You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
191 lines
5.3 KiB
191 lines
5.3 KiB
![]()
6 years ago
|
From 15aa7a1d49c20f7f41b5c69cea2f46e1e976e660 Mon Sep 17 00:00:00 2001
|
||
|
From: Aaron Shaw <shawaj@gmail.com>
|
||
|
Date: Sun, 24 Dec 2017 21:57:05 +0000
|
||
|
Subject: [PATCH 143/454] overlays: Add media center HAT overlay (#2313)
|
||
|
|
||
|
---
|
||
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
||
|
arch/arm/boot/dts/overlays/README | 24 ++++
|
||
|
.../dts/overlays/media-center-overlay.dts | 132 ++++++++++++++++++
|
||
|
3 files changed, 157 insertions(+)
|
||
|
create mode 100644 arch/arm/boot/dts/overlays/media-center-overlay.dts
|
||
|
|
||
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
||
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
||
|
@@ -61,6 +61,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
||
|
mcp2515-can0.dtbo \
|
||
|
mcp2515-can1.dtbo \
|
||
|
mcp3008.dtbo \
|
||
|
+ media-center.dtbo \
|
||
|
midi-uart0.dtbo \
|
||
|
midi-uart1.dtbo \
|
||
|
mmc.dtbo \
|
||
|
--- a/arch/arm/boot/dts/overlays/README
|
||
|
+++ b/arch/arm/boot/dts/overlays/README
|
||
|
@@ -994,6 +994,30 @@ Params: spi<n>-<m>-present boolean,
|
||
|
spi<n>-<m>-speed integer, set the spi bus speed for this device
|
||
|
|
||
|
|
||
|
+Name: media-center
|
||
|
+Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply
|
||
|
+Load: dtoverlay=media-center,<param>=<val>
|
||
|
+Params: speed Display SPI bus speed
|
||
|
+ rotate Display rotation {0,90,180,270}
|
||
|
+ fps Delay between frame updates
|
||
|
+ xohms Touchpanel sensitivity (X-plate resistance)
|
||
|
+ swapxy Swap x and y axis
|
||
|
+ gpio_out_pin GPIO for output (default "17")
|
||
|
+ gpio_in_pin GPIO for input (default "18")
|
||
|
+ gpio_in_pull Pull up/down/off on the input pin
|
||
|
+ (default "down")
|
||
|
+ sense Override the IR receive auto-detection logic:
|
||
|
+ "0" = force active-high
|
||
|
+ "1" = force active-low
|
||
|
+ "-1" = use auto-detection
|
||
|
+ (default "-1")
|
||
|
+ softcarrier Turn the software carrier "on" or "off"
|
||
|
+ (default "on")
|
||
|
+ invert "on" = invert the output pin (default "off")
|
||
|
+ debug "on" = enable additional debug messages
|
||
|
+ (default "off")
|
||
|
+
|
||
|
+
|
||
|
Name: midi-uart0
|
||
|
Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets
|
||
|
31.25kbaud, the frequency required for MIDI
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts
|
||
|
@@ -0,0 +1,132 @@
|
||
|
+/*
|
||
|
+ * Device Tree overlay for Media Center HAT by Pi Supply
|
||
|
+ *
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+/plugin/;
|
||
|
+
|
||
|
+/ {
|
||
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
||
|
+
|
||
|
+ fragment@0 {
|
||
|
+ target = <&spi0>;
|
||
|
+ __overlay__ {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ spidev@0{
|
||
|
+ status = "disabled";
|
||
|
+ };
|
||
|
+
|
||
|
+ spidev@1{
|
||
|
+ status = "disabled";
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ fragment@1 {
|
||
|
+ target = <&gpio>;
|
||
|
+ __overlay__ {
|
||
|
+ rpi_display_pins: rpi_display_pins {
|
||
|
+ brcm,pins = <12 23 24 25>;
|
||
|
+ brcm,function = <1 1 1 0>; /* out out out in */
|
||
|
+ brcm,pull = <0 0 0 2>; /* - - - up */
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ fragment@2 {
|
||
|
+ target = <&spi0>;
|
||
|
+ __overlay__ {
|
||
|
+ /* needed to avoid dtc warning */
|
||
|
+ #address-cells = <1>;
|
||
|
+ #size-cells = <0>;
|
||
|
+
|
||
|
+ rpidisplay: rpi-display@0{
|
||
|
+ compatible = "ilitek,ili9341";
|
||
|
+ reg = <0>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&rpi_display_pins>;
|
||
|
+
|
||
|
+ spi-max-frequency = <32000000>;
|
||
|
+ rotate = <90>;
|
||
|
+ bgr;
|
||
|
+ fps = <30>;
|
||
|
+ buswidth = <8>;
|
||
|
+ reset-gpios = <&gpio 23 0>;
|
||
|
+ dc-gpios = <&gpio 24 0>;
|
||
|
+ led-gpios = <&gpio 12 1>;
|
||
|
+ debug = <0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ rpidisplay_ts: rpi-display-ts@1 {
|
||
|
+ compatible = "ti,ads7846";
|
||
|
+ reg = <1>;
|
||
|
+
|
||
|
+ spi-max-frequency = <2000000>;
|
||
|
+ interrupts = <25 2>; /* high-to-low edge triggered */
|
||
|
+ interrupt-parent = <&gpio>;
|
||
|
+ pendown-gpio = <&gpio 25 0>;
|
||
|
+ ti,x-plate-ohms = /bits/ 16 <60>;
|
||
|
+ ti,pressure-max = /bits/ 16 <255>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ fragment@3 {
|
||
|
+ target-path = "/";
|
||
|
+ __overlay__ {
|
||
|
+ lirc_rpi: lirc_rpi {
|
||
|
+ compatible = "rpi,lirc-rpi";
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&lirc_pins>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ // Override autodetection of IR receiver circuit
|
||
|
+ // (0 = active high, 1 = active low, -1 = no override )
|
||
|
+ rpi,sense = <0xffffffff>;
|
||
|
+
|
||
|
+ // Software carrier
|
||
|
+ // (0 = off, 1 = on)
|
||
|
+ rpi,softcarrier = <1>;
|
||
|
+
|
||
|
+ // Invert output
|
||
|
+ // (0 = off, 1 = on)
|
||
|
+ rpi,invert = <0>;
|
||
|
+
|
||
|
+ // Enable debugging messages
|
||
|
+ // (0 = off, 1 = on)
|
||
|
+ rpi,debug = <0>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ fragment@4 {
|
||
|
+ target = <&gpio>;
|
||
|
+ __overlay__ {
|
||
|
+ lirc_pins: lirc_pins {
|
||
|
+ brcm,pins = <6 5>;
|
||
|
+ brcm,function = <1 0>; // out in
|
||
|
+ brcm,pull = <0 1>; // off down
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ __overrides__ {
|
||
|
+ speed = <&rpidisplay>,"spi-max-frequency:0";
|
||
|
+ rotate = <&rpidisplay>,"rotate:0";
|
||
|
+ fps = <&rpidisplay>,"fps:0";
|
||
|
+ debug = <&rpidisplay>,"debug:0",
|
||
|
+ <&lirc_rpi>,"rpi,debug:0";
|
||
|
+ xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0";
|
||
|
+ swapxy = <&rpidisplay_ts>,"ti,swap-xy?";
|
||
|
+
|
||
|
+ gpio_out_pin = <&lirc_pins>,"brcm,pins:0";
|
||
|
+ gpio_in_pin = <&lirc_pins>,"brcm,pins:4";
|
||
|
+ gpio_in_pull = <&lirc_pins>,"brcm,pull:4";
|
||
|
+
|
||
|
+ sense = <&lirc_rpi>,"rpi,sense:0";
|
||
|
+ softcarrier = <&lirc_rpi>,"rpi,softcarrier:0";
|
||
|
+ invert = <&lirc_rpi>,"rpi,invert:0";
|
||
|
+ };
|
||
|
+};
|