You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-p...

79 lines
2.6 KiB

mvebu: new subtarget cortex A53 This commit introduces new subtarget for Marvell EBU Armada Cortex A53 processor based devices. The first device is Globalscale ESPRESSObin. Some hardware specs: SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz RAM: 512MB, 1GB or 2GB DDR3 Storage: SATA interface µSD card slot with footprint for an optional 4GB EMMC 4MB SPI NOR flash for bootloader Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports Connectors: USB 3.0 USB 2.0 µUSB port connected to PL2303SA (USB to serial bridge controller) for UART access Expansion: 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, SPI, MMC, etc MiniPCIe slot Misc: Reset button, JTAG interface Currently booting only from µSD card is supported. The boards depending on date of dispatch can come with various U-Boot versions. For the newest version 2017.03-armada-17.10 no manual intervention should be needed to boot OpenWrt image. For the older ones it's necessary to modify default U-Boot environment: 1. Interrupt boot process to run U-Boot command line, 2. Run following commands: (for version 2017.03-armada-17.06 and 2017.03-armada-17.08) setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000" saveenv (for version 2015.01-armada-17.02 and 2015.01-armada-17.04) setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait" setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}" saveenv 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
7 years ago
From adf4e289dd7f801c3fe12e0e6b491e11e548cd3d Mon Sep 17 00:00:00 2001
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Thu, 30 Nov 2017 14:40:27 +0100
Subject: clk: mvebu: armada-37xx-periph: cosmetic changes
This patches fixes few cosmetic issues such as alignment, blank lines
and required space.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/mvebu/armada-37xx-periph.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -79,6 +79,7 @@ static const struct clk_div_table clk_ta
{ .val = 1, .div = 4, },
{ .val = 0, .div = 0, }, /* last entry */
};
+
static const struct clk_ops clk_double_div_ops;
#define PERIPH_GATE(_name, _bit) \
@@ -217,7 +218,7 @@ PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL
PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
-static struct clk_periph_data data_nb[] ={
+static struct clk_periph_data data_nb[] = {
REF_CLK_FULL_DD(mmc),
REF_CLK_FULL_DD(sata_host),
REF_CLK_FULL_DD(sec_at),
@@ -281,7 +282,7 @@ static unsigned int get_div(void __iomem
}
static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+ unsigned long parent_rate)
{
struct clk_double_div *double_div = to_clk_double_div(hw);
unsigned int div;
@@ -303,6 +304,7 @@ static const struct of_device_id armada_
.data = data_sb, },
{ }
};
+
static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
void __iomem *reg, spinlock_t *lock,
struct device *dev, struct clk_hw **hw)
@@ -355,9 +357,9 @@ static int armada_3700_add_composite_clk
}
*hw = clk_hw_register_composite(dev, data->name, data->parent_names,
- data->num_parents, mux_hw,
- mux_ops, rate_hw, rate_ops,
- gate_hw, gate_ops, CLK_IGNORE_UNUSED);
+ data->num_parents, mux_hw,
+ mux_ops, rate_hw, rate_ops,
+ gate_hw, gate_ops, CLK_IGNORE_UNUSED);
if (IS_ERR(*hw))
return PTR_ERR(*hw);
@@ -406,12 +408,11 @@ static int armada_3700_periph_clock_prob
if (armada_3700_add_composite_clk(&data[i], reg,
&driver_data->lock, dev, hw))
dev_err(dev, "Can't register periph clock %s\n",
- data[i].name);
-
+ data[i].name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
- driver_data->hw_data);
+ driver_data->hw_data);
if (ret) {
for (i = 0; i < num_periph; i++)
clk_hw_unregister(driver_data->hw_data->hws[i]);