You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.9/031-v4.10-0010-ARM-bcm2835-...

94 lines
2.6 KiB

From 6b9170887e1b912b657dab4597f8b44ae4dbdf50 Mon Sep 17 00:00:00 2001
From: Stefan Wahren <stefan.wahren@i2se.com>
Date: Wed, 16 Nov 2016 17:52:06 +0000
Subject: [PATCH] ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
There are some differences between the schematics and the official firmware
DTS [1]. So based on these additional information the following has been
changed:
* use consistent "CAM_GPIO1" for camera LED
* use consistent "CAM_GPIO0" for camera shutdown
* add "USB_LIMIT" for USB current limit (0=600mA, 1=1200mA)
[1] - https://github.com/raspberrypi/firmware/blob/master/extra/dt-blob.dts
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 4 ++--
arch/arm/boot/dts/bcm2835-rpi-a.dts | 4 ++--
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 2 +-
arch/arm/boot/dts/bcm2835-rpi-b.dts | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -63,13 +63,13 @@
"SCL0",
"NC", /* GPIO30 */
"NC", /* GPIO31 */
- "NC", /* GPIO32 */
+ "CAM_GPIO1", /* GPIO32 */
"NC", /* GPIO33 */
"NC", /* GPIO34 */
"PWR_LOW_N", /* GPIO35 */
"NC", /* GPIO36 */
"NC", /* GPIO37 */
- "NC", /* GPIO38 */
+ "USB_LIMIT", /* GPIO38 */
"NC", /* GPIO39 */
"PWM0_OUT", /* GPIO40 */
"CAM_GPIO0", /* GPIO41 */
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -29,7 +29,7 @@
"SDA1",
"SCL1",
"GPIO_GCLK",
- "CAM_CLK",
+ "CAM_GPIO1",
"LAN_RUN",
"SPI_CE1_N",
"SPI_CE0_N",
@@ -52,7 +52,7 @@
"GPIO24",
"GPIO25",
"NC", /* GPIO26 */
- "CAM_GPIO",
+ "CAM_GPIO0",
/* Binary number representing build/revision */
"CONFIG0",
"CONFIG1",
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -71,7 +71,7 @@
"PWR_LOW_N", /* GPIO35 */
"NC", /* GPIO36 */
"NC", /* GPIO37 */
- "NC", /* GPIO38 */
+ "USB_LIMIT", /* GPIO38 */
"NC", /* GPIO39 */
"PWM0_OUT", /* GPIO40 */
"CAM_GPIO0", /* GPIO41 */
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -30,7 +30,7 @@
"SDA1",
"SCL1",
"GPIO_GCLK",
- "CAM_CLK",
+ "CAM_GPIO1",
"LAN_RUN",
"SPI_CE1_N",
"SPI_CE0_N",
@@ -53,7 +53,7 @@
"GPIO24",
"GPIO25",
"NC", /* GPIO26 */
- "CAM_GPIO",
+ "CAM_GPIO0",
/* Binary number representing build/revision */
"CONFIG0",
"CONFIG1",