You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0450-ASoC-add-driver-fo...

506 lines
15 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 09a4e02366e56076b344dd1fa14eea7618a11d5a Mon Sep 17 00:00:00 2001
From: dev-3Dlab <45081440+dev-3Dlab@users.noreply.github.com>
Date: Wed, 5 Dec 2018 10:59:11 +0100
Subject: [PATCH 450/454] ASoC: add driver for 3Dlab Nano soundcard (#2758)
Signed-off-by: GT <dev@3d-lab-av.com>
---
.../overlays/3dlab-nano-player-overlay.dts | 32 ++
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 6 +
arch/arm/configs/bcm2709_defconfig | 1 +
arch/arm/configs/bcmrpi_defconfig | 1 +
sound/soc/bcm/3dlab-nano-player.c | 370 ++++++++++++++++++
sound/soc/bcm/Kconfig | 6 +
sound/soc/bcm/Makefile | 2 +
8 files changed, 419 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts
create mode 100644 sound/soc/bcm/3dlab-nano-player.c
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts
@@ -0,0 +1,32 @@
+// Definitions for 3Dlab Nano Player
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "brcm,bcm2708";
+
+ fragment@0 {
+ target = <&i2s>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@1 {
+ target = <&i2c>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nano-player@41 {
+ compatible = "3dlab,nano-player";
+ reg = <0x41>;
+ i2s-controller = <&i2s>;
+ status = "okay";
+ };
+ };
+ };
+};
+
+// EOF
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -1,6 +1,7 @@
# Overlays for the Raspberry Pi platform
dtbo-$(CONFIG_ARCH_BCM2835) += \
+ 3dlab-nano-player.dtbo \
adau1977-adc.dtbo \
adau7002-simple.dtbo \
ads1015.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -199,6 +199,12 @@ Params:
and the other i2c baudrate parameters.
+Name: 3dlab-nano-player
+Info: Configures the 3Dlab Nano Player
+Load: dtoverlay=3dlab-nano-player
+Params: <None>
+
+
Name: adau1977-adc
Info: Overlay for activation of ADAU1977 ADC codec over I2C for control
and I2S for data.
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -889,6 +889,7 @@ CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_SOC=m
CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER=m
CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD=m
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -882,6 +882,7 @@ CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_SOC=m
CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER=m
CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD=m
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC=m
CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS=m
--- /dev/null
+++ b/sound/soc/bcm/3dlab-nano-player.c
@@ -0,0 +1,370 @@
+/*
+ * 3Dlab Nano Player ALSA SoC Audio driver.
+ *
+ * Copyright (C) 2018 3Dlab.
+ *
+ * Author: GT <dev@3d-lab-av.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+
+#define NANO_ID 0x00
+#define NANO_VER 0x01
+#define NANO_CFG 0x02
+#define NANO_STATUS 0x03
+#define NANO_SPI_ADDR 0x04
+#define NANO_SPI_DATA 0x05
+
+#define NANO_ID_VAL 0x3D
+#define NANO_CFG_OFF 0x00
+#define NANO_CFG_MULT1 0
+#define NANO_CFG_MULT2 1
+#define NANO_CFG_MULT4 2
+#define NANO_CFG_MULT8 3
+#define NANO_CFG_MULT16 4
+#define NANO_CFG_CLK22 0
+#define NANO_CFG_CLK24 BIT(3)
+#define NANO_CFG_DSD BIT(4)
+#define NANO_CFG_ENA BIT(5)
+#define NANO_CFG_BLINK BIT(6)
+#define NANO_STATUS_P1 BIT(0)
+#define NANO_STATUS_P2 BIT(1)
+#define NANO_STATUS_FLG BIT(2)
+#define NANO_STATUS_CLK BIT(3)
+#define NANO_SPI_READ 0
+#define NANO_SPI_WRITE BIT(5)
+
+#define NANO_DAC_CTRL1 0x00
+#define NANO_DAC_CTRL2 0x01
+#define NANO_DAC_CTRL3 0x02
+#define NANO_DAC_LATT 0x03
+#define NANO_DAC_RATT 0x04
+
+#define NANO_CTRL2_VAL 0x22
+
+static int nano_player_spi_write(struct regmap *map,
+ unsigned int reg, unsigned int val)
+{
+ /* indirect register access */
+ regmap_write(map, NANO_SPI_DATA, val);
+ regmap_write(map, NANO_SPI_ADDR, reg | NANO_SPI_WRITE);
+ return 0;
+}
+
+static int nano_player_ctrl_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ /* describe control element */
+ if (strstr(kcontrol->id.name, "Volume")) {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 100;
+ } else {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ }
+
+ return 0;
+}
+
+static int nano_player_ctrl_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ /* program control value to hardware */
+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
+ struct regmap *regmap = snd_soc_card_get_drvdata(card);
+
+ if (strstr(kcontrol->id.name, "Volume")) {
+ unsigned int vol = ucontrol->value.integer.value[0];
+ unsigned int att = 255 - (2 * (100 - vol));
+
+ nano_player_spi_write(regmap, NANO_DAC_LATT, att);
+ nano_player_spi_write(regmap, NANO_DAC_RATT, att);
+ kcontrol->private_value = vol;
+ } else {
+ unsigned int mute = ucontrol->value.integer.value[0];
+ unsigned int reg = NANO_CTRL2_VAL | mute;
+
+ nano_player_spi_write(regmap, NANO_DAC_CTRL2, reg);
+ kcontrol->private_value = mute;
+ }
+ return 0;
+}
+
+static int nano_player_ctrl_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ /* return last programmed value */
+ ucontrol->value.integer.value[0] = kcontrol->private_value;
+ return 0;
+}
+
+#define SOC_NANO_PLAYER_CTRL(xname) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .info = nano_player_ctrl_info, \
+ .put = nano_player_ctrl_put, \
+ .get = nano_player_ctrl_get }
+
+static const struct snd_kcontrol_new nano_player_controls[] = {
+ SOC_NANO_PLAYER_CTRL("Master Playback Volume"),
+ SOC_NANO_PLAYER_CTRL("Master Playback Switch"),
+};
+
+static const unsigned int nano_player_rates[] = {
+ 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000,
+ 705600, 768000 /* only possible with fast clocks */
+};
+
+static struct snd_pcm_hw_constraint_list nano_player_constraint_rates = {
+ .list = nano_player_rates,
+ .count = ARRAY_SIZE(nano_player_rates),
+};
+
+static int nano_player_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ struct regmap *regmap = snd_soc_card_get_drvdata(card);
+ struct snd_soc_pcm_stream *cpu = &rtd->cpu_dai->driver->playback;
+ struct snd_soc_pcm_stream *codec = &rtd->codec_dai->driver->playback;
+ unsigned int sample_bits = 32;
+ unsigned int val;
+
+ /* configure cpu dai */
+ cpu->formats |= SNDRV_PCM_FMTBIT_DSD_U32_LE;
+ cpu->rate_max = 768000;
+
+ /* configure dummy codec dai */
+ codec->rate_min = 44100;
+ codec->rates = SNDRV_PCM_RATE_KNOT;
+ codec->formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_DSD_U32_LE;
+
+ /* configure max supported rate */
+ regmap_read(regmap, NANO_STATUS, &val);
+ if (val & NANO_STATUS_CLK) {
+ dev_notice(card->dev, "Board with fast clocks installed\n");
+ codec->rate_max = 768000;
+ } else {
+ dev_notice(card->dev, "Board with normal clocks installed\n");
+ codec->rate_max = 384000;
+ }
+
+ /* frame length enforced by hardware */
+ return snd_soc_dai_set_bclk_ratio(rtd->cpu_dai, sample_bits * 2);
+}
+
+static int nano_player_startup(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &nano_player_constraint_rates);
+}
+
+static int nano_player_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct regmap *regmap = snd_soc_card_get_drvdata(card);
+ unsigned int config = NANO_CFG_ENA;
+ struct snd_mask *fmt;
+
+ /* configure PCM or DSD */
+ fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+ if (snd_mask_test(fmt, SNDRV_PCM_FORMAT_DSD_U32_LE)) {
+ /* embed DSD in PCM data */
+ snd_mask_none(fmt);
+ snd_mask_set(fmt, SNDRV_PCM_FORMAT_S32_LE);
+ /* enable DSD mode */
+ config |= NANO_CFG_DSD;
+ }
+
+ /* configure clocks */
+ switch (params_rate(params)) {
+ case 44100:
+ config |= NANO_CFG_MULT1 | NANO_CFG_CLK22;
+ break;
+ case 88200:
+ config |= NANO_CFG_MULT2 | NANO_CFG_CLK22;
+ break;
+ case 176400:
+ config |= NANO_CFG_MULT4 | NANO_CFG_CLK22;
+ break;
+ case 352800:
+ config |= NANO_CFG_MULT8 | NANO_CFG_CLK22;
+ break;
+ case 705600:
+ config |= NANO_CFG_MULT16 | NANO_CFG_CLK22;
+ break;
+ case 48000:
+ config |= NANO_CFG_MULT1 | NANO_CFG_CLK24;
+ break;
+ case 96000:
+ config |= NANO_CFG_MULT2 | NANO_CFG_CLK24;
+ break;
+ case 192000:
+ config |= NANO_CFG_MULT4 | NANO_CFG_CLK24;
+ break;
+ case 384000:
+ config |= NANO_CFG_MULT8 | NANO_CFG_CLK24;
+ break;
+ case 768000:
+ config |= NANO_CFG_MULT16 | NANO_CFG_CLK24;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(card->dev, "Send CFG register 0x%02X\n", config);
+ return regmap_write(regmap, NANO_CFG, config);
+}
+
+static struct snd_soc_ops nano_player_ops = {
+ .startup = nano_player_startup,
+ .hw_params = nano_player_hw_params,
+};
+
+static struct snd_soc_dai_link nano_player_link = {
+ .name = "3Dlab Nano Player",
+ .stream_name = "3Dlab Nano Player HiFi",
+ .platform_name = "bcm2708-i2s.0",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_name = "snd-soc-dummy",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .dai_fmt = SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_CONT |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
+ .init = nano_player_init,
+ .ops = &nano_player_ops,
+};
+
+static const struct regmap_config nano_player_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 128,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int nano_player_card_probe(struct snd_soc_card *card)
+{
+ struct regmap *regmap = snd_soc_card_get_drvdata(card);
+ unsigned int val;
+
+ /* check hardware integrity */
+ regmap_read(regmap, NANO_ID, &val);
+ if (val != NANO_ID_VAL) {
+ dev_err(card->dev, "Invalid ID register 0x%02X\n", val);
+ return -ENODEV;
+ }
+
+ /* report version to the user */
+ regmap_read(regmap, NANO_VER, &val);
+ dev_notice(card->dev, "Started 3Dlab Nano Player driver (v%d)\n", val);
+
+ /* enable internal audio bus and blink status LED */
+ return regmap_write(regmap, NANO_CFG, NANO_CFG_ENA | NANO_CFG_BLINK);
+}
+
+static int nano_player_card_remove(struct snd_soc_card *card)
+{
+ /* disable internal audio bus */
+ struct regmap *regmap = snd_soc_card_get_drvdata(card);
+
+ return regmap_write(regmap, NANO_CFG, NANO_CFG_OFF);
+}
+
+static struct snd_soc_card nano_player_card = {
+ .name = "3Dlab_Nano_Player",
+ .owner = THIS_MODULE,
+ .dai_link = &nano_player_link,
+ .num_links = 1,
+ .controls = nano_player_controls,
+ .num_controls = ARRAY_SIZE(nano_player_controls),
+ .probe = nano_player_card_probe,
+ .remove = nano_player_card_remove,
+};
+
+static int nano_player_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(i2c, &nano_player_regmap);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&i2c->dev, "Failed to init regmap %d\n", ret);
+ return ret;
+ }
+
+ if (i2c->dev.of_node) {
+ struct snd_soc_dai_link *dai = &nano_player_link;
+ struct device_node *node;
+
+ /* cpu handle configured by device tree */
+ node = of_parse_phandle(i2c->dev.of_node, "i2s-controller", 0);
+ if (node) {
+ dai->platform_name = NULL;
+ dai->platform_of_node = node;
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = node;
+ }
+ }
+
+ nano_player_card.dev = &i2c->dev;
+ snd_soc_card_set_drvdata(&nano_player_card, regmap);
+ ret = devm_snd_soc_register_card(&i2c->dev, &nano_player_card);
+
+ if (ret && ret != -EPROBE_DEFER)
+ dev_err(&i2c->dev, "Failed to register card %d\n", ret);
+
+ return ret;
+}
+
+static const struct of_device_id nano_player_of_match[] = {
+ { .compatible = "3dlab,nano-player", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, nano_player_of_match);
+
+static const struct i2c_device_id nano_player_i2c_id[] = {
+ { "nano-player", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, nano_player_i2c_id);
+
+static struct i2c_driver nano_player_i2c_driver = {
+ .probe = nano_player_i2c_probe,
+ .id_table = nano_player_i2c_id,
+ .driver = {
+ .name = "nano-player",
+ .owner = THIS_MODULE,
+ .of_match_table = nano_player_of_match,
+ },
+};
+
+module_i2c_driver(nano_player_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC 3Dlab Nano Player driver");
+MODULE_AUTHOR("GT <dev@3d-lab-av.com>");
+MODULE_LICENSE("GPL v2");
+
+/* EOF */
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -18,6 +18,12 @@ config SND_SOC_CYGNUS
If you don't know what to do here, say N.
+config SND_BCM2708_SOC_3DLAB_NANO_PLAYER
+ tristate "Support for 3Dlab Nano Player"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ help
+ Say Y or M if you want to add support for 3Dlab Nano Player.
+
config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD
tristate "Support for Google voiceHAT soundcard"
depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-
snd-soc-googlevoicehat-codec-objs := googlevoicehat-codec.o
# BCM2708 Machine Support
+snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o
snd-soc-adau1977-adc-objs := adau1977-adc.o
snd-soc-googlevoicehat-soundcard-objs := googlevoicehat-soundcard.o
snd-soc-hifiberry-amp-objs := hifiberry_amp.o
@@ -38,6 +39,7 @@ snd-soc-allo-katana-codec-objs := allo-k
snd-soc-pisound-objs := pisound.o
snd-soc-fe-pi-audio-objs := fe-pi-audio.o
+obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o
obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o
obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-soundcard.o
obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o