freifunkist-firmware/target/linux/ipq806x/patches/0153-soc-qcom-tcsr-Add-TCSR-driver.patch

From 0b469f3f4c0e6a0e0b1b60a059600e325a03b6f5 Mon Sep 17 00:00:00 2001
From: Andy Gross <agross@codeaurora.org>
Date: Thu, 12 Jun 2014 00:52:06 -0500
Subject: [PATCH 153/182] soc: qcom: tcsr: Add TCSR driver

This patch adds support for the TCSR IP block present in Qualcomm processors.

Signed-off-by: Andy Gross <agross@codeaurora.org>
---
 .../devicetree/bindings/soc/qcom/qcom,tcsr.txt     |   25 ++++++++
 drivers/soc/qcom/Kconfig                           |    6 ++
 drivers/soc/qcom/Makefile                          |    1 +
 drivers/soc/qcom/qcom_tcsr.c                       |   64 ++++++++++++++++++++
 include/dt-bindings/soc/qcom,tcsr.h                |   19 ++++++
 5 files changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr.txt
 create mode 100644 drivers/soc/qcom/qcom_tcsr.c
 create mode 100644 include/dt-bindings/soc/qcom,tcsr.h

--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr.txt
@@ -0,0 +1,25 @@
+QCOM TCSR (Top Control and Status Register) Driver
+
+The TCSR provides miscellaneous control functions and status registers for
+Qualcomm processors.
+
+Required properties:
+- compatible: must contain "qcom,tcsr" for IPQ806x
+- reg: Address range for TCSR registers
+
+Optional properties:
+- qcom,usb-ctrl-select : indicates USB port type selection.  Please reference
+  dt-bindings/soc/qcom,tcsr.h for valid USB port selection values.
+
+Example for IPQ8064:
+
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+		tcsr: tcsr@1a400000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1a400000 0x100>;
+
+			qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+		};
+
+
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -9,3 +9,9 @@ config QCOM_GSBI
           functions for connecting the underlying serial UART, SPI, and I2C
           devices to the output pins.
 
+config QCOM_TCSR
+        tristate "QCOM Top Control and Status Registers"
+        depends on ARCH_QCOM
+        help
+          Say y here to enable TCSR support.  The TCSR provides control
+          functions for various peripherals.
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
+obj-$(CONFIG_QCOM_TCSR)	+=	qcom_tcsr.o
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License rev 2 and
+ * only rev 2 as published by the free Software foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define TCSR_USB_PORT_SEL	0xb0
+
+static int tcsr_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	const struct device_node *node = pdev->dev.of_node;
+	void __iomem *base;
+	u32 val;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
+		dev_err(&pdev->dev, "setting usb port select = %d\n", val);
+		writel(val, base + TCSR_USB_PORT_SEL);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id tcsr_dt_match[] = {
+	{ .compatible = "qcom,tcsr", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
+
+static struct platform_driver tcsr_driver = {
+	.driver = {
+		.name		= "tcsr",
+		.owner		= THIS_MODULE,
+		.of_match_table	= tcsr_dt_match,
+	},
+	.probe = tcsr_probe,
+};
+
+module_platform_driver(tcsr_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,tcsr.h
@@ -0,0 +1,19 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_TCSR_H
+#define __DT_BINDINGS_QCOM_TCSR_H
+
+#define TCSR_USB_SELECT_USB3_P0		0x1
+#define TCSR_USB_SELECT_USB3_P1		0x2
+#define TCSR_USB_SELECT_USB3_DUAL	0x3
+
+#endif