brcm2708: drop support for 3.3 kernel

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37236

target/linux/brcm2708/config-3.3

@@ -1,248 +0,0 @@
-# CONFIG_AIO is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_BCM2708=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_AVERAGE=y
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BCM2708_GPIO=y
-# CONFIG_BCM2708_NOL2CACHE is not set
-CONFIG_BCM2708_VCHIQ=y
-CONFIG_BCM2708_VCMEM=y
-CONFIG_BCM2708_WDT=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CPU_V6=y
-CONFIG_CRC16=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEVTMPFS=y
-CONFIG_DNOTIFY=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FB=y
-CONFIG_FB_BCM2708=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_CONSOLE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IOSCHED_CFQ=y
-CONFIG_JBD2=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KTIME_SCALAR=y
-# CONFIG_LCD_AMS369FG06 is not set
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MACH_BCM2708=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_MFD_T7L66XB is not set
-CONFIG_MMC=y
-# CONFIG_MMC_BCM2708 is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_BCM2708=y
-CONFIG_MMC_SDHCI_BCM2708_DMA=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MTD is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MACH_MEMORY_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NO_HZ=y
-CONFIG_OABI_COMPAT=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PDA_POWER is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RAW_DRIVER=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_STAGING is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_UID16 is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_COMMON=y
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-CONFIG_USB_DWCOTG=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UAS=y
-CONFIG_USB_USBNET=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0

target/linux/brcm2708/patches-3.3/0003-bcm2708-watchdog-driver.patch

@@ -1,436 +0,0 @@
-From ed8c2d720954efc5a440912292ed11da2f50aaea Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Tue, 17 Jan 2012 19:20:57 +0000
-Subject: [PATCH 3/7] bcm2708 watchdog driver
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
----
- drivers/watchdog/Kconfig        |    6 +
- drivers/watchdog/Makefile       |    1 +
- drivers/watchdog/bcm2708_wdog.c |  385 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 392 insertions(+), 0 deletions(-)
- create mode 100644 drivers/watchdog/bcm2708_wdog.c
-
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 86b0735..7675ebc 100644
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -348,6 +348,12 @@ config IMX2_WDT
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called imx2_wdt.
- 
-+config BCM2708_WDT
-+	tristate "BCM2708 Watchdog"
-+	depends on ARCH_BCM2708
-+	help
-+	  Enables BCM2708 watchdog support.
-+
- # AVR32 Architecture
- 
- config AT32AP700X_WDT
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index 55bd574..803f0bc 100644
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
- obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
- obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
- obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
-+obj-$(CONFIG_BCM2708_WDT) += bcm2708_wdog.o
- 
- # AVR32 Architecture
- obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-diff --git a/drivers/watchdog/bcm2708_wdog.c b/drivers/watchdog/bcm2708_wdog.c
-new file mode 100644
-index 0000000..dd33c35
---- /dev/null
-+++ b/drivers/watchdog/bcm2708_wdog.c
-@@ -0,0 +1,385 @@
-+/*
-+ *	Broadcom BCM2708 watchdog driver.
-+ *
-+ *	(c) Copyright 2010 Broadcom Europe Ltd
-+ *
-+ *	This program is free software; you can redistribute it and/or
-+ *	modify it under the terms of the GNU General Public License
-+ *	as published by the Free Software Foundation; either version
-+ *	2 of the License, or (at your option) any later version.
-+ *
-+ *      BCM2708 watchdog driver. Loosely based on wdt driver.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/fs.h>
-+#include <linux/ioport.h>
-+#include <linux/notifier.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <mach/platform.h>
-+
-+#include <asm/system.h>
-+
-+#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
-+#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
-+
-+static unsigned long wdog_is_open;
-+static uint32_t wdog_ticks;	       /* Ticks to load into wdog timer */
-+static char expect_close;
-+
-+/*
-+ *	Module parameters
-+ */
-+
-+#define WD_TIMO 10		       /* Default heartbeat = 60 seconds */
-+static int heartbeat = WD_TIMO;	       /* Heartbeat in seconds */
-+
-+module_param(heartbeat, int, 0);
-+MODULE_PARM_DESC(heartbeat,
-+	"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
-+				__MODULE_STRING(WD_TIMO) ")");
-+
-+static int nowayout = WATCHDOG_NOWAYOUT;
-+module_param(nowayout, int, 0);
-+MODULE_PARM_DESC(nowayout,
-+	"Watchdog cannot be stopped once started (default="
-+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-+
-+static DEFINE_SPINLOCK(wdog_lock);
-+
-+/**
-+ *	Start the watchdog driver.
-+ */
-+
-+static int wdog_start(unsigned long timeout)
-+{
-+	uint32_t cur;
-+	unsigned long flags;
-+	spin_lock_irqsave(&wdog_lock, flags);
-+
-+	/* enable the watchdog */
-+	iowrite32(PM_PASSWORD | (timeout & PM_WDOG_TIME_SET), 
-+		  __io_address(PM_WDOG));
-+	cur = ioread32(__io_address(PM_RSTC));
-+	iowrite32(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
-+		  PM_RSTC_WRCFG_FULL_RESET, __io_address(PM_RSTC));
-+
-+	spin_unlock_irqrestore(&wdog_lock, flags);
-+	return 0;
-+}
-+
-+/**
-+ *	Stop the watchdog driver.
-+ */
-+
-+static int wdog_stop(void)
-+{
-+	iowrite32(PM_PASSWORD | PM_RSTC_RESET, __io_address(PM_RSTC));
-+	printk(KERN_INFO "watchdog stopped\n");
-+	return 0;
-+}
-+
-+/**
-+ *	Reload counter one with the watchdog heartbeat. We don't bother
-+ *	reloading the cascade counter.
-+ */
-+
-+static void wdog_ping(void)
-+{
-+	wdog_start(wdog_ticks);
-+}
-+
-+/**
-+ *	@t:		the new heartbeat value that needs to be set.
-+ *
-+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
-+ *	value is incorrect we keep the old value and return -EINVAL. If
-+ *	successful we return 0.
-+ */
-+
-+static int wdog_set_heartbeat(int t)
-+{
-+	if (t < 1 || t > WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET))
-+		return -EINVAL;
-+
-+	heartbeat = t;
-+	wdog_ticks = SECS_TO_WDOG_TICKS(t);
-+	return 0;
-+}
-+
-+/**
-+ *	@file: file handle to the watchdog
-+ *	@buf: buffer to write (unused as data does not matter here
-+ *	@count: count of bytes
-+ *	@ppos: pointer to the position to write. No seeks allowed
-+ *
-+ *	A write to a watchdog device is defined as a keepalive signal.
-+ *	
-+ *      if 'nowayout' is set then normally a close() is ignored. But
-+ *      if you write 'V' first then the close() will stop the timer.
-+ */
-+
-+static ssize_t wdog_write(struct file *file, const char __user *buf,
-+						size_t count, loff_t *ppos)
-+{
-+	if (count) {
-+		if (!nowayout) {
-+			size_t i;
-+
-+			/* In case it was set long ago */
-+			expect_close = 0;
-+
-+			for (i = 0; i != count; i++) {
-+				char c;
-+				if (get_user(c, buf + i))
-+					return -EFAULT;
-+				if (c == 'V')
-+					expect_close = 42;
-+			}
-+		}
-+		wdog_ping();
-+	}
-+	return count;
-+}
-+
-+static int wdog_get_status(void)
-+{
-+	unsigned long flags;
-+	int status = 0;
-+	spin_lock_irqsave(&wdog_lock, flags);
-+	/* FIXME: readback reset reason */
-+	spin_unlock_irqrestore(&wdog_lock, flags);
-+	return status;
-+}
-+
-+static uint32_t wdog_get_remaining(void)
-+{
-+	uint32_t ret = ioread32(__io_address(PM_WDOG));
-+	return ret & PM_WDOG_TIME_SET;
-+}
-+
-+/**
-+ *	@file: file handle to the device
-+ *	@cmd: watchdog command
-+ *	@arg: argument pointer
-+ *
-+ *	The watchdog API defines a common set of functions for all watchdogs
-+ *	according to their available features. We only actually usefully support
-+ *	querying capabilities and current status.
-+ */
-+
-+static long wdog_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int __user *p = argp;
-+	int new_heartbeat;
-+	int status;
-+	int options;
-+	uint32_t remaining;
-+
-+	struct watchdog_info ident = {
-+		.options =		WDIOF_SETTIMEOUT|
-+					WDIOF_MAGICCLOSE|
-+					WDIOF_KEEPALIVEPING,
-+		.firmware_version =	1,
-+		.identity =		"BCM2708",
-+	};
-+
-+	switch (cmd) {
-+	case WDIOC_GETSUPPORT:
-+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
-+	case WDIOC_GETSTATUS:
-+		status = wdog_get_status();
-+		return put_user(status, p);
-+	case WDIOC_GETBOOTSTATUS:
-+		return put_user(0, p);
-+	case WDIOC_KEEPALIVE:
-+		wdog_ping();
-+		return 0;
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(new_heartbeat, p))
-+			return -EFAULT;
-+		if (wdog_set_heartbeat(new_heartbeat))
-+			return -EINVAL;
-+		wdog_ping();
-+		/* Fall */
-+	case WDIOC_GETTIMEOUT:
-+		return put_user(heartbeat, p);
-+	case WDIOC_GETTIMELEFT:
-+		remaining = WDOG_TICKS_TO_SECS(wdog_get_remaining());
-+		return put_user(remaining, p);
-+	case WDIOC_SETOPTIONS:
-+		if (get_user(options, p))
-+			return -EFAULT;
-+		if (options & WDIOS_DISABLECARD)
-+			wdog_stop();
-+		if (options & WDIOS_ENABLECARD)
-+			wdog_start(wdog_ticks);
-+		return 0;
-+	default:
-+		return -ENOTTY;
-+	}
-+}
-+
-+/**
-+ *	@inode: inode of device
-+ *	@file: file handle to device
-+ *
-+ *	The watchdog device has been opened. The watchdog device is single
-+ *	open and on opening we load the counters.
-+ */
-+
-+static int wdog_open(struct inode *inode, struct file *file)
-+{
-+	if (test_and_set_bit(0, &wdog_is_open))
-+		return -EBUSY;
-+	/*
-+	 *	Activate
-+	 */
-+	wdog_start(wdog_ticks);
-+	return nonseekable_open(inode, file);
-+}
-+
-+/**
-+ *	@inode: inode to board
-+ *	@file: file handle to board
-+ *
-+ *	The watchdog has a configurable API. There is a religious dispute
-+ *	between people who want their watchdog to be able to shut down and
-+ *	those who want to be sure if the watchdog manager dies the machine
-+ *	reboots. In the former case we disable the counters, in the latter
-+ *	case you have to open it again very soon.
-+ */
-+
-+static int wdog_release(struct inode *inode, struct file *file)
-+{
-+	if (expect_close == 42) {
-+		wdog_stop();
-+	} else {
-+		printk(KERN_CRIT
-+		 "wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
-+		wdog_ping();
-+	}
-+	clear_bit(0, &wdog_is_open);
-+	expect_close = 0;
-+	return 0;
-+}
-+
-+/**
-+ *	@this: our notifier block
-+ *	@code: the event being reported
-+ *	@unused: unused
-+ *
-+ *	Our notifier is called on system shutdowns. Turn the watchdog
-+ *	off so that it does not fire during the next reboot.
-+ */
-+
-+static int wdog_notify_sys(struct notifier_block *this, unsigned long code,
-+	void *unused)
-+{
-+	if (code == SYS_DOWN || code == SYS_HALT)
-+		wdog_stop();
-+	return NOTIFY_DONE;
-+}
-+
-+/*
-+ *	Kernel Interfaces
-+ */
-+
-+
-+static const struct file_operations wdog_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.write		= wdog_write,
-+	.unlocked_ioctl	= wdog_ioctl,
-+	.open		= wdog_open,
-+	.release	= wdog_release,
-+};
-+
-+static struct miscdevice wdog_miscdev = {
-+	.minor	= WATCHDOG_MINOR,
-+	.name	= "watchdog",
-+	.fops	= &wdog_fops,
-+};
-+
-+/*
-+ *	The WDT card needs to learn about soft shutdowns in order to
-+ *	turn the timebomb registers off.
-+ */
-+
-+static struct notifier_block wdog_notifier = {
-+	.notifier_call = wdog_notify_sys,
-+};
-+
-+/**
-+ *	cleanup_module:
-+ *
-+ *	Unload the watchdog. You cannot do this with any file handles open.
-+ *	If your watchdog is set to continue ticking on close and you unload
-+ *	it, well it keeps ticking. We won't get the interrupt but the board
-+ *	will not touch PC memory so all is fine. You just have to load a new
-+ *	module in 60 seconds or reboot.
-+ */
-+
-+static void __exit wdog_exit(void)
-+{
-+	misc_deregister(&wdog_miscdev);
-+	unregister_reboot_notifier(&wdog_notifier);
-+}
-+
-+static int __init wdog_init(void)
-+{
-+	int ret;
-+
-+	/* Check that the heartbeat value is within it's range;
-+	   if not reset to the default */
-+	if (wdog_set_heartbeat(heartbeat)) {
-+		wdog_set_heartbeat(WD_TIMO);
-+		printk(KERN_INFO "bcm2708_wdog: heartbeat value must be "
-+			"0 < heartbeat < %d, using %d\n", 
-+				WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
-+				WD_TIMO);
-+	}
-+
-+	ret = register_reboot_notifier(&wdog_notifier);
-+	if (ret) {
-+		printk(KERN_ERR
-+		      "wdt: cannot register reboot notifier (err=%d)\n", ret);
-+		goto out_reboot;
-+	}
-+
-+	ret = misc_register(&wdog_miscdev);
-+	if (ret) {
-+		printk(KERN_ERR
-+			"wdt: cannot register miscdev on minor=%d (err=%d)\n",
-+							WATCHDOG_MINOR, ret);
-+		goto out_misc;
-+	}
-+
-+	printk(KERN_INFO "bcm2708 watchdog, heartbeat=%d sec (nowayout=%d)\n",
-+		heartbeat, nowayout);
-+	return 0;
-+
-+out_misc:
-+	unregister_reboot_notifier(&wdog_notifier);
-+out_reboot:
-+	return ret;
-+}
-+
-+module_init(wdog_init);
-+module_exit(wdog_exit);
-+
-+MODULE_AUTHOR("Luke Diamand");
-+MODULE_DESCRIPTION("Driver for BCM2708 watchdog");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS_MISCDEV(TEMP_MINOR);
-+MODULE_LICENSE("GPL");
-+
--- 
-1.7.5.4
-

target/linux/brcm2708/patches-3.3/0006-Allow-mac-address-to-be-set-in-smsc95xx.patch

@@ -1,96 +0,0 @@
-From dd6079fc871e99e4b0345d3fe27701dce5dcc7d0 Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Tue, 17 Jan 2012 19:22:59 +0000
-Subject: [PATCH 6/7] Allow mac address to be set in smsc95xx
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
----
- drivers/net/usb/smsc95xx.c |   56 ++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 56 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
-index f74f3ce..5a2e12b 100644
---- a/drivers/net/usb/smsc95xx.c
-+++ b/drivers/net/usb/smsc95xx.c
-@@ -46,6 +46,7 @@
- #define SMSC95XX_INTERNAL_PHY_ID	(1)
- #define SMSC95XX_TX_OVERHEAD		(8)
- #define SMSC95XX_TX_OVERHEAD_CSUM	(12)
-+#define MAC_ADDR_LEN                    (6)
- 
- struct smsc95xx_priv {
- 	u32 mac_cr;
-@@ -63,6 +64,10 @@ static int turbo_mode = true;
- module_param(turbo_mode, bool, 0644);
- MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
- 
-+static char *macaddr = ":";
-+module_param(macaddr, charp, 0);
-+MODULE_PARM_DESC(macaddr, "MAC address");
-+
- static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
- {
- 	u32 *buf = kmalloc(4, GFP_KERNEL);
-@@ -600,8 +605,59 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
- 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
- }
- 
-+/* Check the macaddr module parameter for a MAC address */
-+static int smsc95xx_is_macaddr_param(struct usbnet *dev, u8 *dev_mac)
-+{
-+       int i, j, got_num, num;
-+       u8 mtbl[MAC_ADDR_LEN];
-+
-+       if (macaddr[0] == ':')
-+               return 0;
-+
-+       i = 0;
-+       j = 0;
-+       num = 0;
-+       got_num = 0;
-+       while (j < MAC_ADDR_LEN) {
-+               if (macaddr[i] && macaddr[i] != ':') {
-+                       got_num++;
-+                       if ('0' <= macaddr[i] && macaddr[i] <= '9')
-+                               num = num * 16 + macaddr[i] - '0';
-+                       else if ('A' <= macaddr[i] && macaddr[i] <= 'F')
-+                               num = num * 16 + 10 + macaddr[i] - 'A';
-+                       else if ('a' <= macaddr[i] && macaddr[i] <= 'f')
-+                               num = num * 16 + 10 + macaddr[i] - 'a';
-+                       else
-+                               break;
-+                       i++;
-+               } else if (got_num == 2) {
-+                       mtbl[j++] = (u8) num;
-+                       num = 0;
-+                       got_num = 0;
-+                       i++;
-+               } else {
-+                       break;
-+               }
-+       }
-+
-+       if (j == MAC_ADDR_LEN) {
-+               netif_dbg(dev, ifup, dev->net, "Overriding MAC address with: "
-+               "%02x:%02x:%02x:%02x:%02x:%02x\n", mtbl[0], mtbl[1], mtbl[2],
-+                                               mtbl[3], mtbl[4], mtbl[5]);
-+               for (i = 0; i < MAC_ADDR_LEN; i++)
-+                       dev_mac[i] = mtbl[i];
-+               return 1;
-+       } else {
-+               return 0;
-+       }
-+}
-+
- static void smsc95xx_init_mac_address(struct usbnet *dev)
- {
-+       /* Check module parameters */
-+       if (smsc95xx_is_macaddr_param(dev, dev->net->dev_addr))
-+               return;
-+
- 	/* try reading mac address from EEPROM */
- 	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
- 			dev->net->dev_addr) == 0) {
--- 
-1.7.5.4
-

target/linux/brcm2708/patches-3.3/0510-fix_divdi3.patch

@@ -1,11 +0,0 @@
---- a/arch/arm/lib/Makefile
-+++ b/arch/arm/lib/Makefile
-@@ -14,7 +14,7 @@ lib-y		:= backtrace.o changebit.o csumip
- 		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
- 		   ucmpdi2.o lib1funcs.o div64.o                      \
- 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o  \
--		   call_with_stack.o
-+		   call_with_stack.o divdi3.o
- 
- mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-