You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0162-Input-add-I2C-atta...

321 lines
8.8 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 99aaee7d1fde86bd2119d84e90435d89d6d3af07 Mon Sep 17 00:00:00 2001
From: Ahmet Inan <inan@distec.de>
Date: Sat, 14 Oct 2017 10:10:53 -0700
Subject: [PATCH 162/454] Input: add I2C attached EETI EXC3000 multi touch
driver
commit 7e577a17f2eefeef32f1106ebf91e7cd143ba654 upstream.
beware: code adapted to use the old timer API.
The 3000 series have a new protocol which allows to report up to 5 points
in a single 66 byte frame. One must always read in 66 byte frames.
To support up to 10 points, two consecutive frames need to be read:
The first frame says how many points until sync.
The second frame must say zero points or both frames must be discarded.
To be able to work with the higher 400KHz I2C bus rate, one must
successfully send a special package prior _each_ read or the controller
will refuse to cooperate.
This is a minimal implementation based on egalax_i2c.c (which can be found
on the internet) and egalax_ts.c but without the vendor interface and no
power management support.
Signed-off-by: Ahmet Inan <inan@distec.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
.../bindings/input/touchscreen/exc3000.txt | 27 +++
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/exc3000.c | 223 ++++++++++++++++++
4 files changed, 261 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
create mode 100644 drivers/input/touchscreen/exc3000.c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
@@ -0,0 +1,27 @@
+* EETI EXC3000 Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,exc3000"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- touchscreen-size-x: See touchscreen.txt
+- touchscreen-size-y: See touchscreen.txt
+
+Optional properties:
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
+- touchscreen-swapped-x-y: See touchscreen.txt
+
+Example:
+
+ touchscreen@2a {
+ compatible = "eeti,exc3000";
+ reg = <0x2a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -316,6 +316,16 @@ config TOUCHSCREEN_EGALAX_SERIAL
To compile this driver as a module, choose M here: the
module will be called egalax_ts_serial.
+config TOUCHSCREEN_EXC3000
+ tristate "EETI EXC3000 multi-touch panel support"
+ depends on I2C
+ help
+ Say Y here to enable support for I2C connected EETI
+ EXC3000 multi-touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called exc3000.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_TOUCHSCREEN_ELAN) += elant
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
+obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
--- /dev/null
+++ b/drivers/input/touchscreen/exc3000.c
@@ -0,0 +1,223 @@
+/*
+ * Driver for I2C connected EETI EXC3000 multiple touch controller
+ *
+ * Copyright (C) 2017 Ahmet Inan <inan@distec.de>
+ *
+ * minimal implementation based on egalax_ts.c and egalax_i2c.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/timer.h>
+#include <asm/unaligned.h>
+
+#define EXC3000_NUM_SLOTS 10
+#define EXC3000_SLOTS_PER_FRAME 5
+#define EXC3000_LEN_FRAME 66
+#define EXC3000_LEN_POINT 10
+#define EXC3000_MT_EVENT 6
+#define EXC3000_TIMEOUT_MS 100
+
+struct exc3000_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct touchscreen_properties prop;
+ struct timer_list timer;
+ u8 buf[2 * EXC3000_LEN_FRAME];
+};
+
+static void exc3000_report_slots(struct input_dev *input,
+ struct touchscreen_properties *prop,
+ const u8 *buf, int num)
+{
+ for (; num--; buf += EXC3000_LEN_POINT) {
+ if (buf[0] & BIT(0)) {
+ input_mt_slot(input, buf[1]);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(input, prop,
+ get_unaligned_le16(buf + 2),
+ get_unaligned_le16(buf + 4),
+ true);
+ }
+ }
+}
+
+static void exc3000_timer(unsigned long d)
+{
+ struct exc3000_data *data = (void *)d;
+
+ input_mt_sync_frame(data->input);
+ input_sync(data->input);
+}
+
+static int exc3000_read_frame(struct i2c_client *client, u8 *buf)
+{
+ int ret;
+
+ ret = i2c_master_send(client, "'", 2);
+ if (ret < 0)
+ return ret;
+
+ if (ret != 2)
+ return -EIO;
+
+ ret = i2c_master_recv(client, buf, EXC3000_LEN_FRAME);
+ if (ret < 0)
+ return ret;
+
+ if (ret != EXC3000_LEN_FRAME)
+ return -EIO;
+
+ if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME ||
+ buf[2] != EXC3000_MT_EVENT)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int exc3000_read_data(struct i2c_client *client,
+ u8 *buf, int *n_slots)
+{
+ int error;
+
+ error = exc3000_read_frame(client, buf);
+ if (error)
+ return error;
+
+ *n_slots = buf[3];
+ if (!*n_slots || *n_slots > EXC3000_NUM_SLOTS)
+ return -EINVAL;
+
+ if (*n_slots > EXC3000_SLOTS_PER_FRAME) {
+ /* Read 2nd frame to get the rest of the contacts. */
+ error = exc3000_read_frame(client, buf + EXC3000_LEN_FRAME);
+ if (error)
+ return error;
+
+ /* 2nd chunk must have number of contacts set to 0. */
+ if (buf[EXC3000_LEN_FRAME + 3] != 0)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
+{
+ struct exc3000_data *data = dev_id;
+ struct input_dev *input = data->input;
+ u8 *buf = data->buf;
+ int slots, total_slots;
+ int error;
+
+ error = exc3000_read_data(data->client, buf, &total_slots);
+ if (error) {
+ /* Schedule a timer to release "stuck" contacts */
+ mod_timer(&data->timer,
+ jiffies + msecs_to_jiffies(EXC3000_TIMEOUT_MS));
+ goto out;
+ }
+
+ /*
+ * We read full state successfully, no contacts will be "stuck".
+ */
+ del_timer_sync(&data->timer);
+
+ while (total_slots > 0) {
+ slots = min(total_slots, EXC3000_SLOTS_PER_FRAME);
+ exc3000_report_slots(input, &data->prop, buf + 4, slots);
+ total_slots -= slots;
+ buf += EXC3000_LEN_FRAME;
+ }
+
+ input_mt_sync_frame(input);
+ input_sync(input);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int exc3000_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct exc3000_data *data;
+ struct input_dev *input;
+ int error;
+
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ setup_timer(&data->timer, exc3000_timer, (unsigned long)data);
+
+ input = devm_input_allocate_device(&client->dev);
+ if (!input)
+ return -ENOMEM;
+
+ data->input = input;
+
+ input->name = "EETI EXC3000 Touch Screen";
+ input->id.bustype = BUS_I2C;
+
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, 4095, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
+ touchscreen_parse_properties(input, true, &data->prop);
+
+ error = input_mt_init_slots(input, EXC3000_NUM_SLOTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error)
+ return error;
+
+ error = input_register_device(input);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, exc3000_interrupt, IRQF_ONESHOT,
+ client->name, data);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static const struct i2c_device_id exc3000_id[] = {
+ { "exc3000", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, exc3000_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id exc3000_of_match[] = {
+ { .compatible = "eeti,exc3000" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, exc3000_of_match);
+#endif
+
+static struct i2c_driver exc3000_driver = {
+ .driver = {
+ .name = "exc3000",
+ .of_match_table = of_match_ptr(exc3000_of_match),
+ },
+ .id_table = exc3000_id,
+ .probe = exc3000_probe,
+};
+
+module_i2c_driver(exc3000_driver);
+
+MODULE_AUTHOR("Ahmet Inan <inan@distec.de>");
+MODULE_DESCRIPTION("I2C connected EETI EXC3000 multiple touch controller driver");
+MODULE_LICENSE("GPL v2");