You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

202 lines
6.0 KiB

--- /dev/null
+++ b/net/mac80211/Kconfig
@@ -0,0 +1,198 @@
+config MAC80211
+ tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
+ select CRYPTO
+ select CRYPTO_ECB
+ select CRYPTO_ARC4
+ select CRYPTO_AES
+ select CRC32
+ select WIRELESS_EXT
+ select CFG80211
+ ---help---
+ This option enables the hardware independent IEEE 802.11
+ networking stack.
+
+menu "Rate control algorithm selection"
+ depends on MAC80211 != n
+
+config MAC80211_RC_PID
+ bool "PID controller based rate control algorithm" if EMBEDDED
+ default y
+ ---help---
+ This option enables a TX rate control algorithm for
+ mac80211 that uses a PID controller to select the TX
+ rate.
+
+choice
+ prompt "Default rate control algorithm"
+ default MAC80211_RC_DEFAULT_PID
+ ---help---
+ This option selects the default rate control algorithm
+ mac80211 will use. Note that this default can still be
+ overriden through the ieee80211_default_rc_algo module
+ parameter if different algorithms are available.
+
+config MAC80211_RC_DEFAULT_PID
+ bool "PID controller based rate control algorithm"
+ depends on MAC80211_RC_PID
+ ---help---
+ Select the PID controller based rate control as the
+ default rate control algorithm. You should choose
+ this unless you know what you are doing.
+
+endchoice
+
+config MAC80211_RC_DEFAULT
+ string
+ default "pid" if MAC80211_RC_DEFAULT_PID
+ default ""
+
+endmenu
+
+config MAC80211_MESH
+ bool "Enable mac80211 mesh networking (pre-802.11s) support"
+ depends on MAC80211 && EXPERIMENTAL
+ ---help---
+ This options enables support of Draft 802.11s mesh networking.
+ The implementation is based on Draft 1.08 of the Mesh Networking
+ amendment. For more information visit http://o11s.org/.
+
+
+config MAC80211_LEDS
+ bool "Enable LED triggers"
+ depends on MAC80211
+ select NEW_LEDS
+ select LEDS_TRIGGERS
+ ---help---
+ This option enables a few LED triggers for different
+ packet receive/transmit events.
+
+config MAC80211_DEBUGFS
+ bool "Export mac80211 internals in DebugFS"
+ depends on MAC80211 && DEBUG_FS
+ ---help---
+ Select this to see extensive information about
+ the internal state of mac80211 in debugfs.
+
+ Say N unless you know you need this.
+
+menuconfig MAC80211_DEBUG_MENU
+ bool "Select mac80211 debugging features"
+ depends on MAC80211
+ ---help---
+ This option collects various mac80211 debug settings.
+
+config MAC80211_DEBUG_PACKET_ALIGNMENT
+ bool "Enable packet alignment debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ This option is recommended for driver authors and strongly
+ discouraged for everybody else, it will trigger a warning
+ when a driver hands mac80211 a buffer that is aligned in
+ a way that will cause problems with the IP stack on some
+ architectures.
+
+ Say N unless you're writing a mac80211 based driver.
+
+config MAC80211_NOINLINE
+ bool "Do not inline TX/RX handlers"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ This option affects code generation in mac80211, when
+ selected some functions are marked "noinline" to allow
+ easier debugging of problems in the transmit and receive
+ paths.
+
+ This option increases code size a bit and inserts a lot
+ of function calls in the code, but is otherwise safe to
+ enable.
+
+ If unsure, say N unless you expect to be finding problems
+ in mac80211.
+
+config MAC80211_VERBOSE_DEBUG
+ bool "Verbose debugging output"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Selecting this option causes mac80211 to print out
+ many debugging messages. It should not be selected
+ on production systems as some of the messages are
+ remotely triggerable.
+
+ Do not select this option.
+
+config MAC80211_HT_DEBUG
+ bool "Verbose HT debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ This option enables 802.11n High Throughput features
+ debug tracing output.
+
+ It should not be selected on production systems as some
+ of the messages are remotely triggerable.
+
+ Do not select this option.
+
+config MAC80211_TKIP_DEBUG
+ bool "Verbose TKIP debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Selecting this option causes mac80211 to print out
+ very verbose TKIP debugging messages. It should not
+ be selected on production systems as those messages
+ are remotely triggerable.
+
+ Do not select this option.
+
+config MAC80211_IBSS_DEBUG
+ bool "Verbose IBSS debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Selecting this option causes mac80211 to print out
+ very verbose IBSS debugging messages. It should not
+ be selected on production systems as those messages
+ are remotely triggerable.
+
+ Do not select this option.
+
+config MAC80211_VERBOSE_PS_DEBUG
+ bool "Verbose powersave mode debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Selecting this option causes mac80211 to print out very
+ verbose power save mode debugging messages (when mac80211
+ is an AP and has power saving stations.)
+ It should not be selected on production systems as those
+ messages are remotely triggerable.
+
+ Do not select this option.
+
+config MAC80211_VERBOSE_MPL_DEBUG
+ bool "Verbose mesh peer link debugging"
+ depends on MAC80211_DEBUG_MENU
+ depends on MAC80211_MESH
+ ---help---
+ Selecting this option causes mac80211 to print out very
+ verbose mesh peer link debugging messages (when mac80211
+ is taking part in a mesh network).
+ It should not be selected on production systems as those
+ messages are remotely triggerable.
+
+ Do not select this option.
+
+config MAC80211_DEBUG_COUNTERS
+ bool "Extra statistics for TX/RX debugging"
+ depends on MAC80211_DEBUG_MENU
+ depends on MAC80211_DEBUGFS
+ ---help---
+ Selecting this option causes mac80211 to keep additional
+ and very verbose statistics about TX and RX handler use
+ and show them in debugfs.
+
+ If unsure, say N.
+
+config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
+ bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
+ depends on MAC80211_DEBUG_MENU
+ ---help---
+ Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
+ debug messages.