You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0079-Allo-Piano-DAC-boa...

203 lines
6.5 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From 661bd422e6881e357a9e267548e446bdff71a797 Mon Sep 17 00:00:00 2001
From: Clive Messer <clive.m.messer@gmail.com>
Date: Mon, 19 Sep 2016 14:01:04 +0100
Subject: [PATCH 079/454] Allo Piano DAC boards: Initial 2 channel (stereo)
support (#1645)
Add initial 2 channel (stereo) support for Allo Piano DAC (2.0/2.1) boards,
using allo-piano-dac-pcm512x-audio overlay and allo-piano-dac ALSA ASoC
machine driver.
NB. The initial support is 2 channel (stereo) ONLY!
(The Piano DAC 2.1 will only support 2 channel (stereo) left/right output,
pending an update to the upstream pcm512x codec driver, which will have
to be submitted via upstream. With the initial downstream support,
provided by this patch, the Piano DAC 2.1 subwoofer outputs will
not function.)
Signed-off-by: Baswaraj K <jaikumar@cem-solutions.net>
Signed-off-by: Clive Messer <clive.messer@digitaldreamtime.co.uk>
Tested-by: Clive Messer <clive.messer@digitaldreamtime.co.uk>
---
sound/soc/bcm/Kconfig | 7 ++
sound/soc/bcm/Makefile | 2 +
sound/soc/bcm/allo-piano-dac.c | 144 +++++++++++++++++++++++++++++++++
3 files changed, 153 insertions(+)
create mode 100644 sound/soc/bcm/allo-piano-dac.c
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -124,3 +124,10 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO
select SND_SOC_PCM5102a
help
Say Y or M if you want to add support for Dion Audio LOCO.
+
+config SND_BCM2708_SOC_ALLO_PIANO_DAC
+ tristate "Support for Allo Piano DAC"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_PCM512x_I2C
+ help
+ Say Y or M if you want to add support for Allo Piano DAC.
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -24,6 +24,7 @@ snd-soc-raspidac3-objs := raspidac3.o
snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o
snd-soc-dionaudio-loco-objs := dionaudio_loco.o
+snd-soc-allo-piano-dac-objs := allo-piano-dac.o
obj-$(CONFIG_SND_BCM2708_SOC_ADAU1977_ADC) += snd-soc-adau1977-adc.o
obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
@@ -40,3 +41,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3)
obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o
obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o
+obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o
--- /dev/null
+++ b/sound/soc/bcm/allo-piano-dac.c
@@ -0,0 +1,144 @@
+/*
+ * ALSA ASoC Machine Driver for Allo Piano DAC
+ *
+ * Author: Baswaraj K <jaikumar@cem-solutions.net>
+ * Copyright 2016
+ * based on code by Daniel Matuschek <info@crazy-audio.com>
+ * based on code by Florian Meier <florian.meier@koalo.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+static bool digital_gain_0db_limit = true;
+
+static int snd_allo_piano_dac_init(struct snd_soc_pcm_runtime *rtd)
+{
+ if (digital_gain_0db_limit) {
+ int ret;
+ struct snd_soc_card *card = rtd->card;
+
+ ret = snd_soc_limit_volume(card, "Digital Playback Volume",
+ 207);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set volume limit: %d\n",
+ ret);
+ }
+
+ return 0;
+}
+
+static int snd_allo_piano_dac_hw_params(
+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ unsigned int sample_bits =
+ snd_pcm_format_physical_width(params_format(params));
+
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_allo_piano_dac_ops = {
+ .hw_params = snd_allo_piano_dac_hw_params,
+};
+
+static struct snd_soc_dai_link snd_allo_piano_dac_dai[] = {
+{
+ .name = "Piano DAC",
+ .stream_name = "Piano DAC HiFi",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "pcm512x-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "pcm512x.1-004c",
+ .dai_fmt = SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ops = &snd_allo_piano_dac_ops,
+ .init = snd_allo_piano_dac_init,
+},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_allo_piano_dac = {
+ .name = "PianoDAC",
+ .owner = THIS_MODULE,
+ .dai_link = snd_allo_piano_dac_dai,
+ .num_links = ARRAY_SIZE(snd_allo_piano_dac_dai),
+};
+
+static int snd_allo_piano_dac_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ snd_allo_piano_dac.dev = &pdev->dev;
+
+ if (pdev->dev.of_node) {
+ struct device_node *i2s_node;
+ struct snd_soc_dai_link *dai;
+
+ dai = &snd_allo_piano_dac_dai[0];
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ }
+
+ digital_gain_0db_limit = !of_property_read_bool(
+ pdev->dev.of_node, "allo,24db_digital_gain");
+ }
+
+ ret = snd_soc_register_card(&snd_allo_piano_dac);
+ if (ret && ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "snd_soc_register_card() failed: %d\n", ret);
+
+ return ret;
+}
+
+static int snd_allo_piano_dac_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_allo_piano_dac);
+}
+
+static const struct of_device_id snd_allo_piano_dac_of_match[] = {
+ { .compatible = "allo,piano-dac", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, snd_allo_piano_dac_of_match);
+
+static struct platform_driver snd_allo_piano_dac_driver = {
+ .driver = {
+ .name = "snd-allo-piano-dac",
+ .owner = THIS_MODULE,
+ .of_match_table = snd_allo_piano_dac_of_match,
+ },
+ .probe = snd_allo_piano_dac_probe,
+ .remove = snd_allo_piano_dac_remove,
+};
+
+module_platform_driver(snd_allo_piano_dac_driver);
+
+MODULE_AUTHOR("Baswaraj K <jaikumar@cem-solutions.net>");
+MODULE_DESCRIPTION("ALSA ASoC Machine Driver for Allo Piano DAC");
+MODULE_LICENSE("GPL v2");