YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2. Short specification: - 650/600/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz with external PA, up to 29 dBm - 2x internal 5 dBi omni antennas - 4x LED, 1x button - UART (JP1) header on PCB Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Flash instruction under vendor fimrware, using telnet/SSH: 1. Connect PC with 192.168.1.x address to WAN port 2. Power up device, enter failsafe mode with button (no LED indicator!) 3. Change root password and reboot (mount_root, passwd ..., reboot -f) 4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP 5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 6. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9f050000" - mtd erase firmware - mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>master
parent
16afa08d19
commit
01dda0659e
@ -0,0 +1,123 @@ |
||||
/*
|
||||
* YunCore AP90Q board support |
||||
* |
||||
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/gpio.h> |
||||
#include <linux/platform_device.h> |
||||
|
||||
#include <asm/mach-ath79/ath79.h> |
||||
#include <asm/mach-ath79/ar71xx_regs.h> |
||||
|
||||
#include "common.h" |
||||
#include "dev-eth.h" |
||||
#include "dev-gpio-buttons.h" |
||||
#include "dev-leds-gpio.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-usb.h" |
||||
#include "dev-wmac.h" |
||||
#include "machtypes.h" |
||||
|
||||
#define AP90Q_GPIO_LED_WAN 4 |
||||
#define AP90Q_GPIO_LED_WLAN 12 |
||||
#define AP90Q_GPIO_LED_LAN 16 |
||||
|
||||
#define AP90Q_GPIO_BTN_RESET 17 |
||||
|
||||
#define AP90Q_KEYS_POLL_INTERVAL 20 |
||||
#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL) |
||||
|
||||
static struct gpio_led ap90q_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "ap90q:green:lan", |
||||
.gpio = AP90Q_GPIO_LED_LAN, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "ap90q:green:wan", |
||||
.gpio = AP90Q_GPIO_LED_WAN, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "ap90q:green:wlan", |
||||
.gpio = AP90Q_GPIO_LED_WLAN, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
static struct gpio_keys_button ap90q_gpio_keys[] __initdata = { |
||||
{ |
||||
.desc = "reset", |
||||
.type = EV_KEY, |
||||
.code = KEY_RESTART, |
||||
.debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = AP90Q_GPIO_BTN_RESET, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
static void __init ap90q_gpio_setup(void) |
||||
{ |
||||
/* For LED on GPIO4 */ |
||||
ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); |
||||
|
||||
ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true); |
||||
ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true); |
||||
ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true); |
||||
|
||||
/* Mute LEDs on boot */ |
||||
gpio_set_value(AP90Q_GPIO_LED_LAN, 1); |
||||
gpio_set_value(AP90Q_GPIO_LED_WAN, 1); |
||||
|
||||
ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0); |
||||
ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0); |
||||
ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0); |
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio), |
||||
ap90q_leds_gpio); |
||||
|
||||
ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL, |
||||
ARRAY_SIZE(ap90q_gpio_keys), |
||||
ap90q_gpio_keys); |
||||
} |
||||
|
||||
static void __init ap90q_setup(void) |
||||
{ |
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); |
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); |
||||
|
||||
ath79_register_m25p80(NULL); |
||||
|
||||
ap90q_gpio_setup(); |
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false); |
||||
|
||||
ath79_register_mdio(0, 0x0); |
||||
|
||||
ath79_switch_data.phy4_mii_en = 1; |
||||
ath79_switch_data.phy_poll_mask |= BIT(4); |
||||
|
||||
/* LAN */ |
||||
ath79_eth1_data.duplex = DUPLEX_FULL; |
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
||||
ath79_eth1_data.speed = SPEED_1000; |
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); |
||||
ath79_register_eth(1); |
||||
|
||||
/* WAN */ |
||||
ath79_eth0_data.duplex = DUPLEX_FULL; |
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
||||
ath79_eth0_data.speed = SPEED_100; |
||||
ath79_eth0_data.phy_mask = BIT(4); |
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); |
||||
ath79_register_eth(0); |
||||
|
||||
ath79_register_wmac(art, NULL); |
||||
} |
||||
|
||||
MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup); |
Loading…
Reference in new issue