You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
freifunkist-firmware/target/linux/brcm2708/patches-4.14/950-0046-MISC-bcm2835-smi-u...

171 lines
4.8 KiB

brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
6 years ago
From af71606e2a65286f07c5908399f275f62fcbe2b9 Mon Sep 17 00:00:00 2001
From: Martin Sperl <kernel@martin.sperl.org>
Date: Tue, 26 Apr 2016 14:59:21 +0000
Subject: [PATCH 046/454] MISC: bcm2835: smi: use clock manager and fix reload
issues
Use clock manager instead of self-made clockmanager.
Also fix some error paths that showd up during development
(especially missing release of dma resources on rmmod)
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
drivers/misc/bcm2835_smi.c | 86 +++++++++++++-------------------------
1 file changed, 28 insertions(+), 58 deletions(-)
--- a/drivers/misc/bcm2835_smi.c
+++ b/drivers/misc/bcm2835_smi.c
@@ -34,6 +34,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -62,7 +63,7 @@
struct bcm2835_smi_instance {
struct device *dev;
struct smi_settings settings;
- __iomem void *smi_regs_ptr, *cm_smi_regs_ptr;
+ __iomem void *smi_regs_ptr;
dma_addr_t smi_regs_busaddr;
struct dma_chan *dma_chan;
@@ -72,8 +73,7 @@ struct bcm2835_smi_instance {
struct scatterlist buffer_sgl;
- int clock_source;
- int clock_divisor;
+ struct clk *clk;
/* Sometimes we are called into in an atomic context (e.g. by
JFFS2 + MTD) so we can't use a mutex */
@@ -82,42 +82,6 @@ struct bcm2835_smi_instance {
/****************************************************************************
*
-* SMI clock manager setup
-*
-***************************************************************************/
-
-static inline void write_smi_cm_reg(struct bcm2835_smi_instance *inst,
- u32 val, unsigned reg)
-{
- writel(CM_PWD | val, inst->cm_smi_regs_ptr + reg);
-}
-
-static inline u32 read_smi_cm_reg(struct bcm2835_smi_instance *inst,
- unsigned reg)
-{
- return readl(inst->cm_smi_regs_ptr + reg);
-}
-
-static void smi_setup_clock(struct bcm2835_smi_instance *inst)
-{
- dev_dbg(inst->dev, "Setting up clock...");
- /* Disable SMI clock and wait for it to stop. */
- write_smi_cm_reg(inst, 0, CM_SMI_CTL);
- while (read_smi_cm_reg(inst, CM_SMI_CTL) & CM_SMI_CTL_BUSY)
- ;
-
- write_smi_cm_reg(inst, (inst->clock_divisor << CM_SMI_DIV_DIVI_OFFS),
- CM_SMI_DIV);
- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS),
- CM_SMI_CTL);
-
- /* Enable the clock */
- write_smi_cm_reg(inst, (inst->clock_source << CM_SMI_CTL_SRC_OFFS) |
- CM_SMI_CTL_ENAB, CM_SMI_CTL);
-}
-
-/****************************************************************************
-*
* SMI peripheral setup
*
***************************************************************************/
@@ -894,42 +858,40 @@ static int bcm2835_smi_probe(struct plat
struct device_node *node = dev->of_node;
struct resource *ioresource;
struct bcm2835_smi_instance *inst;
+ const __be32 *addr;
+ /* We require device tree support */
+ if (!node)
+ return -EINVAL;
/* Allocate buffers and instance data */
-
inst = devm_kzalloc(dev, sizeof(struct bcm2835_smi_instance),
GFP_KERNEL);
-
if (!inst)
return -ENOMEM;
inst->dev = dev;
spin_lock_init(&inst->transaction_lock);
- /* We require device tree support */
- if (!node)
- return -EINVAL;
-
ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
inst->smi_regs_ptr = devm_ioremap_resource(dev, ioresource);
- ioresource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- inst->cm_smi_regs_ptr = devm_ioremap_resource(dev, ioresource);
- inst->smi_regs_busaddr = be32_to_cpu(
- *of_get_address(node, 0, NULL, NULL));
- of_property_read_u32(node,
- "brcm,smi-clock-source",
- &inst->clock_source);
- of_property_read_u32(node,
- "brcm,smi-clock-divisor",
- &inst->clock_divisor);
+ if (IS_ERR(inst->smi_regs_ptr)) {
+ err = PTR_ERR(inst->smi_regs_ptr);
+ goto err;
+ }
+ addr = of_get_address(node, 0, NULL, NULL);
+ inst->smi_regs_busaddr = be32_to_cpu(addr);
err = bcm2835_smi_dma_setup(inst);
if (err)
- return err;
+ goto err;
- /* Finally, do peripheral setup */
+ /* request clock */
+ inst->clk = devm_clk_get(dev, NULL);
+ if (!inst->clk)
+ goto err;
+ clk_prepare_enable(inst->clk);
- smi_setup_clock(inst);
+ /* Finally, do peripheral setup */
smi_setup_regs(inst);
platform_set_drvdata(pdev, inst);
@@ -937,6 +899,9 @@ static int bcm2835_smi_probe(struct plat
dev_info(inst->dev, "initialised");
return 0;
+err:
+ kfree(inst);
+ return err;
}
/****************************************************************************
@@ -950,6 +915,11 @@ static int bcm2835_smi_remove(struct pla
struct bcm2835_smi_instance *inst = platform_get_drvdata(pdev);
struct device *dev = inst->dev;
+ dmaengine_terminate_all(inst->dma_chan);
+ dma_release_channel(inst->dma_chan);
+
+ clk_disable_unprepare(inst->clk);
+
dev_info(dev, "SMI device removed - OK");
return 0;
}