|
|
|
|
CONFIG_ATH79_DEV_AP9X_PCI=y
|
|
|
|
|
CONFIG_ATH79_DEV_ETH=y
|
|
|
|
|
CONFIG_ATH79_DEV_GPIO_BUTTONS=y
|
|
|
|
|
CONFIG_ATH79_DEV_LEDS_GPIO=y
|
|
|
|
|
CONFIG_ATH79_DEV_M25P80=y
|
|
|
|
|
CONFIG_ATH79_DEV_NFC=y
|
|
|
|
|
CONFIG_ATH79_DEV_SPI=y
|
|
|
|
|
CONFIG_ATH79_DEV_USB=y
|
|
|
|
|
CONFIG_ATH79_DEV_WMAC=y
|
|
|
|
|
CONFIG_ATH79_MACH_A60=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALFA_AP120C=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALFA_AP96=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALFA_NX=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALL0258N=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALL0315N=y
|
|
|
|
|
CONFIG_ATH79_MACH_ANTMINER_S1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ANTMINER_S3=y
|
|
|
|
|
CONFIG_ATH79_MACH_ANTROUTER_R1=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP121=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP121F=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP132=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP136=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP143=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP147=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP152=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP531B0=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP90Q=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP91_5G=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP96=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C58_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C7=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARDUINO_YUN=y
|
|
|
|
|
CONFIG_ATH79_MACH_AW_NR580=y
|
|
|
|
|
CONFIG_ATH79_MACH_BHR_4GRV2=y
|
|
|
|
|
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
|
|
|
|
|
CONFIG_ATH79_MACH_BSB=y
|
|
|
|
|
CONFIG_ATH79_MACH_C55=y
|
|
|
|
|
CONFIG_ATH79_MACH_CAP324=y
|
|
|
|
|
CONFIG_ATH79_MACH_CAP4200AG=y
|
|
|
|
|
CONFIG_ATH79_MACH_CARAMBOLA2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E316N_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E320N_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E355AC=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E375AC=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E380AC_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E380AC_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E520N=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E530N=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE505N=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE510=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE830=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE870=y
|
|
|
|
|
CONFIG_ATH79_MACH_CR3000=y
|
|
|
|
|
CONFIG_ATH79_MACH_CR5000=y
|
|
|
|
|
CONFIG_ATH79_MACH_DAP_2695_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DB120=y
|
|
|
|
|
CONFIG_ATH79_MACH_DGL_5500_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DHP_1565_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_505_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_825_B1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_825_C1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_869_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
|
|
|
|
|
CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
|
|
|
|
|
CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
|
|
|
|
|
CONFIG_ATH79_MACH_DR342=y
|
|
|
|
|
CONFIG_ATH79_MACH_DR344=y
|
|
|
|
|
CONFIG_ATH79_MACH_DR531=y
|
|
|
|
|
CONFIG_ATH79_MACH_DRAGINO2=y
|
|
|
|
|
CONFIG_ATH79_MACH_E2100L=y
|
|
|
|
|
CONFIG_ATH79_MACH_EAP120=y
|
|
|
|
|
CONFIG_ATH79_MACH_EAP300V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_EAP7660D=y
|
|
|
|
|
CONFIG_ATH79_MACH_EL_M150=y
|
|
|
|
|
CONFIG_ATH79_MACH_EL_MINI=y
|
|
|
|
|
CONFIG_ATH79_MACH_ENS202EXT=y
|
|
|
|
|
CONFIG_ATH79_MACH_EPG5000=y
|
|
|
|
|
CONFIG_ATH79_MACH_ESR1750=y
|
|
|
|
|
CONFIG_ATH79_MACH_ESR900=y
|
|
|
|
|
CONFIG_ATH79_MACH_EW_BALIN=y
|
|
|
|
|
CONFIG_ATH79_MACH_EW_DORIN=y
|
|
|
|
|
CONFIG_ATH79_MACH_F9K1115V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_FRITZ300E=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR150=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR300=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR300M=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR750=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_DOMINO=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_INET=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_MIFI=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_USB150=y
|
|
|
|
|
CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_GS_OOLITE=y
|
|
|
|
|
CONFIG_ATH79_MACH_HIWIFI_HC6361=y
|
|
|
|
|
CONFIG_ATH79_MACH_HORNET_UB=y
|
|
|
|
|
CONFIG_ATH79_MACH_JA76PF=y
|
|
|
|
|
CONFIG_ATH79_MACH_JWAP003=y
|
|
|
|
|
CONFIG_ATH79_MACH_JWAP230=y
|
|
|
|
|
CONFIG_ATH79_MACH_LIMA=y
|
|
|
|
|
CONFIG_ATH79_MACH_MC_MAC1200R=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR12=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR16=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR1750=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR600=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR900=y
|
|
|
|
|
CONFIG_ATH79_MACH_MYNET_N600=y
|
|
|
|
|
CONFIG_ATH79_MACH_MYNET_N750=y
|
|
|
|
|
CONFIG_ATH79_MACH_MYNET_REXT=y
|
|
|
|
|
CONFIG_ATH79_MACH_MZK_W04NU=y
|
|
|
|
|
CONFIG_ATH79_MACH_MZK_W300NH=y
|
ar71xx: add support for ALFA Network N5Q
ALFA Network N5Q is a successor of previous model, the N5 (outdoor
CPE/AP, based on Atheros AR7240 + AR9280). New version is based on
Atheros AR9344.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm
- 8x LED (7 are driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- header for optional 802.3at/af PoE module
- DC jack for main power input (optional, not installed by default)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmare which is based
on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
|
|
|
CONFIG_ATH79_MACH_N5Q=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM2P=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM5P=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM5P_AC=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM5P_ACv2=y
|
|
|
|
|
CONFIG_ATH79_MACH_OMY_G1=y
|
|
|
|
|
CONFIG_ATH79_MACH_OMY_X1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ONION_OMEGA=y
|
|
|
|
|
CONFIG_ATH79_MACH_PB42=y
|
|
|
|
|
CONFIG_ATH79_MACH_PB44=y
|
|
|
|
|
CONFIG_ATH79_MACH_PQI_AIR_PEN=y
|
|
|
|
|
CONFIG_ATH79_MACH_QIHOO_C301=y
|
ar71xx: add support for ALFA Network R36A
ALFA Network R36A is a successor of the previous model, the R36 (Ralink
RT3050F based). New version is based on Qualcomm/Atheros QCA9531 v2.
Specification:
- 650/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R (QCA9531) 2.4 GHz, 2x u.fl connectors on PCB
- 1x USB 2.0 (power controlled by GPIO)
- 6x LED (5 of them are driven by GPIO)
- 2x button (reset, wifi/wps)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- DC jack for main power input (12 V)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
|
|
|
CONFIG_ATH79_MACH_R36A=y
|
|
|
|
|
CONFIG_ATH79_MACH_R602N=y
|
|
|
|
|
CONFIG_ATH79_MACH_RE355=y
|
|
|
|
|
CONFIG_ATH79_MACH_RE450=y
|
|
|
|
|
CONFIG_ATH79_MACH_RME_EG200=y
|
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344.
There are available 3 other models in RUT9xx series: RUT905, RUT950 and
RUT955, which differ in availability of additional I/O ports, built-in
GSM modem type, GPS antenna and other features. FCC ID of the RUT950
model (LTE module built-in): 2AET4-RUT950.
This patch adds support for the RUT900 model only but can be easily
extended to cover whole series. Also, as there are several different
3/4G modules (Huawei, Quectel, Telit) used in whole series, packages
required for WWAN support are not included by default. It is up to the
user to install required software for built-in modem.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA
- built-in 3G module (example: Telit HE910-D)
- 2x miniSIM slot
- 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G)
- PCA9539 16-bit GPIO I2C expander
- 12x LED (4 are driven by AR9344, 7 by PCA9539)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- UART available on PCB edge connector
Serial console pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1".
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
|
|
|
CONFIG_ATH79_MACH_RUT9XX=y
|
|
|
|
|
CONFIG_ATH79_MACH_RW2458N=y
|
|
|
|
|
CONFIG_ATH79_MACH_SC1750=y
|
|
|
|
|
CONFIG_ATH79_MACH_SC300M=y
|
|
|
|
|
CONFIG_ATH79_MACH_SC450=y
|
|
|
|
|
CONFIG_ATH79_MACH_SMART_300=y
|
|
|
|
|
CONFIG_ATH79_MACH_SOM9331=y
|
|
|
|
|
CONFIG_ATH79_MACH_SR3200=y
|
|
|
|
|
CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y
|
|
|
|
|
CONFIG_ATH79_MACH_TEW_673GRU=y
|
|
|
|
|
CONFIG_ATH79_MACH_TEW_732BR=y
|
|
|
|
|
CONFIG_ATH79_MACH_TEW_823DRU=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_MR3X20=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_MR6400=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WDR3500=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WDR4300=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WPA8630=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043ND=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043N_V5=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR2543N=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR703N=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR720N_V3=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR810N=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR810N_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR841N_V8=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR841N_V9=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR902AC_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR942N_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_TUBE2H=y
|
|
|
|
|
CONFIG_ATH79_MACH_UBNT=y
|
|
|
|
|
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
|
|
|
|
|
CONFIG_ATH79_MACH_UBNT_XM=y
|
|
|
|
|
CONFIG_ATH79_MACH_WEIO=y
|
|
|
|
|
CONFIG_ATH79_MACH_WHR_HP_G300N=y
|
|
|
|
|
CONFIG_ATH79_MACH_WLAE_AG300N=y
|
|
|
|
|
CONFIG_ATH79_MACH_WLR8100=y
|
|
|
|
|
CONFIG_ATH79_MACH_WNDAP360=y
|
|
|
|
|
CONFIG_ATH79_MACH_WNDR3700=y
|
|
|
|
|
CONFIG_ATH79_MACH_WNR2200=y
|
|
|
|
|
CONFIG_ATH79_MACH_WP543=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPE72=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ342=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ344=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ531=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ558=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ563=y
|
|
|
|
|
CONFIG_ATH79_MACH_WRT160NL=y
|
|
|
|
|
CONFIG_ATH79_MACH_WRT400N=y
|
|
|
|
|
CONFIG_ATH79_MACH_WRTNODE2Q=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_450HP2=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_AG300H=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_G450H=y
|
|
|
|
|
CONFIG_ATH79_MACH_XD3200=y
|
|
|
|
|
CONFIG_ATH79_MACH_ZBT_WE1526=y
|
|
|
|
|
CONFIG_ATH79_MACH_ZCN_1523H=y
|
|
|
|
|
CONFIG_ATH79_NVRAM=y
|
|
|
|
|
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
|
|
|
|
|
CONFIG_BLK_MQ_PCI=y
|
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344.
There are available 3 other models in RUT9xx series: RUT905, RUT950 and
RUT955, which differ in availability of additional I/O ports, built-in
GSM modem type, GPS antenna and other features. FCC ID of the RUT950
model (LTE module built-in): 2AET4-RUT950.
This patch adds support for the RUT900 model only but can be easily
extended to cover whole series. Also, as there are several different
3/4G modules (Huawei, Quectel, Telit) used in whole series, packages
required for WWAN support are not included by default. It is up to the
user to install required software for built-in modem.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA
- built-in 3G module (example: Telit HE910-D)
- 2x miniSIM slot
- 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G)
- PCA9539 16-bit GPIO I2C expander
- 12x LED (4 are driven by AR9344, 7 by PCA9539)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- UART available on PCB edge connector
Serial console pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1".
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
|
|
|
CONFIG_GPIO_PCA953X=y
|
|
|
|
|
# CONFIG_GPIO_PCA953X_IRQ is not set
|
|
|
|
|
CONFIG_HW_HAS_PCI=y
|
|
|
|
|
# CONFIG_LEDS_WNDR3700_USB is not set
|
|
|
|
|
CONFIG_MYLOADER=y
|
|
|
|
|
CONFIG_PCI=y
|
|
|
|
|
CONFIG_PCI_AR724X=y
|
|
|
|
|
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
|
|
|
|
CONFIG_PCI_DOMAINS=y
|
|
|
|
|
CONFIG_SERIAL_AR933X=y
|
|
|
|
|
CONFIG_SERIAL_AR933X_CONSOLE=y
|
|
|
|
|
CONFIG_SERIAL_AR933X_NR_UARTS=2
|
|
|
|
|
CONFIG_SOC_AR71XX=y
|
|
|
|
|
CONFIG_SOC_AR724X=y
|
|
|
|
|
CONFIG_SOC_AR913X=y
|
|
|
|
|
CONFIG_SOC_AR933X=y
|
|
|
|
|
CONFIG_SOC_AR934X=y
|
|
|
|
|
CONFIG_SOC_QCA953X=y
|
|
|
|
|
CONFIG_SOC_QCA955X=y
|
|
|
|
|
CONFIG_SOC_QCA956X=y
|
