||||
spin_lock_irqsave(&uap->port.lock, flags);
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = readl(uap->port.membase + UART010_LCRH);
|
||||
if (break_state == -1)
|
||||
lcr_h |= UART01x_LCRH_BRK;
|
||||
else
|
||||
@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por
|
||||
/*
|
||||
* initialise the old status of the modem signals
|
||||
*/
|
||||
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
||||
|
||||
/*
|
||||
* Finally, enable interrupts
|
||||
@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p
|
||||
writel(0, uap->port.membase + UART010_CR);
|
||||
|
||||
/* disable break condition and fifos */
|
||||
- writel(readb(uap->port.membase + UART010_LCRH) &
|
||||
+ writel(readl(uap->port.membase + UART010_LCRH) &
|
||||
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
||||
uap->port.membase + UART010_LCRH);
|
||||
|
||||
@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port
|
||||
/*
|
||||
* Ask the core to calculate the divisor for us.
|
||||
*/
|
||||
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
||||
quot = uart_get_divisor(port, baud);
|
||||
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port
|
||||
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
||||
|
||||
/* first, disable everything */
|
||||
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
||||
|
||||
if (UART_ENABLE_MS(port, termios->c_cflag))
|
||||
old_cr |= UART010_CR_MSIE;
|
||||
@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops =
|
||||
.verify_port = pl010_verify_port,
|
||||
};
|
||||
|
||||
-static struct uart_amba_port *amba_ports[UART_NR];
|
||||
+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
|
||||
|
||||
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
||||
|
||||
@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct
|
||||
unsigned int status;
|
||||
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (!UART_TX_READY(status));
|
||||
writel(ch, uap->port.membase + UART01x_DR);
|
||||
@@ -567,7 +566,7 @@ pl010_console_write(struct console *co,
|
||||
/*
|
||||
* First save the CR then disable the interrupts
|
||||
*/
|
||||
- old_cr = readb(uap->port.membase + UART010_CR);
|
||||
+ old_cr = readl(uap->port.membase + UART010_CR);
|
||||
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
||||
|
||||
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
||||
@@ -577,7 +576,7 @@ pl010_console_write(struct console *co,
|
||||
* and restore the TCR
|
||||
*/
|
||||
do {
|
||||
- status = readb(uap->port.membase + UART01x_FR);
|
||||
+ status = readl(uap->port.membase + UART01x_FR);
|
||||
barrier();
|
||||
} while (status & UART01x_FR_BUSY);
|
||||
writel(old_cr, uap->port.membase + UART010_CR);
|
||||
@@ -589,9 +588,9 @@ static void __init
|
||||
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
||||
int *parity, int *bits)
|
||||
{
|
||||
- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
||||
unsigned int lcr_h, quot;
|
||||
- lcr_h = readb(uap->port.membase + UART010_LCRH);
|
||||
+ lcr_h = readl(uap->port.membase + UART010_LCRH);
|
||||
|
||||
*parity = 'n';
|
||||
if (lcr_h & UART01x_LCRH_PEN) {
|
||||
@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am
|
||||
else
|
||||
*bits = 8;
|
||||
|
||||
- quot = readb(uap->port.membase + UART010_LCRL) |
|
||||
- readb(uap->port.membase + UART010_LCRM) << 8;
|
||||
+ quot = readl(uap->port.membase + UART010_LCRL) |
|
||||
+ readl(uap->port.membase + UART010_LCRM) << 8;
|
||||
*baud = uap->port.uartclk / (16 * (quot + 1));
|
||||
}
|
||||
}
|
||||
@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st
|
||||
* if so, search for the first available port that does have
|
||||
* console support.
|
||||
*/
|
||||
- if (co->index >= UART_NR)
|
||||
+ if (co->index >= SERIAL_AMBA_NR)
|
||||
co->index = 0;
|
||||
uap = amba_ports[co->index];
|
||||
if (!uap)
|
||||
@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st
|
||||
|
||||
static struct uart_driver amba_reg;
|
||||
static struct console amba_console = {
|
||||
- .name = "ttyAM",
|
||||
+ .name = SERIAL_AMBA_NAME,
|
||||
.write = pl010_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = pl010_console_setup,
|
||||
@@ -659,11 +658,11 @@ static struct console amba_console = {
|
||||
|
||||
static struct uart_driver amba_reg = {
|
||||
.owner = THIS_MODULE,
|
||||
- .driver_name = "ttyAM",
|
||||
- .dev_name = "ttyAM",
|
||||
+ .driver_name = SERIAL_AMBA_NAME,
|
||||
+ .dev_name = SERIAL_AMBA_NAME,
|
||||
.major = SERIAL_AMBA_MAJOR,
|
||||
.minor = SERIAL_AMBA_MINOR,
|
||||
- .nr = UART_NR,
|
||||
+ .nr = SERIAL_AMBA_NR,
|
||||
.cons = AMBA_CONSOLE,
|
||||
};
|
||||
|
||||
Index: linux-2.6.24/drivers/serial/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/serial/Kconfig
|
||||
+++ linux-2.6.24/drivers/serial/Kconfig
|
||||
@@ -303,10 +303,25 @@ config SERIAL_AMBA_PL010
|
||||
help
|
||||
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
||||
an Integrator/AP or Integrator/PP2 platform, or if you have a
|
||||
- Cirrus Logic EP93xx CPU, say Y or M here.
|
||||
+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
+config SERIAL_AMBA_PL010_NUMPORTS
|
||||
+ int "Maximum number of AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "8"
|
||||
+ ---help---
|
||||
+ Set this to the number of serial ports you want the AMBA PL010 driver
|
||||
+ to support.
|
||||
+
|
||||
+config SERIAL_AMBA_PL010_PORTNAME
|
||||
+ string "Name of the AMBA PL010 serial ports"
|
||||
+ depends on SERIAL_AMBA_PL010
|
||||
+ default "ttyAM"
|
||||
+ ---help---
|
||||
+ ::: To be written :::
|
||||
+
|
||||
config SERIAL_AMBA_PL010_CONSOLE
|
||||
bool "Support for console on AMBA serial port"
|
||||
depends on SERIAL_AMBA_PL010=y
|
@ -0,0 +1,15 @@ |
||||
Index: linux-2.6.24/drivers/amba/bus.c
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/amba/bus.c
|
||||
+++ linux-2.6.24/drivers/amba/bus.c
|
||||
@@ -17,6 +17,10 @@
|
||||
#include <asm/io.h>
|
||||
#include <asm/sizes.h>
|
||||
|
||||
+#ifndef NO_IRQ
|
||||
+#define NO_IRQ (-1)
|
||||
+#endif
|
||||
+
|
||||
#define to_amba_device(d) container_of(d, struct amba_device, dev)
|
||||
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
|
||||
|
@ -0,0 +1,50 @@ |
||||
Index: linux-2.6.24/drivers/pci/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/pci/Kconfig
|
||||
+++ linux-2.6.24/drivers/pci/Kconfig
|
||||
@@ -42,6 +42,12 @@ config PCI_DEBUG
|
||||
|
||||
When in doubt, say N.
|
||||
|
||||
+config PCI_DISABLE_COMMON_QUIRKS
|
||||
+ bool "PCI disable common quirks"
|
||||
+ depends on PCI
|
||||
+ help
|
||||
+ If you don't know what to do here, say N.
|
||||
+
|
||||
config HT_IRQ
|
||||
bool "Interrupts on hypertransport devices"
|
||||
default y
|
||||
Index: linux-2.6.24/drivers/pci/quirks.c
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/pci/quirks.c
|
||||
+++ linux-2.6.24/drivers/pci/quirks.c
|
||||
@@ -23,6 +23,7 @@
|
||||
#include <linux/acpi.h>
|
||||
#include "pci.h"
|
||||
|
||||
+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
|
||||
/* The Mellanox Tavor device gives false positive parity errors
|
||||
* Mark this device with a broken_parity_status, to allow
|
||||
* PCI scanning code to "skip" this now blacklisted device.
|
||||
@@ -1479,6 +1480,7 @@ static void __devinit fixup_rev1_53c810(
|
||||
}
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
|
||||
+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
|
||||
|
||||
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
|
||||
{
|
||||
@@ -1542,6 +1544,7 @@ void pci_fixup_device(enum pci_fixup_pas
|
||||
}
|
||||
EXPORT_SYMBOL(pci_fixup_device);
|
||||
|
||||
+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
|
||||
/* Enable 1k I/O space granularity on the Intel P64H2 */
|
||||
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
|
||||
{
|
||||
@@ -1755,3 +1758,4 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
|
||||
quirk_msi_intx_disable_bug);
|
||||
|
||||
#endif /* CONFIG_PCI_MSI */
|
||||
+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
|
@ -0,0 +1,29 @@ |
||||
Index: linux-2.6.24/drivers/leds/leds-gpio.c
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/leds/leds-gpio.c
|
||||
+++ linux-2.6.24/drivers/leds/leds-gpio.c
|
||||
@@ -41,13 +41,17 @@ static void gpio_led_set(struct led_clas
|
||||
container_of(led_cdev, struct gpio_led_data, cdev);
|
||||
int level;
|
||||
|
||||
- if (value == LED_OFF)
|
||||
- level = 0;
|
||||
- else
|
||||
- level = 1;
|
||||
-
|
||||
- if (led_dat->active_low)
|
||||
- level = !level;
|
||||
+ switch (value) {
|
||||
+ case LED_OFF:
|
||||
+ level = led_dat->active_low ? 1 : 0;
|
||||
+ break;
|
||||
+ case LED_FULL:
|
||||
+ level = led_dat->active_low ? 0 : 1;
|
||||
+ break;
|
||||
+ default:
|
||||
+ level = value;
|
||||
+ break;
|
||||
+ }
|
||||
|
||||
/* setting GPIOs with I2C/etc requires a preemptible task context */
|
||||
if (led_dat->can_sleep) {
|
@ -0,0 +1,34 @@ |
||||
Index: linux-2.6.24/drivers/i2c/busses/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/i2c/busses/Kconfig
|
||||
+++ linux-2.6.24/drivers/i2c/busses/Kconfig
|
||||
@@ -146,6 +146,17 @@ config I2C_GPIO
|
||||
This is a very simple bitbanging I2C driver utilizing the
|
||||
arch-neutral GPIO API to control the SCL and SDA lines.
|
||||
|
||||
+config I2C_GPIO_CUSTOM
|
||||
+ tristate "Custom GPIO-based I2C driver"
|
||||
+ depends on GENERIC_GPIO
|
||||
+ select I2C_GPIO
|
||||
+ help
|
||||
+ This is an I2C driver to register 1 to 4 custom I2C buses using
|
||||
+ GPIO lines.
|
||||
+
|
||||
+ This support is also available as a module. If so, the module
|
||||
+ will be called i2c-gpio-custom.
|
||||
+
|
||||
config I2C_HYDRA
|
||||
tristate "CHRP Apple Hydra Mac I/O I2C interface"
|
||||
depends on PCI && PPC_CHRP && EXPERIMENTAL
|
||||
Index: linux-2.6.24/drivers/i2c/busses/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/i2c/busses/Makefile
|
||||
+++ linux-2.6.24/drivers/i2c/busses/Makefile
|
||||
@@ -14,6 +14,7 @@ obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bf
|
||||
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
|
||||
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
|
||||
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
|
||||
+obj-$(CONFIG_I2C_GPIO_CUSTOM) += i2c-gpio-custom.o
|
||||
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
|
||||
obj-$(CONFIG_I2C_I801) += i2c-i801.o
|
||||
obj-$(CONFIG_I2C_I810) += i2c-i810.o
|
@ -0,0 +1,35 @@ |
||||
Index: linux-2.6.24/drivers/watchdog/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/watchdog/Kconfig
|
||||
+++ linux-2.6.24/drivers/watchdog/Kconfig
|
||||
@@ -607,6 +607,18 @@ config SBC_EPX_C3_WATCHDOG
|
||||
|
||||
# MIPS Architecture
|
||||
|
||||
+config ADM5120_WDT
|
||||
+ tristate "Infineon ADM5120 SoC hardware watchdog"
|
||||
+ depends on WATCHDOG && MIPS_ADM5120
|
||||
+ help
|
||||
+ This is a driver for hardware watchdog integrated in Infineon
|
||||
+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
|
||||
+ it doesn't freeze, and if it does, it reboots your computer after a
|
||||
+ certain amount of time.
|
||||
+
|
||||
+ To compile this driver as a module, choose M here: the module will be
|
||||
+ called adm5120_wdt.
|
||||
+
|
||||
config INDYDOG
|
||||
tristate "Indy/I2 Hardware Watchdog"
|
||||
depends on SGI_IP22
|
||||
Index: linux-2.6.24/drivers/watchdog/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.24.orig/drivers/watchdog/Makefile
|
||||
+++ linux-2.6.24/drivers/watchdog/Makefile
|
||||
@@ -89,6 +89,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
|
||||
# M68KNOMMU Architecture
|
||||
|
||||
# MIPS Architecture
|
||||
+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
|
||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
||||
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
|
||||
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
@ -0,0 +1,269 @@ |
||||
CONFIG_32BIT=y |
||||
# CONFIG_64BIT is not set |
||||
CONFIG_ADM5120_CPU_OVERRIDES=y |
||||
CONFIG_ADM5120_WDT=y |
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set |
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set |
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y |
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set |
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y |
||||
CONFIG_ARM_AMBA=y |
||||
CONFIG_BASE_SMALL=0 |
||||
CONFIG_BAYCOM_SER_FDX=m |
||||
CONFIG_BAYCOM_SER_HDX=m |
||||
# CONFIG_BCM47XX is not set |
||||
CONFIG_BINFMT_MISC=m |
||||
CONFIG_BITREVERSE=y |
||||
# CONFIG_BT_HCIUART_LL is not set |
||||
CONFIG_CEVT_R4K=y |
||||
CONFIG_CIFS_DEBUG2=y |
||||
CONFIG_CIFS_EXPERIMENTAL=y |
||||
CONFIG_CIFS_STATS2=y |
||||
CONFIG_CIFS_WEAK_PW_HASH=y |
||||
CONFIG_CIFS_XATTR=y |
||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit" |
||||
CONFIG_CPU_BIG_ENDIAN=y |
||||
CONFIG_CPU_HAS_LLSC=y |
||||
CONFIG_CPU_HAS_PREFETCH=y |
||||
CONFIG_CPU_HAS_SYNC=y |
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set |
||||
# CONFIG_CPU_LOONGSON2 is not set |
||||
CONFIG_CPU_MIPS32=y |
||||
CONFIG_CPU_MIPS32_R1=y |
||||
# CONFIG_CPU_MIPS32_R2 is not set |
||||
# CONFIG_CPU_MIPS64_R1 is not set |
||||
# CONFIG_CPU_MIPS64_R2 is not set |
||||
CONFIG_CPU_MIPSR1=y |
||||
# CONFIG_CPU_NEVADA is not set |
||||
# CONFIG_CPU_R10000 is not set |
||||
# CONFIG_CPU_R3000 is not set |
||||
# CONFIG_CPU_R4300 is not set |
||||
# CONFIG_CPU_R4X00 is not set |
||||
# CONFIG_CPU_R5000 is not set |
||||
# CONFIG_CPU_R5432 is not set |
||||
# CONFIG_CPU_R6000 is not set |
||||
# CONFIG_CPU_R8000 is not set |
||||
# CONFIG_CPU_RM7000 is not set |
||||
# CONFIG_CPU_RM9000 is not set |
||||
# CONFIG_CPU_SB1 is not set |
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y |
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y |
||||
# CONFIG_CPU_TX39XX is not set |
||||
# CONFIG_CPU_TX49XX is not set |
||||
# CONFIG_CPU_VR41XX is not set |
||||
# CONFIG_CRYPTO_HW is not set |
||||
CONFIG_CSRC_R4K=y |
||||
CONFIG_DEVPORT=y |
||||
# CONFIG_DM9000 is not set |
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y |
||||
CONFIG_DMA_NONCOHERENT=y |
||||
# CONFIG_E1000E is not set |
||||
CONFIG_EARLY_PRINTK=y |
||||
CONFIG_ELF_CORE=y |
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set |
||||
# CONFIG_EXT3_FS_SECURITY is not set |
||||
CONFIG_EXT3_FS_XATTR=y |
||||
CONFIG_FS_MBCACHE=m |
||||
CONFIG_FS_POSIX_ACL=y |
||||
CONFIG_GENERIC_ACL=y |
||||
CONFIG_GENERIC_CLOCKEVENTS=y |
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y |
||||
CONFIG_GENERIC_CMOS_UPDATE=y |
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y |
||||
CONFIG_GENERIC_GPIO=y |
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set |
||||
CONFIG_HAS_DMA=y |
||||
CONFIG_HAS_IOMEM=y |
||||
CONFIG_HAS_IOPORT=y |
||||
CONFIG_HID=m |
||||
# CONFIG_HIDRAW is not set |
||||
CONFIG_HID_SUPPORT=y |
||||
CONFIG_HW_HAS_PCI=y |
||||
CONFIG_HW_RANDOM=y |
||||
CONFIG_HZ=250 |
||||
# CONFIG_HZ_100 is not set |
||||
CONFIG_HZ_250=y |
||||
# CONFIG_I2C is not set |
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set |
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set |
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set |
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set |
||||
# CONFIG_IDE is not set |
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m |
||||
CONFIG_INITRAMFS_SOURCE="" |
||||
CONFIG_INOTIFY=y |
||||
CONFIG_INOTIFY_USER=y |
||||
CONFIG_INPUT=y |
||||
# CONFIG_INPUT_EVDEV is not set |
||||
# CONFIG_IP1000 is not set |
||||
CONFIG_IPV6_MIP6=m |
||||
CONFIG_IPV6_PRIVACY=y |
||||
CONFIG_IPV6_ROUTE_INFO=y |
||||
CONFIG_IPV6_TUNNEL=m |
||||
CONFIG_IP_NF_TARGET_CLUSTERIP=m |
||||
CONFIG_IRQ_CPU=y |
||||
# CONFIG_JOLIET is not set |
||||
CONFIG_LEDS_ADM5120=m |
||||
# CONFIG_LEDS_ADM5120_DIAG is not set |
||||
# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set |
||||
# CONFIG_LEDS_ALIX is not set |
||||
CONFIG_LEDS_GPIO=m |
||||
CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m |
||||
CONFIG_LEGACY_PTYS=y |
||||
CONFIG_LEGACY_PTY_COUNT=256 |
||||
# CONFIG_LEMOTE_FULONG is not set |
||||
# CONFIG_MACH_ALCHEMY is not set |
||||
# CONFIG_MACH_DECSTATION is not set |
||||
# CONFIG_MACH_JAZZ is not set |
||||
# CONFIG_MACH_VR41XX is not set |
||||
CONFIG_MII=m |
||||
# CONFIG_MINIX_FS is not set |
||||
CONFIG_MIPS=y |
||||
CONFIG_MIPS_ADM5120=y |
||||
CONFIG_MIPS_ADM5120_ENET=y |
||||
# CONFIG_MIPS_ATLAS is not set |
||||
# CONFIG_MIPS_COBALT is not set |
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5 |
||||
# CONFIG_MIPS_MALTA is not set |
||||
CONFIG_MIPS_MT_DISABLED=y |
||||
# CONFIG_MIPS_MT_SMP is not set |
||||
# CONFIG_MIPS_MT_SMTC is not set |
||||
# CONFIG_MIPS_SEAD is not set |
||||
# CONFIG_MIPS_SIM is not set |
||||
CONFIG_MODULE_FORCE_UNLOAD=y |
||||
CONFIG_MTD=y |
||||
# CONFIG_MTD_ABSENT is not set |
||||
CONFIG_MTD_ADM5120=y |
||||
CONFIG_MTD_BLKDEVS=y |
||||
CONFIG_MTD_BLOCK=y |
||||
CONFIG_MTD_BLOCK2MTD=y |
||||
CONFIG_MTD_CFI=y |
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set |
||||
CONFIG_MTD_CFI_AMDSTD=y |
||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y |
||||
CONFIG_MTD_CFI_I1=y |
||||
CONFIG_MTD_CFI_I2=y |
||||
# CONFIG_MTD_CFI_I4 is not set |
||||
# CONFIG_MTD_CFI_I8 is not set |
||||
# CONFIG_MTD_CFI_INTELEXT is not set |
||||
# CONFIG_MTD_CFI_STAA is not set |
||||
CONFIG_MTD_CFI_UTIL=y |
||||
CONFIG_MTD_CHAR=y |
||||
CONFIG_MTD_CMDLINE_PARTS=y |
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y |
||||
# CONFIG_MTD_CONCAT is not set |
||||
# CONFIG_MTD_DEBUG is not set |
||||
# CONFIG_MTD_DOC2000 is not set |
||||
# CONFIG_MTD_DOC2001 is not set |
||||
# CONFIG_MTD_DOC2001PLUS is not set |
||||
CONFIG_MTD_GEN_PROBE=y |
||||
# CONFIG_MTD_JEDECPROBE is not set |
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y |
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set |
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y |
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set |
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y |
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set |
||||
# CONFIG_MTD_MTDRAM is not set |
||||
# CONFIG_MTD_MYLOADER_PARTS is not set |
||||
# CONFIG_MTD_ONENAND is not set |
||||
CONFIG_MTD_PARTITIONS=y |
||||
# CONFIG_MTD_PCI is not set |
||||
# CONFIG_MTD_PHRAM is not set |
||||
# CONFIG_MTD_PHYSMAP is not set |
||||
# CONFIG_MTD_PLATRAM is not set |
||||
# CONFIG_MTD_PMC551 is not set |
||||
# CONFIG_MTD_RAM is not set |
||||
# CONFIG_MTD_REDBOOT_PARTS is not set |
||||
# CONFIG_MTD_ROM is not set |
||||
# CONFIG_MTD_SLRAM is not set |
||||
CONFIG_MTD_TRXSPLIT=y |
||||
CONFIG_NETDEV_1000=y |
||||
# CONFIG_NET_PCI is not set |
||||
# CONFIG_NET_PKTGEN is not set |
||||
# CONFIG_NET_VENDOR_3COM is not set |
||||
# CONFIG_NO_IOPORT is not set |
||||
# CONFIG_PAGE_SIZE_16KB is not set |
||||
CONFIG_PAGE_SIZE_4KB=y |
||||
# CONFIG_PAGE_SIZE_64KB is not set |
||||
# CONFIG_PAGE_SIZE_8KB is not set |
||||
# CONFIG_PARTITION_ADVANCED is not set |
||||
# CONFIG_PCIPCWATCHDOG is not set |
||||
CONFIG_PCI_ADM5120=y |
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y |
||||
CONFIG_PCI_DOMAINS=y |
||||
# CONFIG_PMC_MSP is not set |
||||
# CONFIG_PMC_YOSEMITE is not set |
||||
# CONFIG_PNX8550_JBS is not set |
||||
# CONFIG_PNX8550_STB810 is not set |
||||
# CONFIG_RTC is not set |
||||
CONFIG_RTC_LIB=y |
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y |
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y |
||||
# CONFIG_SCSI_SRP_ATTRS is not set |
||||
CONFIG_SCSI_WAIT_SCAN=m |
||||
# CONFIG_SERIAL_8250 is not set |
||||
# CONFIG_SERIAL_ADM5120 is not set |
||||
CONFIG_SERIAL_AMBA_PL010=y |
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y |
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 |
||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" |
||||
# CONFIG_SERIAL_AMBA_PL011 is not set |
||||
CONFIG_SERIO=y |
||||
# CONFIG_SERIO_AMBAKMI is not set |
||||
# CONFIG_SERIO_I8042 is not set |
||||
# CONFIG_SERIO_LIBPS2 is not set |
||||
# CONFIG_SERIO_PCIPS2 is not set |
||||
# CONFIG_SERIO_RAW is not set |
||||
CONFIG_SERIO_SERPORT=y |
||||
# CONFIG_SGI_IP22 is not set |
||||
# CONFIG_SGI_IP27 is not set |
||||
# CONFIG_SGI_IP32 is not set |
||||
# CONFIG_SIBYTE_BIGSUR is not set |
||||
# CONFIG_SIBYTE_CARMEL is not set |
||||
# CONFIG_SIBYTE_CRHINE is not set |
||||
# CONFIG_SIBYTE_CRHONE is not set |
||||
# CONFIG_SIBYTE_LITTLESUR is not set |
||||
# CONFIG_SIBYTE_PTSWARM is not set |
||||
# CONFIG_SIBYTE_RHONE is not set |
||||
# CONFIG_SIBYTE_SENTOSA is not set |
||||
# CONFIG_SIBYTE_SWARM is not set |
||||
CONFIG_SLABINFO=y |
||||
# CONFIG_SND_USB_AUDIO is not set |
||||
CONFIG_SOFT_WATCHDOG=m |
||||
# CONFIG_SPARSEMEM_STATIC is not set |
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set |
||||
CONFIG_SSB_POSSIBLE=y |
||||
CONFIG_SYSVIPC_SYSCTL=y |
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y |
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y |
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y |
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y |
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y |
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y |
||||
CONFIG_TICK_ONESHOT=y |
||||
CONFIG_TMPFS_POSIX_ACL=y |
||||
# CONFIG_TOSHIBA_JMR3927 is not set |
||||
# CONFIG_TOSHIBA_RBTX4927 is not set |
||||
# CONFIG_TOSHIBA_RBTX4938 is not set |
||||
CONFIG_TRAD_SIGNALS=y |
||||
# CONFIG_USBPCWATCHDOG is not set |
||||
# CONFIG_USB_ACM is not set |
||||
CONFIG_USB_ADM5120_HCD=m |
||||
# CONFIG_USB_ATM is not set |
||||
# CONFIG_USB_CATC is not set |
||||
# CONFIG_USB_DEVICEFS is not set |
||||
# CONFIG_USB_EHCI_HCD is not set |
||||
# CONFIG_USB_KAWETH is not set |
||||
# CONFIG_USB_PEGASUS is not set |
||||
# CONFIG_USB_PRINTER is not set |
||||
# CONFIG_USB_R8A66597_HCD is not set |
||||
# CONFIG_USB_SERIAL is not set |
||||
# CONFIG_USB_STORAGE is not set |
||||
# CONFIG_USB_UHCI_HCD is not set |
||||
# CONFIG_USB_USBNET is not set |
||||
# CONFIG_USER_NS is not set |
||||
# CONFIG_VGASTATE is not set |
||||
CONFIG_VM_EVENT_COUNTERS=y |
||||
# CONFIG_ZD1211RW is not set |
||||
CONFIG_ZONE_DMA_FLAG=0 |
@ -0,0 +1,293 @@ |
||||
CONFIG_32BIT=y |
||||
# CONFIG_64BIT is not set |
||||
CONFIG_ADM5120_CPU_OVERRIDES=y |
||||
CONFIG_ADM5120_WDT=y |
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set |
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set |
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y |
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set |
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y |
||||
CONFIG_ARM_AMBA=y |
||||
CONFIG_BASE_SMALL=0 |
||||
CONFIG_BAYCOM_SER_FDX=m |
||||
CONFIG_BAYCOM_SER_HDX=m |
||||
# CONFIG_BCM47XX is not set |
||||
CONFIG_BINFMT_MISC=m |
||||
CONFIG_BITREVERSE=y |
||||
# CONFIG_BT_HCIUART_LL is not set |
||||
CONFIG_CEVT_R4K=y |
||||
CONFIG_CIFS_DEBUG2=y |
||||
CONFIG_CIFS_EXPERIMENTAL=y |
||||
CONFIG_CIFS_STATS2=y |
||||
CONFIG_CIFS_WEAK_PW_HASH=y |
||||
CONFIG_CIFS_XATTR=y |
||||
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit" |
||||
# CONFIG_CPU_BIG_ENDIAN is not set |
||||
CONFIG_CPU_HAS_LLSC=y |
||||
CONFIG_CPU_HAS_PREFETCH=y |
||||
CONFIG_CPU_HAS_SYNC=y |
||||
CONFIG_CPU_LITTLE_ENDIAN=y |
||||
# CONFIG_CPU_LOONGSON2 is not set |
||||
CONFIG_CPU_MIPS32=y |
||||
CONFIG_CPU_MIPS32_R1=y |
||||
# CONFIG_CPU_MIPS32_R2 is not set |
||||
# CONFIG_CPU_MIPS64_R1 is not set |
||||
# CONFIG_CPU_MIPS64_R2 is not set |
||||
CONFIG_CPU_MIPSR1=y |
||||
# CONFIG_CPU_NEVADA is not set |
||||
# CONFIG_CPU_R10000 is not set |
||||
# CONFIG_CPU_R3000 is not set |
||||
# CONFIG_CPU_R4300 is not set |
||||
# CONFIG_CPU_R4X00 is not set |
||||
# CONFIG_CPU_R5000 is not set |
||||
# CONFIG_CPU_R5432 is not set |
||||
# CONFIG_CPU_R6000 is not set |
||||
# CONFIG_CPU_R8000 is not set |
||||
# CONFIG_CPU_RM7000 is not set |
||||
# CONFIG_CPU_RM9000 is not set |
||||
# CONFIG_CPU_SB1 is not set |
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y |
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y |
||||
# CONFIG_CPU_TX39XX is not set |
||||
# CONFIG_CPU_TX49XX is not set |
||||
# CONFIG_CPU_VR41XX is not set |
||||
# CONFIG_CRYPTO_HW is not set |
||||
CONFIG_CSRC_R4K=y |
||||
CONFIG_DEVPORT=y |
||||
# CONFIG_DM9000 is not set |
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y |
||||
CONFIG_DMA_NONCOHERENT=y |
||||
CONFIG_EARLY_PRINTK=y |
||||
CONFIG_ELF_CORE=y |
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set |
||||
# CONFIG_EXT3_FS_SECURITY is not set |
||||
CONFIG_EXT3_FS_XATTR=y |
||||
CONFIG_FS_MBCACHE=m |
||||
CONFIG_FS_POSIX_ACL=y |
||||
CONFIG_GENERIC_ACL=y |
||||
CONFIG_GENERIC_CLOCKEVENTS=y |
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y |
||||
CONFIG_GENERIC_CMOS_UPDATE=y |
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y |
||||
CONFIG_GENERIC_GPIO=y |
||||
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set |
||||
CONFIG_HAS_DMA=y |
||||
CONFIG_HAS_IOMEM=y |
||||
CONFIG_HAS_IOPORT=y |
||||
CONFIG_HID=m |
||||
# CONFIG_HIDRAW is not set |
||||
CONFIG_HID_SUPPORT=y |
||||
CONFIG_HW_HAS_PCI=y |
||||
CONFIG_HW_RANDOM=y |
||||
CONFIG_HZ=250 |
||||
# CONFIG_HZ_100 is not set |
||||
CONFIG_HZ_250=y |
||||
# CONFIG_I2C is not set |
||||
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set |
||||
# CONFIG_IBM_NEW_EMAC_RGMII is not set |
||||
# CONFIG_IBM_NEW_EMAC_TAH is not set |
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set |
||||
# CONFIG_IDE is not set |
||||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m |
||||
CONFIG_INITRAMFS_SOURCE="" |
||||
CONFIG_INOTIFY=y |
||||
CONFIG_INOTIFY_USER=y |
||||
CONFIG_INPUT=y |
||||
# CONFIG_INPUT_EVDEV is not set |
||||
CONFIG_IPV6_MIP6=m |
||||
CONFIG_IPV6_PRIVACY=y |
||||
CONFIG_IPV6_ROUTE_INFO=y |
||||
CONFIG_IPV6_TUNNEL=m |
||||
CONFIG_IP_NF_TARGET_CLUSTERIP=m |
||||
CONFIG_IRQ_CPU=y |
||||
# CONFIG_JOLIET is not set |
||||
CONFIG_LEDS_ADM5120=m |
||||
# CONFIG_LEDS_ADM5120_DIAG is not set |
||||
# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set |
||||
# CONFIG_LEDS_ALIX is not set |
||||
CONFIG_LEDS_GPIO=m |
||||
CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m |
||||
CONFIG_LEGACY_PTYS=y |
||||
CONFIG_LEGACY_PTY_COUNT=256 |
||||
# CONFIG_LEMOTE_FULONG is not set |
||||
# CONFIG_MACH_ALCHEMY is not set |
||||
# CONFIG_MACH_DECSTATION is not set |
||||
# CONFIG_MACH_JAZZ is not set |
||||
# CONFIG_MACH_VR41XX is not set |
||||
CONFIG_MII=m |
||||
# CONFIG_MINIX_FS is not set |
||||
CONFIG_MIPS=y |
||||
CONFIG_MIPS_ADM5120=y |
||||
# CONFIG_MIPS_ADM5120_ENET is not set |
||||
# CONFIG_MIPS_ATLAS is not set |
||||
# CONFIG_MIPS_COBALT is not set |
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5 |
||||
# CONFIG_MIPS_MALTA is not set |
||||
CONFIG_MIPS_MT_DISABLED=y |
||||
# CONFIG_MIPS_MT_SMP is not set |
||||
# CONFIG_MIPS_MT_SMTC is not set |
||||
# CONFIG_MIPS_SEAD is not set |
||||
# CONFIG_MIPS_SIM is not set |
||||
CONFIG_MODULE_FORCE_UNLOAD=y |
||||
CONFIG_MTD=y |
||||
# CONFIG_MTD_ABSENT is not set |
||||
CONFIG_MTD_ADM5120=y |
||||
# CONFIG_MTD_ALAUDA is not set |
||||
CONFIG_MTD_BLKDEVS=y |
||||
CONFIG_MTD_BLOCK=y |
||||
# CONFIG_MTD_BLOCK2MTD is not set |
||||
CONFIG_MTD_CFI=y |
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set |
||||
CONFIG_MTD_CFI_AMDSTD=y |
||||
CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y |
||||
CONFIG_MTD_CFI_I1=y |
||||
CONFIG_MTD_CFI_I2=y |
||||
# CONFIG_MTD_CFI_I4 is not set |
||||
# CONFIG_MTD_CFI_I8 is not set |
||||
# CONFIG_MTD_CFI_INTELEXT is not set |
||||
# CONFIG_MTD_CFI_STAA is not set |
||||
CONFIG_MTD_CFI_UTIL=y |
||||
CONFIG_MTD_CHAR=y |
||||
CONFIG_MTD_CMDLINE_PARTS=y |
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y |
||||
# CONFIG_MTD_CONCAT is not set |
||||
# CONFIG_MTD_DEBUG is not set |
||||
# CONFIG_MTD_DOC2000 is not set |
||||
# CONFIG_MTD_DOC2001 is not set |
||||
# CONFIG_MTD_DOC2001PLUS is not set |
||||
CONFIG_MTD_GEN_PROBE=y |
||||
CONFIG_MTD_JEDECPROBE=y |
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y |
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set |
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y |
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set |
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y |
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set |
||||
# CONFIG_MTD_MTDRAM is not set |
||||
CONFIG_MTD_MYLOADER_PARTS=y |
||||
CONFIG_MTD_NAND=y |
||||
# CONFIG_MTD_NAND_ADM5120 is not set |
||||
# CONFIG_MTD_NAND_CAFE is not set |
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set |
||||
# CONFIG_MTD_NAND_ECC_SMC is not set |
||||
CONFIG_MTD_NAND_IDS=y |
||||
# CONFIG_MTD_NAND_MUSEUM_IDS is not set |
||||
# CONFIG_MTD_NAND_NANDSIM is not set |
||||
CONFIG_MTD_NAND_PLATFORM=y |
||||
# CONFIG_MTD_NAND_VERIFY_WRITE is not set |
||||
# CONFIG_MTD_ONENAND is not set |
||||
CONFIG_MTD_PARTITIONS=y |
||||
# CONFIG_MTD_PCI is not set |
||||
# CONFIG_MTD_PHRAM is not set |
||||
# CONFIG_MTD_PHYSMAP is not set |
||||
# CONFIG_MTD_PLATRAM is not set |
||||
# CONFIG_MTD_PMC551 is not set |
||||
# CONFIG_MTD_RAM is not set |
||||
# CONFIG_MTD_REDBOOT_PARTS is not set |
||||
# CONFIG_MTD_ROM is not set |
||||
# CONFIG_MTD_SLRAM is not set |
||||
CONFIG_MTD_TRXSPLIT=y |
||||
# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set |
||||
# CONFIG_NET_PCI is not set |
||||
# CONFIG_NET_PKTGEN is not set |
||||
# CONFIG_NET_VENDOR_3COM is not set |
||||
# CONFIG_NO_IOPORT is not set |
||||
# CONFIG_PAGE_SIZE_16KB is not set |
||||
CONFIG_PAGE_SIZE_4KB=y |
||||
# CONFIG_PAGE_SIZE_64KB is not set |
||||
# CONFIG_PAGE_SIZE_8KB is not set |
||||
# CONFIG_PARTITION_ADVANCED is not set |
||||
# CONFIG_PCIPCWATCHDOG is not set |
||||
CONFIG_PCI_ADM5120=y |
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y |
||||
CONFIG_PCI_DOMAINS=y |
||||
# CONFIG_PMC_MSP is not set |
||||
# CONFIG_PMC_YOSEMITE is not set |
||||
# CONFIG_PNX8550_JBS is not set |
||||
# CONFIG_PNX8550_STB810 is not set |
||||
# CONFIG_RTC is not set |
||||
CONFIG_RTC_LIB=y |
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y |
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y |
||||
# CONFIG_SCSI_SRP_ATTRS is not set |
||||
CONFIG_SCSI_WAIT_SCAN=m |
||||
# CONFIG_SERIAL_8250 is not set |
||||
# CONFIG_SERIAL_ADM5120 is not set |
||||
CONFIG_SERIAL_AMBA_PL010=y |
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y |
||||
CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 |
||||
CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" |
||||
# CONFIG_SERIAL_AMBA_PL011 is not set |
||||
CONFIG_SERIO=y |
||||
# CONFIG_SERIO_AMBAKMI is not set |
||||
# CONFIG_SERIO_I8042 is not set |
||||
# CONFIG_SERIO_LIBPS2 is not set |
||||
# CONFIG_SERIO_PCIPS2 is not set |
||||
# CONFIG_SERIO_RAW is not set |
||||
CONFIG_SERIO_SERPORT=y |
||||
# CONFIG_SGI_IP22 is not set |
||||
# CONFIG_SGI_IP27 is not set |
||||
# CONFIG_SGI_IP32 is not set |
||||
# CONFIG_SIBYTE_BIGSUR is not set |
||||
# CONFIG_SIBYTE_CARMEL is not set |
||||
# CONFIG_SIBYTE_CRHINE is not set |
||||
# CONFIG_SIBYTE_CRHONE is not set |
||||
# CONFIG_SIBYTE_LITTLESUR is not set |
||||
# CONFIG_SIBYTE_PTSWARM is not set |
||||
# CONFIG_SIBYTE_RHONE is not set |
||||
# CONFIG_SIBYTE_SENTOSA is not set |
||||
# CONFIG_SIBYTE_SWARM is not set |
||||
CONFIG_SLABINFO=y |
||||
CONFIG_SOFT_WATCHDOG=m |
||||
# CONFIG_SPARSEMEM_STATIC is not set |
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set |
||||
CONFIG_SSB_POSSIBLE=y |
||||
CONFIG_SYSVIPC_SYSCTL=y |
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y |
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y |
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y |
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y |
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y |
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y |
||||
CONFIG_TICK_ONESHOT=y |
||||
CONFIG_TMPFS_POSIX_ACL=y |
||||
# CONFIG_TOSHIBA_JMR3927 is not set |
||||
# CONFIG_TOSHIBA_RBTX4927 is not set |
||||
# CONFIG_TOSHIBA_RBTX4938 is not set |
||||
CONFIG_TRAD_SIGNALS=y |
||||
# CONFIG_USBPCWATCHDOG is not set |
||||
CONFIG_USB_ADM5120_HCD=m |
||||
# CONFIG_USB_ALI_M5632 is not set |
||||
# CONFIG_USB_AN2720 is not set |
||||
# CONFIG_USB_CATC is not set |
||||
CONFIG_USB_DEBUG=y |
||||
CONFIG_USB_EHCI_HCD=m |
||||
# CONFIG_USB_KAWETH is not set |
||||
# CONFIG_USB_NET_DM9601 is not set |
||||
# CONFIG_USB_NET_GL620A is not set |
||||
# CONFIG_USB_NET_MCS7830 is not set |
||||
# CONFIG_USB_NET_PLUSB is not set |
||||
# CONFIG_USB_NET_RNDIS_HOST is not set |
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set |
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set |
||||
CONFIG_USB_OHCI_HCD=m |
||||
# CONFIG_USB_PEGASUS is not set |
||||
# CONFIG_USB_R8A66597_HCD is not set |
||||
# CONFIG_USB_SERIAL is not set |
||||
# CONFIG_USB_UHCI_HCD is not set |
||||
# CONFIG_USER_NS is not set |
||||
# CONFIG_VGASTATE is not set |
||||
CONFIG_VIDEO_V4L1=y |
||||
CONFIG_VM_EVENT_COUNTERS=y |
||||
CONFIG_YAFFS_9BYTE_TAGS=y |
||||
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set |
||||
CONFIG_YAFFS_AUTO_YAFFS2=y |
||||
CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 |
||||
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set |
||||
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set |
||||
CONFIG_YAFFS_FS=y |
||||
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y |
||||
CONFIG_YAFFS_YAFFS1=y |
||||
CONFIG_YAFFS_YAFFS2=y |
||||
# CONFIG_ZD1211RW is not set |
||||
CONFIG_ZONE_DMA_FLAG=0 |
Loading…
Reference in new issue