The FritzBox 7312 is also known as 1&1 WLAN-MODEM. The device is almost the same as FB7330, but only one ETH-Port and no USB. Hardware SoC: Lantiq Xway ARX188 PSB 50812 EL RAM: 64MB DDR1 (Zentel A4S12D40FTP-G5) Ethernet: Atheros 8030 Wireless: Atheros AR9227 b/g/n 2x2 DSL: Lantiq ADSL2+ DECT: Dialog SC14441 Buttons: WiFi, DECT LEDs: Power/DSL, Fon, DECT, WLAN, Info LEDs Power: GPIO#44 (active low) Internet: GPIO#47 (active low) DECT: GPIO#38 (active low) WLAN: GPIO#37 (active low) Info: GPIO#35 (active low) The Fon LED is labeled as internet in avm gpl sources. Buttons WLAN: GPIO#1 (active low) DECT: GPIO#2 (active low) Phy GPIO#03: 25 MHz GPIO#34: Reset (active low) GPIO#39: Int GPIO#42: MII MDIO GPIO#43: MII MDC PCIe GPIO#21: reset (active low) Installation: To install OpenWrt via Eva bootloader, within the first seconds after power on a ftp connection need to be established to the FRITZ!Box at 192.168.178.1 and the the following ftp commands need to be run: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put /path/to/openwrt-lantiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1 ftp> quote REBOOT Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>master
Johann Neuhauser
7 years ago
committed by
Mathias Kresin
parent
f2f7802148
commit
02d53e6a21
@ -0,0 +1,181 @@ |
||||
/dts-v1/; |
||||
|
||||
#include "ar9.dtsi" |
||||
|
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9"; |
||||
model = "FritzBox 7312 (1&1 WLAN-MODEM)"; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyLTQ0,115200"; |
||||
}; |
||||
|
||||
aliases { |
||||
led-boot = &power; |
||||
led-failsafe = &power; |
||||
led-running = &power; |
||||
|
||||
led-internet = &info_green; |
||||
led-dsl = &power; |
||||
led-wifi = &wlan; |
||||
}; |
||||
|
||||
memory@0 { |
||||
reg = <0x0 0x4000000>; |
||||
}; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <100>; |
||||
|
||||
wlan { |
||||
label = "wlan"; |
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RFKILL>; |
||||
}; |
||||
dect { |
||||
label = "dect"; |
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_PHONE>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power: power { |
||||
label = "fritz7312:green:power"; |
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>; |
||||
default-state = "keep"; |
||||
}; |
||||
voice { |
||||
label = "fritz7312:green:fon"; |
||||
gpios = <&gpio 47 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
dect { |
||||
label = "fritz7312:green:dect"; |
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
wlan: wlan { |
||||
label = "fritz7312:green:wlan"; |
||||
gpios = <&gpio 37 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
info_green: info_green { |
||||
label = "fritz7312:green:info"; |
||||
gpios = <&gpio 35 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&gpio { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&state_default>; |
||||
|
||||
state_default: pinmux { |
||||
pci { |
||||
lantiq,groups = "gnt1", "req1", "req2", "req4", "gnt2", "gnt3", "gnt4"; |
||||
lantiq,function = "pci"; |
||||
}; |
||||
pci-in { |
||||
lantiq,groups = "req1", "req2", "req4"; |
||||
lantiq,output = <0>; |
||||
lantiq,open-drain = <1>; |
||||
lantiq,pull = <2>; |
||||
}; |
||||
pci-out { |
||||
lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4"; |
||||
lantiq,output = <1>; |
||||
lantiq,pull = <0>; |
||||
}; |
||||
ar8030-intr { |
||||
lantiq,groups = "exin3"; |
||||
lantiq,function = "exin"; |
||||
lantiq,pull = <2>; |
||||
lantiq,output = <0>; |
||||
}; |
||||
ar8030-clk { |
||||
lantiq,groups = "clkout2"; |
||||
lantiq,output = <1>; |
||||
lantiq,open-drain; |
||||
}; |
||||
ar8030-rst { |
||||
lantiq,pins = "io34"; |
||||
lantiq,output = <1>; |
||||
lantiq,pull = <2>; |
||||
lantiq,open-drain; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&gsw { |
||||
phy-mode = "rmii"; |
||||
phy-handle = <&phy0>; |
||||
mtd-mac-address = <&ath9k_cal 0xa91>; |
||||
mtd-mac-address-increment = <(-2)>; |
||||
|
||||
mdio-bus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
reg = <0>; |
||||
|
||||
phy0: ethernet-phy@0 { |
||||
reg = <0>; |
||||
reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&localbus { |
||||
nor@0 { |
||||
compatible = "lantiq,nor"; |
||||
bank-width = <2>; |
||||
reg = <0 0x0 0x1000000>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
ath9k_cal: partition@0 { |
||||
label = "urlader"; |
||||
reg = <0x00000 0x20000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@20000 { |
||||
label = "firmware"; |
||||
reg = <0x20000 0xf60000>; |
||||
}; |
||||
|
||||
partition@f80000 { |
||||
label = "tffs (1)"; |
||||
reg = <0xf80000 0x40000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@fc0000 { |
||||
label = "tffs (2)"; |
||||
reg = <0xfc0000 0x40000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pci0 { |
||||
status = "okay"; |
||||
req-mask = <0xf>; |
||||
gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>; |
||||
|
||||
wifi@0,0 { |
||||
compatible = "pci0,0"; |
||||
reg = <0x7000 0 0 0 0>; |
||||
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ |
||||
}; |
||||
}; |
||||
Loading…
Reference in new issue