freifunkist-firmware/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-init.patch

From 3282055a7d0a304d541dbdbe2e32167e1a2f117c Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Mon, 28 Jul 2014 14:20:54 +0200
Subject: [PATCH] mtd: nand: Take nand_ecc_ctrl initialization out of
 nand_scan_tail

Take ECC initialization code portion out of nand_scan_tail so that we can
re-use this implementation.

This commit only moves some code around and makes no functional changes.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/mtd/nand/nand_base.c | 91 +++++++++++++++++++++++++++-----------------
 1 file changed, 56 insertions(+), 35 deletions(-)

--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3892,42 +3892,15 @@ static bool nand_ecc_strength_good(struc
 	return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
 }
 
-/**
- * nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- *
- * This is the second phase of the normal nand_scan() function. It fills out
- * all the uninitialized function pointers with the defaults and scans for a
- * bad block table if appropriate.
+/*
+ * Initialize ECC struct:
+ *  - fill ECC struct with default function/values when these ones are undefined
+ *  - fill ECC infos based on MTD device
  */
-int nand_scan_tail(struct mtd_info *mtd)
+static int nand_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc)
 {
 	int i;
-	struct nand_chip *chip = mtd->priv;
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	struct nand_buffers *nbuf;
 
-	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
-	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
-			!(chip->bbt_options & NAND_BBT_USE_FLASH));
-
-	if (!(chip->options & NAND_OWN_BUFFERS)) {
-		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
-				+ mtd->oobsize * 3, GFP_KERNEL);
-		if (!nbuf)
-			return -ENOMEM;
-		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
-		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
-		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
-
-		chip->buffers = nbuf;
-	} else {
-		if (!chip->buffers)
-			return -ENOMEM;
-	}
-
-	/* Set the internal oob buffer location, just after the page data */
-	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
 
 	/*
 	 * If no default placement scheme is given, select an appropriate one.
@@ -3953,9 +3926,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 		}
 	}
 
-	if (!chip->write_page)
-		chip->write_page = nand_write_page;
-
 	/*
 	 * Check ECC mode, default to software if 3byte/512byte hardware ECC is
 	 * selected and we have 256 byte pagesize fallback to software ECC
@@ -4125,6 +4095,57 @@ int nand_scan_tail(struct mtd_info *mtd)
 	}
 	ecc->total = ecc->steps * ecc->bytes;
 
+	return 0;
+}
+
+/**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ *
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
+ */
+int nand_scan_tail(struct mtd_info *mtd)
+{
+	int ret;
+	struct nand_chip *chip = mtd->priv;
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct nand_buffers *nbuf;
+
+	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
+	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+			!(chip->bbt_options & NAND_BBT_USE_FLASH));
+
+	if (!(chip->options & NAND_OWN_BUFFERS)) {
+		nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+				+ mtd->oobsize * 3, GFP_KERNEL);
+		if (!nbuf)
+			return -ENOMEM;
+		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+		chip->buffers = nbuf;
+	} else {
+		if (!chip->buffers)
+			return -ENOMEM;
+	}
+
+	/* Set the internal oob buffer location, just after the page data */
+	chip->oob_poi = chip->buffers->databuf + mtd->writesize;
+
+	if (!chip->write_page)
+		chip->write_page = nand_write_page;
+
+	/* Initialize ECC struct */
+	ret = nand_ecc_ctrl_init(mtd, ecc);
+	if (ret) {
+		if (!(chip->options & NAND_OWN_BUFFERS))
+			kfree(chip->buffers);
+
+		return ret;
+	}
+
 	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
 	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
 		switch (ecc->steps) {