You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-outpu...

113 lines
3.3 KiB

From 5ca9eadcb5f5cd9af6f1650029ad64052a1a0b10 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Tue, 24 Dec 2013 21:26:17 +0800
Subject: [PATCH] clk: sunxi: Allwinner A20 output clock support
This patch adds support for the external clock outputs on the
Allwinner A20 SoC. The clock outputs are similar to "module 0"
type clocks, with different offsets and widths for clock factors.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++
2 files changed, 58 insertions(+)
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -37,6 +37,7 @@ Required properties:
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
+ "allwinner,sun7i-a20-out-clk" - for the external output clocks
Required properties for all clocks:
- reg : shall be the control register address for the clock.
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -396,6 +396,47 @@ void clk_sunxi_mmc_phase_control(struct
/**
+ * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
+ * CLK_OUT rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div, calcm, calcp;
+
+ /* These clocks can only divide, so we will never be able to achieve
+ * frequencies higher than the parent frequency */
+ if (*freq > parent_rate)
+ *freq = parent_rate;
+
+ div = parent_rate / *freq;
+
+ if (div < 32)
+ calcp = 0;
+ else if (div / 2 < 32)
+ calcp = 1;
+ else if (div / 4 < 32)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = DIV_ROUND_UP(div, 1 << calcp);
+
+ *freq = (parent_rate >> calcp) / calcm;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *m = calcm - 1;
+ *p = calcp;
+}
+
+
+
+/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
@@ -455,6 +496,14 @@ static struct clk_factors_config sun4i_m
.pwidth = 2,
};
+/* user manual says "n" but it's really "p" */
+static struct clk_factors_config sun7i_a20_out_config = {
+ .mshift = 8,
+ .mwidth = 5,
+ .pshift = 20,
+ .pwidth = 2,
+};
+
static const struct factors_data sun4i_pll1_data __initconst = {
.enable = 31,
.table = &sun4i_pll1_config,
@@ -491,6 +540,13 @@ static const struct factors_data sun4i_m
.getter = sun4i_get_mod0_factors,
};
+static const struct factors_data sun7i_a20_out_data __initconst = {
+ .enable = 31,
+ .mux = 24,
+ .table = &sun7i_a20_out_config,
+ .getter = sun7i_a20_get_out_factors,
+};
+
static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
const struct factors_data *data)
{
@@ -998,6 +1054,7 @@ static const struct of_device_id clk_fac
{.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,},
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
+ {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
{}
};