You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0084-sound-Support-for-...

191 lines
6.2 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 9698288ce060841ca673ed296cc931130a566a12 Mon Sep 17 00:00:00 2001
From: Miquel <miquelblauw@hotmail.com>
Date: Fri, 24 Feb 2017 20:51:06 +0100
Subject: [PATCH 084/454] sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT
Signed-off-by: Miquel Blauw <info@dionaudio.nl>
---
sound/soc/bcm/Kconfig | 7 ++
sound/soc/bcm/Makefile | 2 +
sound/soc/bcm/dionaudio_loco-v2.c | 140 ++++++++++++++++++++++++++++++
3 files changed, 149 insertions(+)
create mode 100644 sound/soc/bcm/dionaudio_loco-v2.c
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -134,6 +134,13 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO
help
Say Y or M if you want to add support for Dion Audio LOCO.
+config SND_BCM2708_SOC_DIONAUDIO_LOCO_V2
+ tristate "Support for Dion Audio LOCO-V2 DAC-AMP"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_PCM5122
+ help
+ Say Y or M if you want to add support for Dion Audio LOCO-V2.
+
config SND_BCM2708_SOC_ALLO_PIANO_DAC
tristate "Support for Allo Piano DAC"
depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -25,6 +25,7 @@ snd-soc-raspidac3-objs := raspidac3.o
snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o
snd-soc-dionaudio-loco-objs := dionaudio_loco.o
+snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o
snd-soc-allo-boss-dac-objs := allo-boss-dac.o
snd-soc-allo-piano-dac-objs := allo-piano-dac.o
snd-soc-allo-piano-dac-plus-objs := allo-piano-dac-plus.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3)
obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o
obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o
+obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o
obj-$(CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC) += snd-soc-allo-boss-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS) += snd-soc-allo-piano-dac-plus.o
--- /dev/null
+++ b/sound/soc/bcm/dionaudio_loco-v2.c
@@ -0,0 +1,140 @@
+/*
+ * ASoC Driver for Dion Audio LOCO-V2 DAC-AMP
+ *
+ * Author: Miquel Blauw <info@dionaudio.nl>
+ * Copyright 2017
+ *
+ * Based on the software of the RPi-DAC writen by Florian Meier
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+static bool digital_gain_0db_limit = true;
+
+static int snd_rpi_dionaudio_loco_v2_init(struct snd_soc_pcm_runtime *rtd)
+{
+ if (digital_gain_0db_limit) {
+ int ret;
+ struct snd_soc_card *card = rtd->card;
+
+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
+ }
+
+ return 0;
+}
+
+static int snd_rpi_dionaudio_loco_v2_hw_params(
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ unsigned int sample_bits =
+ snd_pcm_format_physical_width(params_format(params));
+
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_dionaudio_loco_v2_ops = {
+ .hw_params = snd_rpi_dionaudio_loco_v2_hw_params,
+};
+
+static struct snd_soc_dai_link snd_rpi_dionaudio_loco_v2_dai[] = {
+{
+ .name = "DionAudio LOCO-V2",
+ .stream_name = "DionAudio LOCO-V2 DAC-AMP",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "pcm512x-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "pcm512x.1-004d",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ops = &snd_rpi_dionaudio_loco_v2_ops,
+ .init = snd_rpi_dionaudio_loco_v2_init,
+},};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_dionaudio_loco_v2 = {
+ .name = "Dion Audio LOCO-V2",
+ .dai_link = snd_rpi_dionaudio_loco_v2_dai,
+ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_v2_dai),
+};
+
+static int snd_rpi_dionaudio_loco_v2_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ snd_rpi_dionaudio_loco_v2.dev = &pdev->dev;
+
+ if (pdev->dev.of_node) {
+ struct device_node *i2s_node;
+ struct snd_soc_dai_link *dai =
+ &snd_rpi_dionaudio_loco_v2_dai[0];
+
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ }
+
+ digital_gain_0db_limit = !of_property_read_bool(
+ pdev->dev.of_node, "dionaudio,24db_digital_gain");
+ }
+
+ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco_v2);
+ if (ret)
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int snd_rpi_dionaudio_loco_v2_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco_v2);
+}
+
+static const struct of_device_id dionaudio_of_match[] = {
+ { .compatible = "dionaudio,dionaudio-loco-v2", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dionaudio_of_match);
+
+static struct platform_driver snd_rpi_dionaudio_loco_v2_driver = {
+ .driver = {
+ .name = "snd-rpi-dionaudio-loco-v2",
+ .owner = THIS_MODULE,
+ .of_match_table = dionaudio_of_match,
+ },
+ .probe = snd_rpi_dionaudio_loco_v2_probe,
+ .remove = snd_rpi_dionaudio_loco_v2_remove,
+};
+
+module_platform_driver(snd_rpi_dionaudio_loco_v2_driver);
+
+MODULE_AUTHOR("Miquel Blauw <info@dionaudio.nl>");
+MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO-V2");
+MODULE_LICENSE("GPL v2");