You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.9/950-0017-spi-bcm2835-Remove...

89 lines
2.3 KiB

From 21f7f9d8146dd9e5a860198781febf78aafee3d1 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 8 Nov 2016 21:35:38 +0000
Subject: [PATCH] spi-bcm2835: Remove unused code
---
drivers/spi/spi-bcm2835.c | 61 -----------------------------------------------
1 file changed, 61 deletions(-)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -679,17 +679,8 @@ static void bcm2835_spi_set_cs(struct sp
bcm2835_wr(bs, BCM2835_SPI_CS, cs);
}
-static int chip_match_name(struct gpio_chip *chip, void *data)
-{
- return !strcmp(chip->label, data);
-}
-
static int bcm2835_spi_setup(struct spi_device *spi)
{
- int err;
- struct gpio_chip *chip;
- struct device_node *pins;
- u32 pingroup_index;
/*
* sanity checking the native-chipselects
*/
@@ -707,58 +698,6 @@ static int bcm2835_spi_setup(struct spi_
return -EINVAL;
}
-#if 0
- /* now translate native cs to GPIO */
- /* first look for chip select pins in the devices pin groups */
- for (pingroup_index = 0;
- (pins = of_parse_phandle(spi->master->dev.of_node,
- "pinctrl-0",
- pingroup_index)) != 0;
- pingroup_index++) {
- u32 pin;
- u32 pin_index;
- for (pin_index = 0;
- of_property_read_u32_index(pins,
- "brcm,pins",
- pin_index,
- &pin) == 0;
- pin_index++) {
- if (((spi->chip_select == 0) &&
- ((pin == 8) || (pin == 36) || (pin == 46))) ||
- ((spi->chip_select == 1) &&
- ((pin == 7) || (pin == 35)))) {
- spi->cs_gpio = pin;
- break;
- }
- }
- of_node_put(pins);
- }
- /* if that fails, assume GPIOs 7-11 are used */
- if (!gpio_is_valid(spi->cs_gpio) ) {
- /* get the gpio chip for the base */
- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
- if (!chip)
- return 0;
-
- /* and calculate the real CS */
- spi->cs_gpio = chip->base + 8 - spi->chip_select;
- }
-
- /* and set up the "mode" and level */
- dev_info(&spi->dev, "setting up native-CS%i as GPIO %i\n",
- spi->chip_select, spi->cs_gpio);
-
- /* set up GPIO as output and pull to the correct level */
- err = gpio_direction_output(spi->cs_gpio,
- (spi->mode & SPI_CS_HIGH) ? 0 : 1);
- if (err) {
- dev_err(&spi->dev,
- "could not set CS%i gpio %i as output: %i",
- spi->chip_select, spi->cs_gpio, err);
- return err;
- }
-#endif
-
return 0;
}