You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0247-added-capture_clea...

48 lines
1.7 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 61ad2796b48891e5a3e52d290cb51a44259b5799 Mon Sep 17 00:00:00 2001
From: hdoverobinson <hdoverobinson@gmail.com>
Date: Tue, 13 Mar 2018 06:58:39 -0400
Subject: [PATCH 247/454] added capture_clear option to pps-gpio via dtoverlay
(#2433)
---
arch/arm/boot/dts/overlays/README | 5 ++++-
arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 1 +
drivers/pps/clients/pps-gpio.c | 3 +++
3 files changed, 8 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1287,7 +1287,10 @@ Info: Configures the pps-gpio (pulse-p
Load: dtoverlay=pps-gpio,<param>=<val>
Params: gpiopin Input GPIO (default "18")
assert_falling_edge When present, assert is indicated by a falling
- edge, rather than by a rising edge
+ edge, rather than by a rising edge (default
+ off)
+ capture_clear Generate clear events on the trailing edge
+ (default off)
Name: pwm
--- a/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts
+++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts
@@ -33,5 +33,6 @@
<&pps_pins>,"brcm,pins:0",
<&pps_pins>,"reg:0";
assert_falling_edge = <&pps>,"assert-falling-edge?";
+ capture_clear = <&pps>,"capture-clear?";
};
};
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -119,6 +119,9 @@ static int pps_gpio_probe(struct platfor
if (of_get_property(np, "assert-falling-edge", NULL))
data->assert_falling_edge = true;
+
+ if (of_get_property(np, "capture-clear", NULL))
+ data->capture_clear = true;
}
/* GPIO setup */