|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
#include "danube.dtsi"
|
|
|
|
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
|
|
|
|
/ {
|
|
|
|
compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
|
|
|
|
model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
bootargs = "console=ttyLTQ0,115200";
|
|
|
|
};
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
led-boot = &power_orange;
|
|
|
|
led-failsafe = &power_red;
|
|
|
|
led-running = &power_blue;
|
|
|
|
led-upgrade = &power_blue;
|
|
|
|
|
|
|
|
led-dsl = &broadband_blue;
|
|
|
|
led-wifi = &wireless_blue;
|
|
|
|
};
|
|
|
|
|
|
|
|
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
|
|
|
|
reg = <0x0 0x4000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio-keys-polled {
|
|
|
|
compatible = "gpio-keys-polled";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
poll-interval = <100>;
|
|
|
|
|
|
|
|
reset {
|
|
|
|
label = "reset";
|
|
|
|
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
|
|
|
linux,code = <KEY_RESTART>;
|
|
|
|
};
|
|
|
|
findhandset {
|
|
|
|
label = "findhandset";
|
|
|
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
|
|
linux,code = <KEY_PHONE>;
|
|
|
|
};
|
|
|
|
wps {
|
|
|
|
label = "wps";
|
|
|
|
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
|
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio-leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
|
|
|
upgrading-orange {
|
|
|
|
label = "bthomehubv2b:orange:upgrading";
|
|
|
|
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
|
|
|
|
phone-orange {
|
|
|
|
label = "bthomehubv2b:orange:phone";
|
|
|
|
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
phone-blue {
|
|
|
|
label = "bthomehubv2b:blue:phone";
|
|
|
|
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
|
|
|
|
wireless-orange {
|
|
|
|
label = "bthomehubv2b:orange:wireless";
|
|
|
|
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
wireless_blue: wireless-blue {
|
|
|
|
label = "bthomehubv2b:blue:wireless";
|
|
|
|
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
|
|
|
|
broadband-red {
|
|
|
|
label = "bthomehubv2b:red:broadband";
|
|
|
|
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
broadband-orange {
|
|
|
|
label = "bthomehubv2b:orange:broadband";
|
|
|
|
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
broadband_blue: broadband-blue {
|
|
|
|
label = "bthomehubv2b:blue:broadband";
|
|
|
|
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
|
|
|
|
power_red: power-red {
|
|
|
|
label = "bthomehubv2b:red:power";
|
|
|
|
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
power_orange: power-orange {
|
|
|
|
label = "bthomehubv2b:orange:power";
|
|
|
|
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "keep";
|
|
|
|
};
|
|
|
|
power_blue: power-blue {
|
|
|
|
label = "bthomehubv2b:blue:power";
|
|
|
|
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
|
|
|
|
state_default: pinmux {
|
|
|
|
nand_out {
|
|
|
|
lantiq,groups = "nand cle", "nand ale";
|
|
|
|
lantiq,function = "ebu";
|
|
|
|
lantiq,output = <1>;
|
|
|
|
lantiq,open-drain = <0>;
|
|
|
|
lantiq,pull = <0>;
|
|
|
|
};
|
|
|
|
nand_cs1 {
|
|
|
|
lantiq,groups = "nand cs1";
|
|
|
|
lantiq,function = "ebu";
|
|
|
|
lantiq,open-drain = <0>;
|
|
|
|
lantiq,pull = <0>;
|
|
|
|
};
|
|
|
|
exin {
|
|
|
|
lantiq,groups = "exin1";
|
|
|
|
lantiq,function = "exin";
|
|
|
|
};
|
|
|
|
pci_in {
|
|
|
|
lantiq,groups = "req1";
|
|
|
|
lantiq,function = "pci";
|
|
|
|
lantiq,output = <0>;
|
|
|
|
lantiq,open-drain = <1>;
|
|
|
|
lantiq,pull = <2>;
|
|
|
|
};
|
|
|
|
pci_out {
|
|
|
|
lantiq,groups = "gnt1";
|
|
|
|
lantiq,function = "pci";
|
|
|
|
lantiq,output = <1>;
|
|
|
|
lantiq,open-drain = <0>;
|
|
|
|
lantiq,pull = <0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pci_rst {
|
|
|
|
lantiq,pins = "io21";
|
|
|
|
lantiq,output = <1>;
|
|
|
|
lantiq,open-drain = <0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
btn_in {
|
|
|
|
lantiq,pins = "io2", "io15", "io22";
|
|
|
|
lantiq,output = <0>;
|
|
|
|
lantiq,open-drain = <1>;
|
|
|
|
lantiq,pull = <2>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpios {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&gsw {
|
|
|
|
phy-mode = "rmii";
|
|
|
|
};
|
|
|
|
|
|
|
|
&localbus {
|
|
|
|
nor@0 { /* NOR Flash: Spansion S29AL004D 512KB */
|
|
|
|
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
|
|
|
|
lantiq,cs = <0>;
|
|
|
|
bank-width = <2>;
|
|
|
|
reg = <0 0x0 0x80000>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
partitions {
|
|
|
|
compatible = "fixed-partitions";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
partition@0 {
|
|
|
|
label = "uboot";
|
|
|
|
reg = <0x00000 0x40000>; /* 256KB */
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@40000 {
|
|
|
|
label = "uboot_env";
|
|
|
|
reg = <0x40000 0x10000>; /* 64KB */
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@50000 {
|
|
|
|
label = "rg_conf_1";
|
|
|
|
reg = <0x50000 0x10000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@60000 {
|
|
|
|
label = "rg_conf_2";
|
|
|
|
reg = <0x60000 0x10000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@70000 {
|
|
|
|
label = "rg_conf_factory";
|
|
|
|
reg = <0x70000 0x10000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
nand@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
|
|
|
|
compatible = "lantiq,nand-xway";
|
|
|
|
lantiq,cs = <1>;
|
|
|
|
bank-width = <2>;
|
|
|
|
reg = <1 0x0 0x2000000 >;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
|
|
|
|
|
|
|
|
partitions {
|
|
|
|
compatible = "fixed-partitions";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
ath9k_cal: partition@0 {
|
|
|
|
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
|
|
|
|
reg = <0x00000 0x4000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@4000 {
|
|
|
|
label = "kernel";
|
|
|
|
reg = <0x4000 0x200000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@164000 {
|
|
|
|
label = "ubi";
|
|
|
|
reg = <0x204000 0x1DFC000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&pci0 {
|
|
|
|
status = "okay";
|
|
|
|
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
|
|
|
wifi@168c,0027 {
|
|
|
|
compatible = "pci168c,0027";
|
|
|
|
reg = <0x7000 0 0 0 0>;
|
|
|
|
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_phy {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&vmmc {
|
|
|
|
status = "okay";
|
|
|
|
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|