freifunkist-firmware/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch

From fbc9fb0c2d30f2141e1b0b824f473276c3aef528 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 6 Aug 2014 17:53:24 +0200
Subject: [PATCH 24/57] MIPS: ralink: add mt7628an devicetree files

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/Kconfig               |    4 +
 arch/mips/ralink/dts/Makefile          |    1 +
 arch/mips/ralink/dts/mt7628an.dtsi     |  184 ++++++++++++++++++++++++++++++++
 arch/mips/ralink/dts/mt7628an_eval.dts |   54 ++++++++++
 4 files changed, 243 insertions(+)
 create mode 100644 arch/mips/ralink/dts/mt7628an.dtsi
 create mode 100644 arch/mips/ralink/dts/mt7628an_eval.dts

--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -75,6 +75,10 @@ choice
 		bool "MT7620A eval kit"
 		depends on SOC_MT7620
 
+	config DTB_MT7628AN_EVAL
+		bool "MT7620A eval kit"
+		depends on SOC_MT7620
+
 	config DTB_MT7621_EVAL
 		bool "MT7621 eval kit"
 		depends on SOC_MT7621
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_
 obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
 obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
 obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
+obj-$(CONFIG_DTB_MT7628AN_EVAL) := mt7628an_eval.dtb.o
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7628an.dtsi
@@ -0,0 +1,184 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mtk7628an-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	cpuintc: cpuintc@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,mt7620a-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		watchdog@120 {
+			compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
+			reg = <0x120 0x10>;
+
+			resets = <&rstctrl 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <24>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			resets = <&rstctrl 9>;
+			reset-names = "intc";
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+
+			ralink,intc-registers = <0x9c 0xa0
+						 0x6c 0xa4
+						 0x80 0x78>;
+		};
+
+		memc@300 {
+			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+
+			resets = <&rstctrl 20>;
+			reset-names = "mc";
+
+			interrupt-parent = <&intc>;
+			interrupts = <3>;
+		};
+
+		gpio@600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
+			reg = <0x600 0x100>;
+
+			gpio0: bank@0 {
+				reg = <0>;
+				compatible = "mtk,mt7621-gpio-bank";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio1: bank@1 {
+				reg = <1>;
+				compatible = "mtk,mt7621-gpio-bank";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio2: bank@2 {
+				reg = <2>;
+				compatible = "mtk,mt7621-gpio-bank";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		spi@b00 {
+			compatible = "ralink,mt7621-spi";
+			reg = <0xb00 0x100>;
+
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_pins>;
+
+			status = "disabled";
+		};
+
+		uartlite@c00 {
+			compatible = "ns16550a";
+			reg = <0xc00 0x100>;
+
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test;
+
+			resets = <&rstctrl 12>;
+			reset-names = "uartl";
+
+			interrupt-parent = <&intc>;
+			interrupts = <20>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+		};
+	};
+
+	pinctrl {
+		compatible = "ralink,rt2880-pinmux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+		state_default: pinctrl0 {
+		};
+		spi_pins: spi {
+			spi {
+				ralink,group = "spi";
+				ralink,function = "spi";
+			};
+		};
+		uart0_pins: uartlite {
+			uart {
+				ralink,group = "uart0";
+				ralink,function = "uart";
+			};
+		};
+	};
+
+	rstctrl: rstctrl {
+		compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
+	usbphy {
+		compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
+
+		resets = <&rstctrl 22>;
+		reset-names = "host";
+	};
+
+	ehci@101c0000 {
+		compatible = "ralink,rt3xxx-ehci";
+		reg = <0x101c0000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	ohci@101c1000 {
+		compatible = "ralink,rt3xxx-ohci";
+		reg = <0x101c1000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+};
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7628an_eval.dts
@@ -0,0 +1,54 @@
+/dts-v1/;
+
+/include/ "mt7628an.dtsi"
+
+/ {
+	compatible = "ralink,mt7628an-eval-board", "ralink,mt7628an-soc";
+	model = "Ralink MT7628AN evaluation board";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600 init=/init";
+	};
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "en25q64";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "en25q64";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+};