You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0206-overlays-Allow-mul...

78 lines
2.9 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 00267dfa96c9ac658c0bf7be980f2b72ba774921 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 15 Feb 2018 09:36:52 +0000
Subject: [PATCH 206/454] overlays: Allow multiple instances of gpio-ir[-tx]
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/overlays/gpio-ir-overlay.dts | 10 ++++++----
arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts | 10 ++++++----
2 files changed, 12 insertions(+), 8 deletions(-)
--- a/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts
+++ b/arch/arm/boot/dts/overlays/gpio-ir-overlay.dts
@@ -8,7 +8,7 @@
fragment@0 {
target-path = "/";
__overlay__ {
- gpio_ir: ir-receiver {
+ gpio_ir: ir-receiver@12 {
compatible = "gpio-ir-receiver";
// pin number, high or low
@@ -25,7 +25,7 @@
fragment@1 {
target = <&gpio>;
__overlay__ {
- gpio_ir_pins: gpio_ir_pins {
+ gpio_ir_pins: gpio_ir_pins@12 {
brcm,pins = <18>; // pin 18
brcm,function = <0>; // in
brcm,pull = <1>; // down
@@ -35,8 +35,10 @@
__overrides__ {
// parameters
- gpio_pin = <&gpio_ir>,"gpios:4",
- <&gpio_ir_pins>,"brcm,pins:0"; // pin number
+ gpio_pin = <&gpio_ir>,"gpios:4", // pin number
+ <&gpio_ir>,"reg:0",
+ <&gpio_ir_pins>,"brcm,pins:0",
+ <&gpio_ir_pins>,"reg:0";
gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state
rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map
--- a/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts
+++ b/arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts
@@ -7,7 +7,7 @@
fragment@0 {
target = <&gpio>;
__overlay__ {
- gpio_ir_tx_pins: gpio_ir_tx_pins {
+ gpio_ir_tx_pins: gpio_ir_tx_pins@12 {
brcm,pins = <18>;
brcm,function = <1>; // out
};
@@ -17,7 +17,7 @@
fragment@1 {
target-path = "/";
__overlay__ {
- gpio_ir_tx: gpio-ir-transmitter {
+ gpio_ir_tx: gpio-ir-transmitter@12 {
compatible = "gpio-ir-tx";
pinctrl-names = "default";
pinctrl-0 = <&gpio_ir_tx_pins>;
@@ -27,8 +27,10 @@
};
__overrides__ {
- gpio_pin = <&gpio_ir_tx>, "gpios:4",
- <&gpio_ir_tx_pins>, "brcm,pins:0"; // pin number
+ gpio_pin = <&gpio_ir_tx>, "gpios:4", // pin number
+ <&gpio_ir_tx>, "reg:0",
+ <&gpio_ir_tx_pins>, "brcm,pins:0",
+ <&gpio_ir_tx_pins>, "reg:0";
invert = <&gpio_ir_tx>, "gpios:8"; // 1 = active low
};
};