You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for...

90 lines
2.1 KiB

From e27a09ae9369e10bc589ef4d720ecf4abcbcec50 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Mon, 19 Jan 2015 12:45:37 -0700
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000
Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only
unusual thing in its DTS file is "ubi" partition on NAND flash.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 60 ++++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amar
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
bcm47081-asus-rt-n18u.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,60 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "luxul,xwc-1000", "brcm,bcm4708";
+ model = "Luxul XWC-1000 (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ axi@18000000 {
+ nand@28000 {
+ reg = <0x00028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};