You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
143 lines
3.9 KiB
143 lines
3.9 KiB
![]()
7 years ago
|
From: Gabor Juhos <juhosg@openwrt.org>
|
||
|
Subject: net: phy: allow to configure AR803x PHYs via platform data
|
||
|
|
||
|
Add a patch for the at803x phy driver, in order to be able
|
||
|
to configure some register settings via platform data.
|
||
|
|
||
|
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
|
||
|
---
|
||
|
drivers/net/phy/at803x.c | 56 ++++++++++++++++++++++++++++++++
|
||
|
include/linux/platform_data/phy-at803x.h | 11 +++++++
|
||
|
2 files changed, 67 insertions(+)
|
||
|
create mode 100644 include/linux/platform_data/phy-at803x.h
|
||
|
|
||
|
--- a/drivers/net/phy/at803x.c
|
||
|
+++ b/drivers/net/phy/at803x.c
|
||
|
@@ -12,12 +12,14 @@
|
||
|
*/
|
||
|
|
||
|
#include <linux/phy.h>
|
||
|
+#include <linux/mdio.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/string.h>
|
||
|
#include <linux/netdevice.h>
|
||
|
#include <linux/etherdevice.h>
|
||
|
#include <linux/of_gpio.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
+#include <linux/platform_data/phy-at803x.h>
|
||
|
|
||
|
#define AT803X_INTR_ENABLE 0x12
|
||
|
#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
|
||
|
@@ -45,6 +47,11 @@
|
||
|
#define AT803X_REG_CHIP_CONFIG 0x1f
|
||
|
#define AT803X_BT_BX_REG_SEL 0x8000
|
||
|
|
||
|
+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
|
||
|
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
|
||
|
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12
|
||
|
+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8)
|
||
|
+
|
||
|
#define AT803X_DEBUG_ADDR 0x1D
|
||
|
#define AT803X_DEBUG_DATA 0x1E
|
||
|
|
||
|
@@ -73,6 +80,7 @@ MODULE_LICENSE("GPL");
|
||
|
struct at803x_priv {
|
||
|
bool phy_reset:1;
|
||
|
struct gpio_desc *gpiod_reset;
|
||
|
+ int prev_speed;
|
||
|
};
|
||
|
|
||
|
struct at803x_context {
|
||
|
@@ -277,8 +285,16 @@ does_not_require_reset_workaround:
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
+static void at803x_disable_smarteee(struct phy_device *phydev)
|
||
|
+{
|
||
|
+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
|
||
|
+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
|
||
|
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
|
||
|
+}
|
||
|
+
|
||
|
static int at803x_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
+ struct at803x_platform_data *pdata;
|
||
|
int ret;
|
||
|
|
||
|
ret = genphy_config_init(phydev);
|
||
|
@@ -299,6 +315,26 @@ static int at803x_config_init(struct phy
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
+ pdata = dev_get_platdata(&phydev->mdio.dev);
|
||
|
+ if (pdata) {
|
||
|
+ if (pdata->disable_smarteee)
|
||
|
+ at803x_disable_smarteee(phydev);
|
||
|
+
|
||
|
+ if (pdata->enable_rgmii_rx_delay)
|
||
|
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
|
||
|
+ AT803X_DEBUG_RX_CLK_DLY_EN);
|
||
|
+ else
|
||
|
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
|
||
|
+ AT803X_DEBUG_RX_CLK_DLY_EN, 0);
|
||
|
+
|
||
|
+ if (pdata->enable_rgmii_tx_delay)
|
||
|
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
|
||
|
+ AT803X_DEBUG_TX_CLK_DLY_EN);
|
||
|
+ else
|
||
|
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
|
||
|
+ AT803X_DEBUG_TX_CLK_DLY_EN, 0);
|
||
|
+ }
|
||
|
+
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
@@ -336,6 +372,8 @@ static int at803x_config_intr(struct phy
|
||
|
static void at803x_link_change_notify(struct phy_device *phydev)
|
||
|
{
|
||
|
struct at803x_priv *priv = phydev->priv;
|
||
|
+ struct at803x_platform_data *pdata;
|
||
|
+ pdata = dev_get_platdata(&phydev->mdio.dev);
|
||
|
|
||
|
/*
|
||
|
* Conduct a hardware reset for AT8030/2 every time a link loss is
|
||
|
@@ -364,6 +402,24 @@ static void at803x_link_change_notify(st
|
||
|
} else {
|
||
|
priv->phy_reset = false;
|
||
|
}
|
||
|
+ if (pdata && pdata->fixup_rgmii_tx_delay &&
|
||
|
+ phydev->speed != priv->prev_speed) {
|
||
|
+ switch (phydev->speed) {
|
||
|
+ case SPEED_10:
|
||
|
+ case SPEED_100:
|
||
|
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
|
||
|
+ AT803X_DEBUG_TX_CLK_DLY_EN);
|
||
|
+ break;
|
||
|
+ case SPEED_1000:
|
||
|
+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
|
||
|
+ AT803X_DEBUG_TX_CLK_DLY_EN, 0);
|
||
|
+ break;
|
||
|
+ default:
|
||
|
+ break;
|
||
|
+ }
|
||
|
+
|
||
|
+ priv->prev_speed = phydev->speed;
|
||
|
+ }
|
||
|
}
|
||
|
|
||
|
static int at803x_aneg_done(struct phy_device *phydev)
|
||
|
--- /dev/null
|
||
|
+++ b/include/linux/platform_data/phy-at803x.h
|
||
|
@@ -0,0 +1,11 @@
|
||
|
+#ifndef _PHY_AT803X_PDATA_H
|
||
|
+#define _PHY_AT803X_PDATA_H
|
||
|
+
|
||
|
+struct at803x_platform_data {
|
||
|
+ int disable_smarteee:1;
|
||
|
+ int enable_rgmii_tx_delay:1;
|
||
|
+ int enable_rgmii_rx_delay:1;
|
||
|
+ int fixup_rgmii_tx_delay:1;
|
||
|
+};
|
||
|
+
|
||
|
+#endif /* _PHY_AT803X_PDATA_H */
|